14
Before Use
13
Pop Up Menu
Pop Up menu appears when pressing .
This function is mainly used during route searches.
Route change ( page 26)When route has
been set or route
in operation
Route display ( page 25)
Route list display
Marked point registration ( page 28)
Map orientation change ( page 19)
Rerouting
Change of routing Search method( page 21)
Change volume
Switches guidance on/off
Stop route Search ( page 25)
Direct destination input
with the joystick ( page 24)
When scroll map
is displayed
Near POI (Point of Interest) search
(within a radius of about 6 mile) ( page 24)
Example : When is selected.
Detour submenu
Highlighted
NoteAppears only when the auto reroute
function ( page 32)is inactivated.
Note
This function is not available on intersection zoom maps.
ENTER
Do not star
The vehicle
depending
is calculati The mobile n
calibrated fo
1. When usin
2. When the
3. When the
wheel dia
4. When del
LtSo
Make sure t
Drive the veh
(12.5 MPH) w
Notes
Befo
Resetting
e 28)
19)
page 21)
page 24)
uto reroutes inactivated.
Do not start driving until the opening screen and warning screen close.
The vehicle position indicator may disappear temporarily after the speed is increased
depending on the vehicle model. This is a normal phenomenon indicating that the system
is calculating the distance correction. The mobile navigation system uses GPS data for distance correction. It must be properly
calibrated for accurate operation. Perform calibration in any of the following circumstances:
1. When using the navigation system for the very first time after installing the system.
2. When the navigation system is transferred to another vehicle.
3. When the tire pressure is changed, tires are rotated, the spare tire is used, tire size, or
wheel diameter is changed.
4. When deleting the position correction learning results.
Notes
Before Use
14
Make sure the GPS reception indicator is illuminated on the map screen.
GPS reception indicator Drive the vehicle in an open area for approximately 30-minutes at a speed over 20 kph
(12.5 MPH) while receiving GPS signals.
Notes
15
Before UseSystem Operation Verification
Automatic distance correction check
Resetting automatic distance correction
