19
FRANÇAIS DEUTSCH ESPAÑOL PORTUGUÊS ITALIANOENGLISH
F0C0444m
VARIANTS AS COMPARED WITH THE OWNER HANDBOOK
This supplement contains the description of the Fiat Stilo Multi Wagon
VAN fitting out. This version is available in the 2 and 4 seats fitting out,
both versions have a partition between the passenger compartment and
the load compartment (see figures). For what concerns the parts not
contained in this supplement, please refer to The Owner Handbook to
which this supplement is an annex.
INSIDE EQUIPMENT 2 seat version (main differences as
compared with the Stilo Multi Wagon versions)
❒No rear seat and boot cover (rear parcel shelf).
❒No rear seat belts.
❒Fixed partition separating the load area from the passenger made of a
grid at the top and of sheet at the bottom.
❒Loading plan extended till the partition
❒Fixed and vision-proof glass side windows (load compartment).
❒Spare wheel having the same sizes as the wheels in the outfit.
❒Fuel tank plug provided with a lock.
4 seat version (main differences as compared with the Stilo
Multi Wagon versions)
❒Rear seat for two places only, with three point safety belts with reel.
❒Fixed tubular partition separating the load area from the passenger
compartment.
❒Spare wheel having the same sizes as the wheels in the outfit.
Driving with a raised open hatch back door is discouraged because exhaust gases
could be aspirated into the load compartment.
WARNING
F0C0445m
2 seat version
4 seat version
FRANÇAISDEUTSCHESPAÑOLPORTUGUÊSITALIANO20ENGLISH
SAFETY BELTS
On the 4 seat version, two three point safety belts with reel are provided
on the rear places.
LOADING SUGGESTIONS
Fiat Stilo Multi Wagon VAN was designed and approved in compliance
for certain maximum weights:
❒running order weight/total weight/towable weight;
❒useful carrying capacity;
❒maximum weight on front/rear axle.
Each of these limits must be well kept in mind, and they must in no way
be exceeded.
Other simple cares can improve driving safety. running comfort and
vehicle life time:
❒uniformly distribute the load on the platform. Should it become
necessary to concentrate the load in one area only, choose the
intermediate part between the two axles;
❒remember that the lower the load position, the lower becomes the
centre of gravity, and this facilitates safe driving: hence always position
at the bottom the heavier goods;
❒remember that the vehicle dynamic behaviour is influenced by the
transported weight: in particular braking spaces become longer,
specially at a high speed.
IMPORTANT In the case of a sudden braking, or occasional impacts, an
unexpected load movement could create hazardous situations for the
driver and the passenger: therefore before starting the journey, solidly
bind the load, using the special 6 hooks (see figure); for blocking use
cables, ropes or belts that are properly strong to suit the material to be
fixed.
F0C0441m
