2004 MERCEDES-BENZ M-Class light

50 AudioCD operation
CD player locations
The single CD player* is located behind
the MCS control panel
You can play audio CDs or read data
from the navigation DVD.

The 6 disc CD changer*.
The status line in the main CD menu indi-
cates which component is being used for
CD playback.Tips on caring for your CDs

Only touch the CD on the sides.

Avoid touching the CD recording sur-
face with your fingers.

Clean the CD with a dry, lint-free cloth.
Wipe the CD in a straight line from the
center. Never wipe the CD in a circular
motion.

Do not use rubbing alcohol or solvents
to clean the CDs.

Do not expose the CDs to heat or direct
sunlight.

Do not write or put stickers on CDs.
General information on CD modeWarning
G
The single CD player and CD changer are
Class 1 laser products. There is a danger of
invisible laser radiation if the cover is
opened or damaged.
Do not remove the cover. The single CD
player and the CD changer do not contain
any parts which can be serviced by the user.
For safety reasons, have any necessary ser-
vice work performed only by qualified per-
sonnel.
!Use only CDs with a diameter of 12 cm;
do not use 8-cm CDs.
An 8-cm CD adapter may cause damage
to the CD changer and should not be
used.

58 AudioCD operation
CD changer mode: MAG. EMPTY -
there are no CDs in the magazine. Eject
the CD changer magazine and insert
CDs.

CD changer mode: NO MAGAZINE -
there is no magazine in the CD chang-
er. Insert a loaded magazine into the
CD changer.

CD changer mode: CHANGER ERROR
- have the MCS and the CD changer
checked by an authorized Mercedes-
Benz Center.

Press a number key, e.g. to se-
lect the corresponding CD.
The screen as shown above appears for
4 seconds. The selected CD will be
highlighted. If the selected magazine
slot is empty, the NO CD message and
the number of the selected slot ap-
pears on the screen. The next CD in-
serted will be selected.Playback begins with track 1 of the select-
ed CD.
iIn the CD, radio and tape modes icons
are displayed for an inserted CD (single
CD player) or a connected and loaded
CD changer.
Selecting a CD
MCS with CD changer
iAfter the last track of the current CD
has been played, the next CD inserted in
the magazine is selected and playback
continues with track 1.

60 AudioCD operationForward
Push the joystick to .
The CD seeks forward as long as you
push the joystick.
Backward

Push the joystick to .
The CD seeks backward as long as you
push the joystick.The tracks on a CD can be scanned in suc-
cession for 8 seconds each.
Activating scan

Press the softkey SCAN.
Scan begins and SCAN is highlighted in
the softkey menu.Cancelling scan

Press the highlighted softkey
SCAN.
or

Push the joystick in any direction.
Playback resumes with the desired
track.
Music seek
CD track scan

61 Audio
CD operation
Activating repeat
Press the softkey RPT.
The current track repeats until you
switch the function off.
The repeat mode is activated when
RPT is highlighted in the softkey menu.
Cancelling repeat mode

Press the highlighted softkey
RPT.Activating random play

Press the softkey RDM.
The tracks on the currently selected CD
play back in a random order.
The random mode is activated when
RDM is highlighted in the softkey menu.Selecting the next / previous track

Push the joystick to or .
The next or previous track in the ran-
dom list plays.
Cancelling random play

Press the highlighted softkey
RDM.
CD track repeat
iYou cannot activate the repeat mode
and the random mode at the same time.
You can only select one mode at a time.CD track random play
iYou cannot activate the repeat mode
and the random mode at the same time.
You can only select one mode at a time.

63 Audio
Audio Adjustment

Audio Adjustment
The sound settings for all audio sources
can be adjusted.
Audio sources include
Radio FM, AM, WB

Satellite radio*

Tape

CD (Single CD*, CD changer*)
Each audio source has its own audio ad-
justments for bass and treble.
All audio sources share the balance and
fader functions.Setting Bass/Treble/Balance/Fader

Press the softkey ADJ in any au-
dio menu.
Your current settings are displayed in
the main audio adjust menu.To select the parameter you want to
adjust, press the softkeys
or .
The selected parameter is highlighted.

To set the desired values, press the
softkeys - and + or L and R.

To reset the selected parameter press
and hold both softkeys , - and +
or L and R for longer then 2 seconds.

Once you are satisfied with the sound
setting, press the softkey EXIT.
Audio AdjustmentiIf your vehicle is equipped with the
Bose
® Audiopilot
TM digital processor,
digital electronics will continually sepa-
rate program material from ambient
noise and modify the programming sig-
nal so that you can enjoy the full musi-
cal performance without making any
adjustments.
The normal operation of the Bose
®
Audiopilot
TM could be interpreted as
volume fluctuations, however this is
normal operation.

83 Telephone*
Telephone* operation
Function
Page
1
Unlock code menu
84
2
Main telephone menu
3
Telephone roaming indicator
S: Signal
R: Roaming
R (highlighted): Roaming on
non-home type system
4
Signal strength meter
5
Incoming call
85
6
Alphabetic phone book
88
7
Numeric phone book
89

89 Telephone*
Telephone* operation

By pushing the joystick up or down, you
can select the desired name.
The selected name is highlighted.
or

By pushing the joystick to the left or
the right, you can jump to the next or
previous page of the list.
Begin dialing:

If you have found the right name, press
.
Ending the call:

Press .Opening the numeric scrolling mode

Make sure the main telephone menu is
displayed.

Press the softkey NUM.
or

Enter up to 2 letters with the number
keys through (e.g.: ).

To correct the last digit, press .

By pushing the joystick up or down, you
can select the desired number.
The selected number is highlighted.
or

By pushing the joystick to the left or
the right, you can jump to the next or
previous page of the list.
Begin dialing:

If you have found the right number,
press .
Ending the call:

Press .

90 Telephone*Telephone* operationRedial
You can redial the last 10 numbers dialed.
Make sure the main telephone menu is
displayed.

Press .
The number list appears on the display.

By pushing the joystick up or down, you
can select the desired number.
The selected number is highlighted.or

By pushing the joystick to the left or
the right, you can jump to the next or
previous five numbers in the list.
Begin dialing:

If you have found the right number,
press .
Ending the call:

Press .Speed-dialing

Make sure the main telephone menu is
displayed.

Enter the memory location number us-
ing the number keys through
.
You can enter up to 2 digits.
iIf there is no entry in the numbers list,
the message LAST NUMBERS MEMO-
RY EMPTY appears in the telephone
menu.
Warning
G
If you enter“1” and confirm this memory lo-
cation as described in “Begin dialing”, the
default emergency number 9-1-1 is dialed.
The 9-1-1 emergency call system is a public
service. Using it without due cause is a crim-
inal offense.