Page 142 of 453

139
Controls in detail
Automatic transmiss ion*
1 Shiftran ge/s elector lever position
2 Gearshif tprogram (S/C) or (S/C/M)*
The current shift range and the gearshift
program (
S/C) or (S/C/M)* are displayed
in the speedometer.
When the selector lever is in position D,
you can influence the gearshifts made by
the automatic transmissi onby:
! restricting the shift range
! chang ing gear yourself P 54.30-
5564-31 Selec
tor lever positions ì Parking lock
Prevents the vehicle from rolling
away when stopped. Only
move
the selector lever toPwhen the
ve hicle isstationary.
You can only remove the key
when the selector lever isin
position P. The selector lever is
lo cked in position Pwh en the key
is re moved. í Reverse gear
Only mo
vethe selector lever to R
when the vehicle is statio nary. ë Neutral
No power is transmitted
from the
engine to the dr ive wheels.
Releasing the brakes allows you
to move the vehicle freely, e.g. by
pushing or towing.
Do not move the selector lever to
N while the vehicle is in motion.
The automatic transmission
co uld otherwise bedamag ed.
If ESP has been deactivated or
has malfunctioned: only move the
selector lever to Nif the vehicle is
in danger of skidding, e.g. on icy
roads. ê Drive
The automatic transmission
chan
ges gear automatically. All
fi ve forward gears are available. 209en_d2.boo Seite
139 Dienstag, 25. Mai 2004 7:26 19
Page 152 of 453

149
Controls in detail
Good visi bility
! If electrolyte drips onto the vehicle 'spai nt-
work, immediately rinse the pai ntworkthor-
oughly with clean wa ter. Oth erwise, the
el ectrolyte could damage the paintwork.
Electrol yte can only be ri nsed off before it has
dried. Foldin
gthe exteri ormirro rsin/o ut*
The buttons are located above the parking
brake release handle.
1 To fold in the exterior mirrors
2 To fold out the exterior mirrors
6 Make sure that the ignition is switched
on.
Folding in the mirrors 6 Briefly press button 1.
Folding out the mirrors 6 Briefly press button 2.G
Risk of accident If incident headlamp ligh
tcannot strike the
sensor in the rear-view mirror, for instance,
if the rear window blind is extended, the mir-
ror's automatic anti-dazzle function will not
operate.
You could be dazzled byincident light. As a
result, you may nolon ger be able to observe
road and tra ffic condition sand cau sean
accid ent.In this case , flick theanti-dazzle
lever over by hand so that the rear-view mir-
ror goes into anti-dazzle mode ( =
page 148).
Do not permanently dea ctivate the anti-daz-
zle function. G
Risk of injury Electrolyte
may escapeif the glass in an
automatic anti-dazzl emirror brea ks.
El ectrolyte is a strong irritant and must not
be allowed to come into contact with your
skin, ey esor respiratory organ s.
If electrolyte comes into contact with your
eyes or skin, immediately rinse thoroughly
with clean water. Cons ult a do ctor ifnec es-
sary. P88.70-2136-31209en
_d2.boo Seite 149 Dienstag, 25. Mai 2004 7:26 19
Page 171 of 453

168 Controls in detail
Thermotronic* (intelligent air conditio
ning)
Set the temperature separately for each
side of the vehicle using controls 3and
d and 6and bfor the driver's side and
front-passenger side respectively.
Only change th etemperature in small
increments, idea lly starting at 22 °C. Increasing the tempe
rature
6 Pres s and hol dtemperature button 3
or 6 with the red triangle until the
required temperature appears in the
control panel display.
Thermotronic adj usts to the set tem-
pe rature. Re
ducing the temperatu re
6 Press and hol dtemperature button b
or d with the blue triang leuntil the
required temperature appears in the
contro lpanel display.
Thermotronic adj usts to the set tem-
pe rature. You can adjus
tair distribution separately
for each side of the vehicle automatically
( = pa ge 167) using the Ubutton or
manually.
The symbols on the air distribution display
have the following meaning: Controlling
airdi stribution manually
6 Turn air-distrib ution control 1or8 to
the desired symbol.
The indicator lamp in the Ubutton
goes out. Auto matic air distribution is
switched off. Air distribution iscontrol-
led according to the position of the
control selected.
Co ntr olling air distribution for the cock- pit air vent
6
Open the air vent at the top of the cock-
pit.
The air is distributed evenly in cooling
mode. Setting
thetemperature Co
ntrolling air distribution manually Symbol Meaning
Z Directs air to the windscreen
and
through the dem iste r
vents to the side windows b Dire
cts air to the wind-
screen, through the centre,
side and coc kpit air vents,
through the demister vents
to the side windows, and
into the front and rear foot
wells Y Directs air into
the front and
rear footwells a Dire
cts air through the cen-
tre, side and cockpit air
vents 209en_d2.boo Seite
168 Dienstag, 25. Mai 2004 7:26 19
Page 194 of 453