2004 Mercury Marauder wheel

[x] Cancel search: wheel

Page 128 of 224

Mercury Marauder 2004  Owners Manuals Launching or retrieving a boat
Disconnect the wiring to the trailer before backing the trailer
into the water. Reconnect the wiring to the trailer after the
trailer is removed from the water.
When bac

Page 132 of 224

Mercury Marauder 2004  Owners Manuals Note:Always replace a fuse with one that has the specified amperage
rating. Using a fuse with a higher amperage rating can cause severe wire
damage and could start a fire.
Standard fuse amperage ratin

Page 139 of 224

Mercury Marauder 2004  Owners Manuals CHANGING THE TIRES
If you get a flat tire while driving, do not apply the brake heavily.
Instead, gradually decrease your speed. Hold the steering wheel firmly
and slowly move to a safe place on the s

Page 140 of 224

Mercury Marauder 2004  Owners Manuals Your vehicle may be equipped with a dissimilar spare tire/wheel. A
dissimilar spare tire/wheel is defined as a spare tire and/or wheel that is
different in brand, size or appearance from the road tire

Page 141 of 224

Mercury Marauder 2004  Owners Manuals Tire change procedure
To help prevent the vehicle from moving when you change a tire,
be sure the parking brake is set, then block (in both directions)
the wheel that is diagonally opposite (other sid

Page 142 of 224

Mercury Marauder 2004  Owners Manuals On vehicles equipped with
Air Suspension, turn OFF
the Air Suspension switch prior to
jacking, hoisting or towing your
vehicle.
Refer toAir suspension systemin
theDrivingchapter for more
information.

Page 143 of 224

Mercury Marauder 2004  Owners Manuals JACK LOCATION-FRONT
The jack location markings can be
foundon the lower outer edge of
the body.
²Locate the jack locator mark (B -
circle) on the body (C) near the
tire you are changing, then place
t

Page 144 of 224

Mercury Marauder 2004  Owners Manuals ²Never use the rear differential
as a jacking point.
6. Remove the lug nuts with the lug wrench.
7. Replace the flat tire with the spare tire, making sure the valve stem is
facing outward. Reinstall