CONNECT Nav+
159
Color: selecting it rotating the en-
coder 14-fig. 1and pressing “ENTER”
to confirm 15-fig. 1the following set-
tings are possible:
– “Automatic”: enables to adjust au-
tomatically the colour palette
(day/night) depending on car lights
switching on/off.
– “Day”: activates day mode. The ad-
justment cursor is available if “Color”
is set to Day or Automatic with lights
off.
– “Night”: activates night mode. The
adjustment cursor is available if “Col-
or” is set to Night or Automatic with
lights on.OK
To activate and to store settings, se-
lect “OK” by rotating the encoder14-
fig. 1and then press “ENTER” 15-
fig. 1.
POWER OFF
Select “Power OFF” rotating the en-
coder 14-fig. 1and pressing “ENTER”
to confirm 15-fig. 1to access the type
of setting that determines CONNECT
Nav+ switching off fig. 176.Possible settings are:
– “Deactivation dependent on igni-
tion key”
– “Deactivation independent of igni-
tion key”.
Current activated setting will be high-
lighted.
Select the required setting by rotat-
ing the encoder 14-fig. 1and press-
ing “ENTER” to confirm 15-fig. 1.
Press “ESCAPE” 13-fig. 1to go back
to previous screen.
fig. 175
F0C4138g
fig. 176
F0C4139g
