FEATURES OF YOUR HYUNDAI
1- 10 The rear seatbacks may be folded to facilitate carrying long items or to increase the luggagecapacity of the vehicle.
o To unlock the seatback, push the seatback
locking button, then pull forward on the seatback panel.
o When you return the seatback to its upright position, always be sure it has locked intoposition by pulling and pushing on the top ofthe seatback.
B110A02S-AAT FOLDING REAR SEATBACKS
HGK108
By pulling up the walk in device lever (1) at the right-upper side of the passenger side seatback,the seatback will tilt forward. Then push the seatforward to allow the occupants to enter. Recliner Memory By pulling up the walk in device lever (1), the seatback is reclined and returned to the originalposition. WARNING: Don't drive with the passenger side seatbackreclined. It is dangerous to move it whiledriving. Be sure the seatback is caterredfirmly before driving.B130A01GK-AAT REAR SEAT ENTRY (Walk in device)The driver and front passenger's seatbacks should be tilted to enter the rear seat.
HGK053
(2) (1)
By pulling up the walk in device lever (1) at the left-
upper side of the driver side seatback, the seatback
will tilt forward. Then pull the lock release lever (2)
up to move the seat forward.
HGK240
(1)
B099A01F-AAT BEFORE FOLDING THE REAR SEATS
B099A01GK
In order to prevent the shoulder belt from being damaged while folding the rear seat, the shoulderbelt must be passed through the hanger to keepit out of the way. CAUTION: Seat belts must be removed from the hangerwhen in use.
1CONTROLS AND EQUIPMENT
16
By pulling up the walk in device lever (1) at the left-up side of the passengerside seatback, the seatback will tilt forward. And then push the seat for- ward to enter the occupants. Recliner Memory By pulling up the walk in device lever (1) seatback is reclined and return to the memorized original position. (1)
B129A01F-AAT REAR SEAT POSITIONS
!WARNING:
This vehicle contains two rear seat- ing positions only and a seat belt for each seating position. Thus, never permit more than two occu-pants to ride in the rear seat be- cause an unrestrained occupant could be seriously injured or killedin the event of a vehicle crash. B130A01GK-DAT REAR SEAT ENTRY (Walk in device) The driver and front passenger's seatback should be tilted to enter therear seat. By pulling up the walk in device lever (1) at the right-up side of the driver side seatback, the seatback will tilt forward.And then pull the lock release lever (2) up with moving the seat forward.
B129A01GK
HGK2036-E
(1)
(2) HGK2036-D
