Page 271 of 453

268 Operation
CareAutomatic car wash
You can cl
ean the vehicle in an automatic
ca rw ash fr om the very st art. It isad vis able
to use automatic car washes without
brushes.
If the vehicle is very dirty, prewash it be-
fore you drive into the car wash.
After using anautom atic ca rwash, wipe off
wax fro mthe windscreen and the wiper
blades. This prevents smears.
! Make sure that the automatic car wash is
suitable for the size of the vehicle. Fold in the ex-
terior mirrors befor egoing through a car wash.
Make sure that the windscreen-wi per switch is
set to 0 ( =
pag e41). The exterior mirrors or
windscreen wipers cou ldotherwise be damaged.
i Make sure that the mirrors are fully folded
out whe nyou leave the automatic car wash. They
co uld oth erwise vibrate. High-pressure cleaners
!
Do not use high-pressure cleaners with
round-spray jet sfor cleaning the tyres. You could
ot he rwise damage the tyres .Replace damaged
tyres.
6 Direct the high-pressure cleaner nozzle
at the vehicle from a distance of at
least 30 cm.
6 Move the high-pressure cleaner nozzle
around when cleanin gyour vehicle.
! Do no tdirect it at door joints, air spring
bellows, ele ctrica l compone nts,conne ctors or
seals.
Clea ning the windscreen and wiper blades
6
Turn the ignition key to position 1.
6 Turn the windscreen wipers to
position Ion the combination switch
( = page 41).
6 Turn the ignition key to 0wh en the wip-
er arms are vertical. !
Fold the windscree nwipers away from the
windscreen only whe nthe yare vertical, other-
wise you will damage th ebonnet.
6 Fold the wiper arms away from the
windscreen until you feel them click
into place.
6 You can now clean the windscreen.
6 Fold the windscreen wipers back again
before you switch on the ignition. Vehicle care
G
Risk of injury Turn th
eignition key to 0before cleaning
the windscreen or wiper blade s.The wind-
sc reen wipers could otherwise move and in-
jure you. 209en_d2.boo Seite
268 Dienstag, 25. Mai 2004 7:26 19
Page 332 of 453
329
Practical advice
Tr ou bleshooting Wi
nds creen wipers Problem Possible caus
e/consequ ence Suggested sol
utions The windscreen wipers are
jammed. Leaves or snow, for example, may be pre-
ve
nting the windscreen wipers from mov-
in g. The wiper motor has switched off. 6
For safety reasons, you should remove
the key from the ignition lock.
6 Remove the cause of the obstruction.
6 Switch on the windscreen wipers again. The windscreen wipers have failed com-
pletely. The windscreen wiper dri
ve is faulty. 6
Select a different wiper speed on the
combination switch.
6 Have the windscreen wipers checked at
a qual ified specialist workshop, e.g. a
Mercedes-Benz Serv ice Ce ntre. 209en_d2.boo Seite
329 Dienstag, 25. Mai 2004 7:26 19
Page 365 of 453

362 Practical advice
Replacing the wiper bladesRemoving
i
Replace the wiper blades twice a year,
preferably inspring and autumn.
For your conveni ence, have this work carried
out at aquali fied specialist wor kshop, e.g. a
Me rcede s-Be nz Service Cen tre.
6 Foldthe wiper arm away from the wind-
screen.
When doing so, only hold the wiper
arm. You must feel it engage in posi-
tion. 1
To lock
2 To open
6 Pullthe retaining clip in the direction of
arrow 2and remove the windscreen
wiper. Fitting
6
Slide the wiper blade into the recess on
the wiper arm.
6 Slide the retaining clip back in the di-
rection of arrow 1until itengages.
6 Fold the wiper arm onto the wind-
screen again.
When doing so, only hold the wiper
arm.
! Never open the bonnet when the wiper arm
is folded away from the windscreen.
Do not fol dthe wiper ar monto the windscreen if
a wiper blade is not fitted.
For your convenience, have this work carried
out at a qualified spe cialist workshop, e.g. a
Mercedes-Benz Service Centre. Replacing the wiper blades
G
Risk of inju ry Remove the
key from the ignition lock be-
fore you repl ace a wiper blade. The wind-
screen wipers could otherwise be set in
motion and inj ure you. P 82.30-2165
-31 209en_d2.boo Seite
362 Dienstag, 25. Mai 2004 7:26 19
Page 419 of 453