
Security and Locks
Ignition Switch . . . . . . . . . . . . . . . . . . . . . . . . . .   2 - 3
Vehicle Security  . . . . . . . . . . . . . . . . . . . . . . . . .   2 - 4
Key Transmitter  . . . . . . . . . . . . . . . . . . . . . . . . .   2 - 4
Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   2 - 7
Door Locks and Handles . . . . . . . . . . . . . . . . . . .   2 - 8
Alarms and Audible Signals. . . . . . . . . . . . . . . .   2 - 15
Security Features  . . . . . . . . . . . . . . . . . . . . . . .   2 - 17
Luggage Compartment Emergency Release . . . .   2 - 19
Garage Door Opener Transceiver . . . . . . . . . . .   2 - 20 

2 - 4 Security and Locks
Vehicle Security
When the vehicle is unoccupied or 
unattended, you are advised to do the 
following:
• Apply the electronic parkbrake and move the gear selector to the 
Park ‘P’ position.
• Do not leave children or pets in the  vehicle unattended.
• Do not leave luggage or valuables on  display.
• Remove all keys, including remote  transmitters, from the vehicle prior to 
locking the doors, even when the 
vehicle is in your garage.
• Close all windows, hood, luggage  compartment and glove 
compartment, and lock all the doors.
• Park the vehicle where it can be seen.  At night, park in a well-lit area.
• It is important to keep your keys in  safe places at all times. Leaving them 
in conspicuous places  is an invitation 
for a thief to steal them and, 
consequently, your vehicle or 
belongings. Keep them as secure as 
you would your wallet or purse, both 
at home and away.
Key Transmitter
The security system is controlled 
remotely by a radio frequency, battery-
operated, integrated transmitter key.
The transmitter is ac tivated by pressing 
one of the operating buttons.
( A ) – Unlocks and disarms the vehicle.
( B ) – Releases the luggage compartment 
lock.
( C ) – Activates the convenience headlamp 
feature and sounds the panic alarm. 
For further information on the 
convenience headlamp feature, 
see Headlight convenience  on 
page 4 - 24.
( D ) – Locks and arms the vehicle.
( E ) – Locks/unlocks the key.
To free the key, press the release 
button ( E). When not required press and 
hold the button and fold the key into the 
transmitter housing. 

Security and Locks 2 - 5
Note:
1. The key transmitter may not operate correctly in areas which are subject to 
interference from other radio 
equipment operating on the same 
frequency. Interference may emanate 
from sources such as amateur radio, 
telecommunications devices, medical 
equipment, and other remote controls 
or alarms. Where such interference is 
experienced operate the key 
transmitter as close  as possible to the 
vehicle, or use the key in the drivers 
door lock.
2. All buttons on the key transmitter will  not operate if a key is in the ignition 
switch, however, if the doors, hood or 
luggage compartment are open, only 
button ( D) will not operate.
Each integrated key will operate all the 
locks on your vehicle.
Additional integrated  key transmitters 
can be ordered from your Jaguar Retailer. 
See Additional keys  on page 2 - 7. Care of key transmitters
The key transmitters must be treated with 
care. Do not expose to extremes of heat, 
dust, humidity or fluids. Do not leave the 
transmitter exposed to direct sunlight. 
The battery is the only serviceable part.
Caution: Should a key transmitter be 
lost, a new one can be obtained and 
programmed to the vehicle by a 
Jaguar Retailer, who will ask for proof 
of vehicle ownership. It is advisable 
to notify a Retailer as soon as a key 
transmitter is lost or stolen and have 
the remaining key transmitter(s) 
reprogrammed. This will then 
prevent the lost or stolen key 
transmitter from being used to 
disarm and unlock the vehicle.
Note:
Retailers keep a log of all enquiries 
for replacement keys and notify 
Jaguar Cars Ltd. of any such requests.
Radio Frequency
The radio frequency remote system 
operates on a frequency subject to USA 
Federal Communications Commission 
(FCC) rules.
The device complies  with Part 15 of the 
FCC rules and RSS–210 of the Industry 
Canada. Operation is subject to the two following 
conditions:
1. The device may not cause harmful 
interference.
2. This device mu st accept any 
interference received, including 
interference that may cause undesired 
operation.
The key transmitter radio frequency 
approval numbers for the USA and 
Canada are as shown below:
USA – NHVWB1U241.
Canada – 3495 103 2304.
Note: The manufacturer is not 
responsible for any radio interference or 
TV interference caused by unauthorised 
modifications to this equipment. Changes 
or modifications not expressly approved 
by the party responsible for compliance 
could void the user’s authority to operate 
the equipment.
Caution: The key-ring transmitter 
may suffer interference from other 
legal users of this  radio frequency 
band, such as radio amateurs, 
medical equipment, remote controls 
or alarm systems. To lock or unlock 
the vehicle either use a key or 
operate the transmitter as close to the 
security antenna as possible. 

