109 Controls in detail
Control system
Control system
The control system is activated as soon as
the SmartKey in the starter switch is
turned to position1. The control system
enables you to
call up information about your vehicle
change vehicle settings
For example, you can use the control sys-
tem to find out when your vehicle is next
due for service, to set the language for
messages in the instrument cluster dis-
play, and much more.
The control system relays information to
the multifunction display.
Multifunction display
1Outside temperature
2Main odometer
3Trip odometer
4Automatic transmission program mode
5Current gear selector lever position
6Digital clock
iThe displays for the audio systems (ra-
dio, CD player, cassette player) will ap-
pear in English, regardless of the
language selected.
Warning!
G
A driver’s attention to the road and traffic
conditions must always be his /her primary
focus when driving.
For your safety and the safety of others, se-
lecting features through the multifunction
steering wheel should only be done by the
driver when traffic and road conditions per-
mit it to be done safely.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is
covering a distance of 44 feet (approximate-
ly 13.5 m) every second.
121 Controls in detail
Control system
The table below shows what settings can
be changed within the various menus. De-
tailed instructions on making individual
settings can be found on the following
pages.INSTRUMENT CLUSTER
LIGHTING
VEHICLE
CONVENIENCE
Set time (hours)
Set daytime running lamp mode
(USA only)
Set station selection mode
(radio)
Activate easy-entry/exit feature
Set time (minutes)
Set locator lighting
Set automatic locking
Set key-dependency
Select time display mode
Exterior lamps delayed shut-off
Set parking position for exterior
rear view mirror
Select temperature display
mode
Interior lighting delayed shut-off
Select speedometer display
modeSelect languageSelect display (speed display or
outside temperature)
122 Controls in detailControl systemInstrument cluster submenu
Access the
INSTRUMENT CLUSTER
submenu
via the
SETTINGS
menu. Use the
INSTRU-
MENT CLUSTER
submenu to change the in-
strument cluster display settings. The
following functions are available:Set time (hours)
This function can only be seen with audio
system.
Move the selection marker with
theæ orç button to the
IN-
STRUMENT CLUSTER
submenu.
Press buttonj ork repeatedly
until you see this message in the dis-
play:
TIME SETTINGS – HOURS
.The selection marker is on the hour set-
ting.
Pressæ orç to set the hour.
Set time (minutes)
This function can only be seen with audio
system.
Move the selection marker with
theæ orç button to the
IN-
STRUMENT CLUSTER
submenu.
Function
Page
Set time (hours)
122
Set time (minutes)
122
Select time display mode
123
Select temperature display
mode
123
Select speedometer display
mode
124
Select language
124
Select display (speed display or
outside temperature)
125
iVehicles with COMAND*: For informa-
tion on setting the time, refer to the
separate COMAND operating instruc-
tions.
iVehicles with COMAND*: For informa-
tion on setting the time, refer to the
separate COMAND operating instruc-
tions.
