HOMELINK®
Always check the Owner’s Manual for more operating information and safety features
HomeLink®
Interior
Lights
Quick Tips 2004 Mazda Mazda RX-8 page 12
page 13
Turn ignition on; verify device
operation by pressing HomeLink®
button (1) that was just programmed;
repeat procedure for other buttons
Rolling code synchronization
procedure
Refer to your garage door opener or
device instruction manual to confirm
your system is equipped with a
rolling code feature
Tip: This procedure is easier
done with the assistance of
another person
To synchronize: Press programming
button on garage door opener motor;
press and release the programmed
HomeLink
®button 2 times within 30
seconds of pressing the garage door
opening motor programming button
Some devices may require you to
press and release a third time to
complete programming procedure HomeLink
®Wireless
Control System*
Located on rear view mirror
To program or reprogram:
Ignition must be off; hold
transmitter for the device to
be programmed between 1-3
inches to HomeLink
®; press
transmitter button and desired
HomeLink
®button (1) simultaneously
until HomeLink®indicator light
goes from slow to rapid flashingAuto-dimming rear
view mirror
Auto-dimming function changes
are based on outside lighting
conditions and if bright headlights
are visible in rear view mirror
Press on (2), off (3)
*Denotes optional equipment
1. Map/reading light
Press on/off
2. Interior light switch
DOOR = light on when door open
ON = light always on
OFF = light always off
3. Front interior light
4. Rear interior light
5. Sunglass holder
Press concaved lip then open
6. Sunroof tilt switch*
Press rear of switch to tilt rear
of sunroof
Press front of switch to close
7. Sunroof slide switch*
Press rear of switch to open
sunroof
Press front of switch to close
Illuminated visor mirrors
Mirrors lighted when covers open;
off when closed
123
OFFDOO
R
T
I
L
TSL
IDE
121
53367
ONOFFDOOR
2
4