2 - 6 Security and Locks
Key transmitter battery renewal
When the battery needs renewal there will be a significant 
decrease in the effective range of the key transmitter. To renew 
the battery, follow the procedure below:
• Insert a small, flat-blade, screwdriver at an angle of about  45 degrees, into the slot on th e back of the key transmitter 
as shown ( A). Apply light pressure to the screwdriver and 
lever the screwdriver forward to separate the two halves of 
the key transmitter. Finally, pu ll the transmitter from the key 
body.
• Insert the screwdriver into th e slot between the transmitter 
covers adjacent to the key stowage area as shown ( B). 
Apply light pressure to the screwdriver and lever the 
screwdriver downward to separate the covers.
• Unscrew and remove the small screw ( C) and remove the 
printed circuit board, taking  care not to touch the battery 
terminals. Remove the battery and dispose of it safely.
• Fit a new battery cell, type CR2032 (available from your 
Jaguar Retailer), with the si de marked with the positive 
symbol (+) downwards in  the battery receptacle. 
Avoid touching the new battery  as moisture/oil from the 
fingers can reduce the life of  the battery and corrode the 
contacts.
• Replace the printed circuit board making sure to engage the  board under the securing tabs (D ), and secure with the 
screw.
• Refit the cover and click into place with thumb pressure.
• Slide the transmitter back onto  the key body until it clicks 
into place. 

Security and Locks 2 - 7
Keys
Vehicles are supplied with two integrated 
transmitter keys and one green-headed 
valet key. Additionally, black-headed keys 
are available and for further details, 
contact a Jaguar Retailer.
Integrated transmitter key
The integrated tr ansmitter key is 
comprised of the key body, which is 
integrated with a re mote transmitter. 
The key operates all the locks on your 
vehicle.
Green-headed valet key
The green-headed valet key is not 
integrated with a re mote transmitter. 
The key operates the driver’s door lock 
and the ignition switch, but does not 
operate the luggage compartment lock.
Black-headed key
The black-headed key is not integrated 
with a remote transm itter, but it does 
operate all the locks and the ignition 
switch on your vehicle. The key is not 
supplied with your vehicle.
Additional keys
Five additional keys  can be programmed 
to operate the locks on your vehicle. Note:
A maximum of three additional 
integrated transmitter keys can be used.
All additional keys mu st be obtained from 
and programmed by, a Jaguar Retailer.
Key number label
The key number is recorded on an 
adhesive label which is affixed to the rear 
of the integrated transmitter keys. 
Peel off the label and keep safely, not in 
the vehicle.
Immobilisation System
This vehicle is  fitted with an 
immobilisation system. The system 
prevents the vehicle be ing driven away by 
unauthorised persons. The features of the 
system include the following:
Programmable key
An electronic device is fitted in the head 
of each key which is programmed to the 
vehicle electronic systems.
When a programmed key is inserted into 
the ignition switch it is recognised and 
accepted by the vehicle’s electronic 
systems.
The engine cannot be started with a key 
that is not programmed to the vehicle 
electronic systems. Immobilisation system status light
The immobilisation system status is 
shown by a Light Emitting Diode (LED), 
which is located on the top surface of the 
fascia panel (
A).
If an ignition key is  put into the ignition 
switch and turned to position ‘II’, and the 
LED remains flashing af ter three seconds, 
it is possible that the engine will not start.
Should this occur, please contact a Jaguar 
Retailer, who will inve stigate the cause of 
the flashing LED. 

2 - 8 Security and Locks
Door Locks and Handles
All doors can be centrally locked and 
unlocked remotely, using the key 
transmitter buttons.
Only the driver’s door is equipped with 
an external key lock, which activates the 
central locking and the two-stage 
unlocking.
Vehicle Locking and 
Unlocking
Lock the vehicle and set the alarm
• Ensure windows and sunroof (if fitted) are fully closed. • Press the lock button on the key 
transmitter, or;
• Put the key in the driver’s door lock,  turn the key toward s the rear of the 
vehicle and release.
The direction indicators will flash once, 
a chirp will be heard (if enabled) and the 
security light (located on the top surface 
of the fascia) will start flashing. 
After 20 seconds, the alarm will be set.
If a door, the hood or the luggage 
compartment are open and an attempt is 
made to lock the vehicle, the direction 
indicators will flash five times (if enabled) 
and/or an audible  warning will sound 
twice as a warning that the vehicle is not 
secure.
Note: The security system will not arm if 
a key is in the ignition switch. If a key is 
used in the drivers door lock and turned 
towards the front of the vehicle then 
released when an aperture is ajar, 
the security will arm (2 error tones 
(if enabled), or five flashes of the direction 
indicators (if enabled) will be emitted). The security system will arm, but will not 
monitor the aperture th
at is ajar until it 
has been fully closed.
Drive-away door locking
With the ignition key at position ‘II’ and 
all the doors closed,  all doors will lock 
when the gear selector is moved from 
position ‘P’ or ‘N’. The gear selector has 
to be moved from ‘P’ or ‘N’, and into a 
different gear, for longer than one 
second.
If the vehicle is stopped and a door is 
opened and subsequently closed, 
the doors will lock again when the gear 
selector is moved from position ‘P’ or ‘N’, 
and into a different gear.
If the vehicle is stopped and a door is 
opened and subsequently closed, but the 
gear selector is not moved from 
position ‘P’ or ‘N’, or the current gear 
position the doors will remain unlocked.
All vehicles have the drive-away door 
locking feature installed during 
manufacture. This feature can be 
disabled, or reinstated, by a Jaguar 
Retailer, if required. 

