2004 NISSAN ARMADA engine

[x] Cancel search: engine

Page 218 of 344

NISSAN ARMADA 2004 1.G Owners Manual cMany hills are too steep for any vehicle.
If you drive up them, you may stall. If
you drive down them, you may not be
able to control your speed. If you drive
across them, you may roll over.
cDo not

Page 220 of 344

NISSAN ARMADA 2004 1.G Owners Manual WARNING
Never remove or turn the key to the LOCK
position while driving. The steering wheel
will lock. This may cause the driver to lose
control of the vehicle and could result in
serious vehicle dama

Page 221 of 344

NISSAN ARMADA 2004 1.G Owners Manual 1. Apply the parking brake.
2. Move the shift selector lever to P (Park) or N
(Neutral) . P (Park) is recommended.
The shift selector lever cannot be
moved out of P (Park) and into any of
the other ge

Page 222 of 344

NISSAN ARMADA 2004 1.G Owners Manual If:
1. The engine coolant temperature is not re-
duced.
2. The air conditioning cooling function does
not turn back ON.
3. The engine oil pressure warning/engine
coolant temperature high indicator
il-

Page 223 of 344

NISSAN ARMADA 2004 1.G Owners Manual The recommended operating procedures for this
transmission are shown on the following pages.
Follow these procedures for maximum vehicle
performance and driving enjoyment.
Starting the vehicle
1. Afte

Page 224 of 344

NISSAN ARMADA 2004 1.G Owners Manual R (Reverse):
CAUTION
Use this position only when the vehicle is
completely stopped.
Use this position to back up. Make sure the
vehicle is completely stopped before selecting
the R (Reverse) position.

Page 225 of 344

NISSAN ARMADA 2004 1.G Owners Manual Shift lock release
If the battery is discharged, the shift selector lever
may not be moved from the P (Park) position even
with the brake pedal depressed.
To move the shift selector lever, release the

Page 228 of 344

NISSAN ARMADA 2004 1.G Owners Manual To reset at a slower cruising speed,use one
of the following three methods.
cLightly tap the brake pedal. When the ve-
hicle attains the desired speed, push the
COAST/SET switch and release it.
cPush