2004 Mercury Marauder wheel

[x] Cancel search: wheel

Page 145 of 224

Mercury Marauder 2004  Owners Manuals ²Turn the tie-down fastener clockwise to tighten the road wheel.
11. Turn on the air suspension switch (if equipped).
Wheel lug nut torque specifications
Retighten the lug nuts to the specified torqu

Page 150 of 224

Mercury Marauder 2004  Owners Manuals WRECKER TOWING
If you need to have your vehicle towed, contact a professional towing
service or, if you are a member of a roadside assistance program, your
roadside assistance service provider.
It is

Page 161 of 224

Mercury Marauder 2004  Owners Manuals ²Remove particles such as bird droppings, tree sap, insect deposits, tar
spots, road salt and industrial fallout before repairing paint chips.
²Always read the instructions before using the products

Page 163 of 224

Mercury Marauder 2004  Owners Manuals Do not use sharp objects, such as a razor blade, to clean the
inside of the rear window or to remove decals, as it may cause
damage to the rear window defrosters heated grid lines.
INSTRUMENT PANEL A

Page 165 of 224

Mercury Marauder 2004  Owners Manuals Motorcraft Vinyl Cleaner (Canada only) (CXC-93)
Motorcraft Vinyl Conditioner (Canada only) (CXC-94)
Motorcraft Deluxe Leather and Vinyl Cleaner (not available in Canada)
(ZC-11±A)
Motorcraft Bug and

Page 167 of 224

Mercury Marauder 2004  Owners Manuals Working with the engine off
1. Set the parking brake and shift to P (Park).
2. Turn off the engine and remove the key.
3. Block the wheels.
Working with the engine on
1. Set the parking brake and shif

Page 187 of 224

Mercury Marauder 2004  Owners Manuals Habits
²Smooth, moderate operation can yield up to 10% savings in fuel.
²Steady speeds without stopping will usually give the best fuel
economy.
²Idling for long periods of time (greater than one m

Page 191 of 224

Mercury Marauder 2004  Owners Manuals 2. While the engine idles, turn the steering wheel left and right several
times.
3. Turn the engine off.
4. Check the fluid level in the
reservoir. It should be between the
MIN and MAX lines. Do not a