Security and Locks 2 - 9
Central locking switch
With the ignition switch in either 
position ‘I’ or ‘II’ and all the doors closed 
and unlocked, one press of the switch 
will lock all of the doors and inhibit the 
luggage compartment.
With the ignition switch in either 
position ‘I’ or ‘II’ and all the doors closed 
and locked, one press of the switch will 
unlock all of the doors and allow access 
to the luggage compartment.
If the vehicle is unlocked, press and hold 
the switch for more than two seconds to 
centrally lock the vehicle and close all the 
windows and sunroof (if fitted). Releasing 
the switch will halt the operation of the 
windows and sunroof (if fitted). If the vehicle is locked, press and hold the 
switch for more than two seconds to 
unlock the vehicle and open all the 
windows and sunroof (i
f fitted). Releasing 
the switch will halt the operation of the 
windows and sunroof (if fitted).
Note: All windows must be ‘taught’ to 
the vehicle for this function to operate. 
See Window Operation  on page 4 - 29.
If the central locking switch is pressed 
when the ignition switch is not in 
position ‘I’ or ‘II’ the security systems 
inclination and intrusion sensors (if fitted) 
will not operate for one arming period. 
The security LED in the fascia will flash 
for 5 seconds to indicate that this has 
occurred.
!WARNING:
1. Make sure that all occupants are  kept clear of the windows and 
sunroof aperture (if fitted).
2. When an interior door release  lever is pulled, the door will 
unlatch.
After using the central locking switch, 
it may be necessary to press the switch 
again or pull a front  door interior release 
lever to unlock the vehicle. Smart locking
This feature helps prevent locking the key 
in the vehicle.
If a door is open or ajar and an attempt is 
made to lock the doors using a front door 
interior locking le
ver, all doors will 
centrally lock and then centrally unlock.
If a door is open or ajar and an attempt is 
made to lock the doors using a rear door 
interior locking lever,  only the door on 
which the lever is operated will lock, 
the remaining doors will remain 
unlocked.
If a door, hood or luggage compartment is 
open, the vehicle can only be locked from 
the outside by using a key in the driver’s 
door lock.
Note: An audible and/or visual error 
warning will be given.
It will not be possible to lock the vehicle 
with a key transmitter if a door, luggage 
compartment or hood  is open, or a key is 
left in the ignition. 

2 - 10 Security and Locks
Global closing
!WARNING:
Make sure that all occupants are kept 
clear of the windows and sunroof 
aperture (if fitted).
Key in the driver’s door:  Turn and hold 
the key towards the rear of the vehicle, 
for more than 2 seconds duration, 
to close all the electrically operated 
windows and sunroof (if fitted). If the key 
is released, the global  closing action stops 
immediately.
Global opening
Key in the drivers door:  Turn and hold 
the key towards the front of the vehicle 
for more than 2 seconds duration, 
to open all the electrically operated 
windows and sunroof (if fitted).
If the key is released, the global opening 
action stops immediately.
Key transmitter:  Press and hold the 
unlock button for longer than 2 seconds 
to open all the electrically operated 
windows and sunroof (if fitted – one shot 
operation). Pressing any button again 
while global opening is taking place will 
stop all movement. Unlock the vehicle and disarm the 
alarm using a key transmitter
• Press the unlock button on the key 
transmitter.
Single-stage unlocking
This unlocks all doors and the luggage 
compartment and turns the interior lights 
on. The security LED stops flashing. 
The direction indicators will flash twice 
and two audible tones will be given 
(if enabled) to indicate that the system is 
disarmed.
Two-stage unlocking
This unlocks the driver’s door, 
the luggage compartm ent and turns on 
the interior lights. T his will also disarm 
the system if it was armed, the direction 
indicators will flash twice and two 
audible tones will sound (if enabled), and 
the security LED stops flashing. A second 
press is required to unlock all doors 
(Retailer programmable or key fob 
selectable). Selecting single-stage or two-stage 
unlocking
The procedure for changing from single-
stage to two-stage unlocking (if enabled), 
or vice versa, is as follows:
• Press and hold the lock and unlock 
buttons on the  key transmitter 
simultaneously for four seconds.
Note:
1. The direction indi cators will flash 
twice and two chirps  will be heard 
(if enabled) to confirm the unlocking 
action.
2. To revert to the previous condition,  repeat the procedure described above.
3. For operation of the two-stage  unlocking feature when the vehicle is 
equipped with a touch-screen, please 
refer to the Touch-screen Handbook.