INTAKE, EXHAUST – AIR CLEANER15 3
Air Cleaner
Removal and Fitting
Note
The parts marked with a symbol are plastic components which contain recycled paper. Please note the following:
•When fixing or removing, or after fitting parts, be careful not to knock or apply force to these components.
• When assembling, fix the air cleaner body ASSY securely to the air cleaner cover using the clamp on the body.
Remarks
Parts marked with a
symbol use plastic that may contain recycled paper, so when scrapped are burnable.
Removal procedure
1.Battery
2. Air duct
3. Air flow sensor connector4.Air cleaner assembly
5.Air flow sensor
6. Gasket
7. Air cleaner cover8.Air cleaner element
9.Air cleaner body assembly
10. Vacuum hose• Air pipe E, air hose D, air by pass valve
assembly, air by pass hose.
• Oil level gauge assembly11.Air intake hose
12.Wastegate solenoid valve connector
13. Vacuum hose connection
14. Wastegate solenoid valve assembly15.Air cleaner bracket
GENERAL INFORMATION - LIST OF CIRCUIT DIAGRAMS0-5
Main circuit Name of Circuit Circuit Diagram
J/B -!
J/C -#
Central junction -#
Power supply -#
Start up -!
Ignition -!
Charging -!
Engine control -#
Coolant -!
Headlights (excluding discharge type )!
Headlight ( discharge type)!
Tail lights, side lights, licence plate lights, lighting monitor
warning buzzer!
Cabin lights, boot interior light, ignition key cylinder
illumination light, door not closed indicator light *2!
Fog lights!
Lighting
Headlight levelling system
!
Indicator lights, hazard warning lights!
Reversing lights *2!
Stop lights#
Signalling
Horn
!
Meters / Gauges *2!Meters
Remaining fuel warning light, oil pressure warning light,
brake warning light, seatbelt warning light *2
!
Electric windows *2!
Central door locking (vehicle not fitted with keyless entry)!
Door opening control
Central door locking (vehicle fitted with keyless entry)
!
Heater!
Fully automatic air conditioning!
Air conditioning
Manual air conditioning
#
List of Circuit Diagrams
M3000006000169
Notes:
1. This list of circuit diagrams indicates whether each circuit has been modified or added.
2. The “●” symbol indicates a circuit that has been modified or added. Diagrams for these circuits are included in
this supplement.
3. The “
” symbol indicates a circuit that is unchanged. Details of these circuits can be found in the existing
Electrical Wiring Diagram manual (’03-1 No.1036K77).
4. The “X” symbol indicates a circuit that is unrelated to the vehicle referred to in this manual.
5. The “*1” symbol marks circuits whose names have been changed the previous names.
6. The “*2” symbol marks circuits whose J/C terminal numbers have changed. For more information, please refer
to the “Details of Changes” table above.
