2004 JEEP GRAND CHEROKEE mirror

UNDERSTANDING THE FEATURES OF YOUR VEHICLE
CONTENTS
mMirrors...............................59
NInside Day/Night Mirror.................59
NInside Automatic Dimming Mirror Ð If
Equipped............................60
NExterior Mirrors Folding Feature...........61
NOutside Mirrors.......................61
NHeated Remote Control Mirrors Ð If
Equipped............................61
NPower Remote Control Outside Mirrors......61
NLighted Vanity Mirrors Ð If Equipped.......62mSeats.................................63
NFront Manual Seat Adjustment.............63
NFront Seat Adjustment Ð Recline...........63
NHead Restraints.......................64
NPower Seat Adjuster Ð If Equipped.........65
NMemory System Ð If Equipped............68
NHeated Seats Ð If Equipped..............71
N60/40 Split Rear Seat....................71
mTo Open And Close The Hood..............74
3

MIRRORS
Inside Day/Night Mirror
The mirror should be adjusted to center on the view
through the rear window. A two-point pivot system
allows for horizontal and vertical adjustment of the
mirror. The mirror should be adjusted while set in the
day position (toward windshield).
Annoying headlight glare from vehicles behind you can
be reduced by moving the small control under the mirror
to the night position (toward rear of vehicle).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 59
3

Inside Automatic Dimming Mirror Ð If Equipped
This mirror automatically adjusts for annoying headlight
glare from vehicles behind you. You can turn the feature
on or off by pressing the button at the base of the mirror.
A light in the button will indicate when the dimming
feature is activated.CAUTION!
To avoid damage to the mirror during cleaning,
never spray any cleaning solution directly onto the
mirror. Apply the solution onto a clean cloth and
wipe the mirror clean.
Driver's Outside Automatic Dimming Mirror Ð If
Equipped
If your vehicle is equipped with a driver's outside
automatic dimming mirror, it operates when the inside
automatic dimming mirror is on. This outside mirror
operates off the inside mirror switch and will automati-
cally adjust for annoying headlight glare when the inside
mirror does.
NOTE:The passenger outside mirror does not have this
dimming feature.
60 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Exterior Mirrors Folding Feature
All exterior mirrors are hinged and may be moved either
forward or rearward to resist damage. The hinges have
three detent positions; full forward, full rearward, and
normal.
Outside Mirrors
To receive maximum benefit, adjust the outside mirrors
to center on the adjacent lane of traffic with a slight
overlap of the view obtained on the inside mirror.
WARNING!
Vehicles and other objects seen in the right side
convex mirror will look smaller and farther away
than they really are. Relying too much on your right
side mirror could cause you to collide with another
vehicle or other objects. Use your inside mirror when
judging the size or distance of a vehicle seen in the
right side mirror.
Heated Remote Control Mirrors Ð If Equipped
These mirrors are heated to melt frost or ice. This
feature is activated whenever you turn on the rear
window defrost.
Power Remote Control Outside Mirrors
The controls for the power mirrors are located on the
driver's door trim panel above the window switches.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 61
3

Set the top switch to the left or right for the left or right
mirror, and set it to the center off position to prevent
accidentally moving a mirror when you are finished
adjusting the mirror. To adjust a mirror, select left or right
with the top switch, and press one of the four arrows for
the direction you want the mirror to move.
Lighted Vanity Mirrors Ð If Equipped
To access a lighted vanity mirror, flip down one of the
visors.
Lift the cover to reveal the mirror. The light will turn on
automatically. Sliding the button up or down will vary
the intensity of the light.
62 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Power Reclining Seat
The recliner control is on the outboard side of the seat.
Use this switch to recline the seatback and to return the
seatback to the upright position.
WARNING!
Do not ride with the seatback reclined so that the
seat belt is no longer resting against your chest. In a
collision you could slide under the seat belt and be
seriously or even fatally injured. Use the recliner
only when the vehicle is parked.
Memory System Ð If Equipped
If your vehicle is equipped with this system, your Re-
mote Keyless Entry Transmitter or Memory System But-
tons on the driver's door panel can be used to recall the
driver's seat, driver's outside rear view mirror, and radio
station presets to saved positions.
68 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

The Memory Position Buttons located on the driver's
door will always recall stored settings. The Remote
Keyless Entry Transmitters can be programmed to recall
positions when the ªUnlockº button is pressed. For
customer programmable features refer to the section on
ªOverhead Consoleº for programming details, otherwise
see your authorized dealer.
NOTE:The vehicle must be in P (Park), and the seat belt
cannot be latched if the ignition is in the ON position, to
recall memory positions.
Your vehicle was delivered to you with two remote
keyless entry transmitters. They are color coded to match
the memory buttons on the driver's door. These trans-
mitters work in conjunction with the number ª1º (black)
and number ª2º (gray) memory seat buttons on the
driver's door. Once the memory button has been set, the
corresponding remote keyless entry transmitter is also
set.NOTE:If the memory system is not set to your desired
positions, the seat and driver's mirror will default to the
factory setting each time the Keyless Entry Transmitter is
used.
To set the memory buttons follow this procedure:
1. Turn the ignition key to the ON position.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 69
3

2. Press the memory button ª1º if you are setting the
memory for driver one or number ª2º if you are setting
the memory for driver two.
3. Adjust the seat, recliner, and driver's outside rear view
mirrors to the desired position.
4. Set the radio station presets as you desire (up to 10 AM
and 10 FM station settings).
5. Press and release the SET button. An indicator light on
the set switch will flash, telling you that you are in the set
memory mode.6. Press and release button number ª1º or number ª2º on
the driver's door, depending on which transmitter you're
using. The flashing indicator light on the set switch will
go out telling you that the driver memory has been set.
If your remote keyless entry transmitter is lost, you may
order a new transmitter from your local authorized
dealer. You must designate transmitter #1 or #2. Your
authorized dealer will have to program your vehicle to
match the new transmitter.
70 UNDERSTANDING THE FEATURES OF YOUR VEHICLE