Ó
Ó ÓÓ
µ
µ´
µ ´µWith the ignition in the
ACCESSORY (I) or ON (II) position,
insert a CD into the CD slot. The
drive will pull the CD in the rest of
the way and begin to play it. You
operate the CD player with the same
controls used f or the radio. The
number of the track playing is shown
in the display. The system will
continuously play a CD until you
change modes.
Press the LOAD button until you
hear a beep and see ‘‘LOAd’’ in the
display.
The disc number f or an empty
position is highlighted and the red
light starts blinking.
Insert the disc into the CD slot
when the green CD load indicator comes on. Insert it only about
half way, the drive will pull it in the
rest of the way. You will see
‘‘BUSY’’ in the display. The CD
load indicator turns red and blinks
as the CD is loaded.
Repeat steps 1 through 3 until all
six positions are loaded. If you are
not loading all six positions, the
system begins playing the last CD
loaded.
You can also load a CD into an empty
position while a CD is playing. Select
the empty position (the disc number
indicator is not highlighted) and
press the appropriate preset bar or
touch a disc icon. The current CD
stops playing and starts the loading
sequence. The CD just loaded will
play. Each time you press and release ,
the player skips forward to the
beginning of the next track. Press
and release to skip backward to
the beginning of the current track.
To move rapidly within a track, press
and hold the or . You will see
CUE or REW in the display.
To continuously replay
a track, press and release the RPT
button. You will see RPT in the
display. Press the RPT button again
to turn it off.
This f eature plays the
tracks in random order. To activate
Random Play, press and release the
RDM button. You will see RDM in
the display. This continues until you
press the RDM button again.
1. 4.
3. 2.
OnEXmodelinU.S.,andEXandEX-L models in Canada
Comf ort and Convenience Feat ures
CD Player To Change Tracks (SK IP)
REPEAT
RANDOM
L oading t he In-Dash CD Changer
Playing a CD
109
