2004 MAZDA MODEL MX-5 MIATA reset

6-32
Interior Comfort
Au di o S ys t em
Form No. 8S15-EA-03G

Operating the In-Dash CD Changer*
Inserting the CD
The CD must be label-side up when
inserting. The auto-loading mechanism
will set the CD and begin play. There will
be a short lapse before play begins while
the player reads the digital signals on the
CD.
The disc number, the track number and
the elapsed play back time for the current
track will be displayed.
Display CD slot
Disc-in indicator
CD ejectbutton
CD play button
Random button
Repeat button
Disc up button Scan
button
Fast-forward
button
Reverse button
Track up
button
Track down
button
Disc down
button
Load button
Power/Volume dial
Channel preset buttons
NOTE
•When the clock is displayed, the
elapsed play back time will not be
displayed. To display the elapsed
play back time, turn the audio
control dial to the right. Turn the
dial to the left to return to the
previous display.
• A CD cannot be inserted while the
display reads "WAIT". A beeping
sound can be heard during this
waiting time. Simultaneously
pressing the power/volume dial and
the load button ( ) for about 2
seconds will turn this beeping sound
ON or OFF.
*Some models.
J07S_8S15-EA-03G_Edition2.book Page 32 Thursday, August 21, 2003 10:04 AM

6-33
Interior Comfort
Au di o S ys t em
Form No. 8S15-EA-03G
Normal insertion
1. Press the load button ( ).
2. When "In" is displayed, insert the CD.
Inserting CDs into desired tray number
1. Press and hold the load button ( ) for about 2 seconds until a beep is
heard.
2. Press the channel preset button for the desired tray number within 3 seconds
after the beep is heard.
3. When "In" is displayed, insert the CD. Multiple insertion
1. Press and hold the load button ( )
for about 2 seconds until a beep is
heard.
2. When "In" is displayed, insert the CD.
3. When "In" is displayed again, insert the next CD.
NOTE
The CD cannot be inserted to the
desired tray number if the number is
already occupied.
NOTE
The first-inserted CD will be played
automatically when:
•No other CD is inserted within 15
seconds after "In" is displayed.
• The CD trays are full.
J07S_8S15-EA-03G_Edition2.book Page 33 Thursday, August 21, 2003 10:04 AM

6-34
Interior Comfort
Au di o S ys t em
Form No. 8S15-EA-03G
Ejecting the CD
Normal ejection
1. Press the CD eject button ( ). The disc number and "DISC OUT" will be
displayed.
2. Pull out the CD.
Ejecting CDs from desired tray number
1. Press and hold the CD eject button ( ) for about 2 seconds until a beep is
heard.
2. Press the channel preset button for the desired CD number within 3 seconds
after the beep is heard.
3. Pull out the CD.
Multiple ejection
1. Press and hold the CD eject button ( ) for about 2 seconds until a beep is
heard.
2. Wait 3 seconds or press the CD eject button ( ) again within 3 seconds
after the beep is heard.
3. Pull out the CD, then the next CD will be ejected. Playing
Press the CD play button ( ) to start
playing when a CD is in the unit.
Fast-forward/Reverse
Press and hold the fast-forward button
( ) to advance through a track at high
speed.
Press and hold the reverse button ( )
to reverse through a track at high speed.
Tr a c k s e a r c h
Press the track up button ( ) once to
skip forward to the beginning of the next
track.
Press the track down button ( ) once to
skip back to the beginning of the current
track.
Disc search
Press the disc up button ( ) to skip
forward to the beginning of the next CD.
Press the disc down button ( ) to
skip back to the beginning of the previous
CD.
NOTE
When the CD is ejected during play,
the next CD will be played
automatically.
NOTE
•
CDs will be ejected starting with the
one with the lowest number.
• All CDs in the tray will be ejected
continuously.
• CDs can be ejected when the
ignition switch is off. Press and hold
the CD eject button ( ) for about 2
seconds and all CDs will eject.
J07S_8S15-EA-03G_Edition2.book Page 34 Thursday, August 21, 2003 10:04 AM

6-38
Interior Comfort
Au di o S ys t em
Form No. 8S15-EA-03G

Antitheft System*
To deter theft of your vehicle
’s audio unit,
it has an integrated antitheft system. The
system is designed to accept a code
number that makes the unit inoperable if it
is stolen.
This system will be activated if the power
source is ever disconnected from or in any
way interrupted to the audio unit. When
the system is activated, the audio system
will not operate when reconnected to a
power supply, and "CODE" will flash on
the display until the correct code number
is input. If the antitheft system is
activated, reset the unit.
Display
Auto memory
button
Channel preset buttons
Antitheft indicator light
Read and understand all code setting
procedures before attempting to input
your personal code number.
The personal code number is only
shown on the audio unit display while
it is being set. Once it is input and
stored by the unit, it is never again
displayed. For that reason, be very
careful to immediately record your
personal code number, and never let an
unauthorized person set a code.
NOTE
Although the audio unit is operable
without the code number being set, we
recommend that you set your personal
code number.
CAUTION
*Some models.
J07S_8S15-EA-03G_Edition2.book Page 38 Thursday, August 21, 2003 10:04 AM

