2004 FORD EXPEDITION lock

[x] Cancel search: lock

Page 201 of 344

FORD EXPEDITION 2004 2.G Owners Manual BRAKES
Your service brakes are self-adjusting. Refer to the scheduled
maintenance guide for scheduled maintenance.
Occasional brake noise is normal and often does not indicate a
performance concern wi

Page 202 of 344

FORD EXPEDITION 2004 2.G Owners Manual •The anti-lock system does not always reduce stopping distance.
Always leave enough room between your vehicle and the vehicle in
front of you to stop.
•We recommend that you familiarize yourself w

Page 205 of 344

FORD EXPEDITION 2004 2.G Owners Manual If a load is added to, or removed from the vehicle, the load leveling
feature of the air suspension system will adjust the suspension to keep
the vehicle at a constant level.
When exiting the vehicle,

Page 206 of 344

FORD EXPEDITION 2004 2.G Owners Manual To remove the second panel, press
the tab down to unlock the access
panel.
Press the bottom portion of the
switch to turn off the air
suspension.
2004 Expedition(exd)
Owners Guide (post-2002-fmt)
USA

Page 208 of 344

FORD EXPEDITION 2004 2.G Owners Manual Use extra caution while becoming familiar with your vehicle. Know the
capabilities and limitations of both you as a driver and your vehicle.
ADVANCETRACSTABILITY ENHANCEMENT SYSTEM
(IF EQUIPPED)
The

Page 210 of 344

FORD EXPEDITION 2004 2.G Owners Manual •A slight deceleration of the vehicle
•The AdvanceTracindicator light will flash
•If your foot is on the brake pedal, you will feel a vibration in the
pedal.
•If the driving condition is seve

Page 211 of 344

FORD EXPEDITION 2004 2.G Owners Manual 3. Locate the round access plug on
the underside of the steering
column cover.
4. Remove the access plug using a flat-head screwdriver, then insert your
finger and pull the override button toward you.

Page 212 of 344

FORD EXPEDITION 2004 2.G Owners Manual be slightly delayed. Once the engine coolant temperature reaches 71°C
(160°F) the normal shift strategy will resume. This is normal operation
and will not affect the function or the durability of th