6-39
Interior Comfort
Au di o S ys t em
Form No. 8S15-EA-03G
Setting procedure
1. Begin with the audio unit off and the ignition switch is in the ACC position.
2. Press the auto memory button ( ) and the channel preset button 6
simultaneously for about 2 seconds
until "CODE" is displayed.
3. Again press the auto memory button ( ) and the channel preset button
6 simultaneously while "CODE" is
displayed (within 10 seconds). The
display will exhibit bars.
4. While the bars are displayed, input your personal code number by pressing
channel preset buttons 1, 2, 3, and 4. Press 1 for the first digit, 2 for the second,
3 for the third, and 4 for the last digit. For
example, if your number is 2547, press 1
three times, 2 six times, 3 five times, and 4
eight times. If the display goes off while
inputting, begin from Step 1.
5. While the code number is displayed,
press the auto memory button ( )
and the channel preset button 6
simultaneously for about 2 seconds and
"CODE" begins to flash. After about 5
seconds, "CODE" will disappear. This
indicates the system is set.
NOTE
We recommend that your code number
be associated with something easy to
remember. You should also file a copy
of the code numbers with your
important papers.
J07S_8S15-EA-03G_Edition2.book Page 39 Thursday, August 21, 2003 10:04 AM

6-40
Interior Comfort
Au di o S ys t em
Form No. 8S15-EA-03G
Canceling code number
1. Begin with the audio unit off and the ignition switch is in the ACC position.
2. Press the auto memory button ( ) and the channel preset button 6
simultaneously for about 2 seconds
until "CODE" is displayed.
3. Again press the auto memory button ( ) and the channel preset button
6 simultaneously while "CODE" is
displayed (within 10 seconds). The
display will exhibit bars.
4. While the bars are displayed, input the current code number as described in
setting procedure Step 4. (2547, for
example). 5. While the code number is displayed,
press the auto memory button ( )
and the channel preset button 6
simultaneously for about 2 seconds and
"CODE" appears.
6. After 5 seconds, "CODE" will disappear. This indicates the code
number is canceled.
NOTE
If Err (error) appears on the display,
begin from Step 4.
J07S_8S15-EA-03G_Edition2.book Page 40 Thursday, August 21, 2003 10:04 AM

6-41
Interior Comfort
Au di o S ys t em
Form No. 8S15-EA-03G
Changing code number
To change the code number, first cancel
the number. Then set the new number by
following the setting procedures.
System activation
When the power supply is disconnected or
interrupted, the antitheft system is
activated and the unit is rendered
inoperative. In this condition, when power
is again supplied, "CODE" will be
displayed and flash unless the correct
code number is input.
To deactivate the antitheft system and
reset the audio unit, input your personal
code number.
1. Press the auto memory button ( ) and the channel preset button 6
simultaneously until bars are
displayed.
2. While the bars are displayed, input the code number as described in the setting
procedure. 3. Press the auto memory button ( )
and the channel preset button 6 for
about 2 seconds. "CODE" will be
flashed for 5 seconds, then disappear to
indicate that the system is operable. If
Err (error) appears, begin from Step 1.
•Three consecutive errors will
activate the antitheft system, and the
audio unit will be completely
inoperable and Err (error) will flash.
When this happens, the unit must be
replaced by an Authorized Mazda
Dealer at the owner
’s expense.
• Do not allow an unauthorized
person to attempt to input a code
number.
CAUTION
J07S_8S15-EA-03G_Edition2.book Page 41 Thursday, August 21, 2003 10:04 AM

6-43
Interior Comfort
Au di o S ys t em
Form No. 8S15-EA-03G
Audio sound adjustment
1. Press the audio control dial to select the function. The selected function will be
indicated.
*If your vehicle is not equipped with rear speakers, adjust the power/
volume dial so level is even.
2. Turn the audio control dial to adjust the selected functions as follows:
Indication Turn Left Turn Right
Decrease bass Increase bass
Decrease
mid-range Increase
mid-range
Decrease treble Increase
treble
Shift the sound
to the front Shift the
sound
to the rear
Shift the sound
to the left Shift the
sound
to the right
NOTE
About 5 seconds after selecting any
mode, the volume function will be
automatically selected. To reset bass,
mid-range, treble, fade, and balance,
press the audio control dial for 2
seconds. The unit will beep and "CL"
will be displayed.
J07S_8S15-EA-03G_Edition2.book Page 43 Thursday, August 21, 2003 10:04 AM