2004 FIAT CROMA length

5
Care and maintenance
The radio structure ensures long operation with no
need for particular maintenance.In the event of a fault,
contact a Fiat Dealership.
To clean the front panel only use a soft, antistatic
cloth. Cleaning and polishing products might spoil the
surface.
Compact Disc
Remember that dirt,marks or distortion on Compact
Disc can cause skipping. To obtain optimum playing
conditions we give the following advice:
❒only use Compact Discs which have the following
brand:
❒carefully clean all Compact Discs of fingerprints and
dust using a soft cloth. Support Compact Discs from
the outer circumference and clean from the centre
outwards;❒never use chemical products for cleaning (e.g.: spray
cans,antistatic or thinners) as they might damage
the surface of Compact Discs;
❒after use, put Compact Discs back in their
container, to avoid marks or scratches that may
cause skipping when playing;
❒do not expose Compact Discs to direct sunlight,
high temperatures or damp for prolonged lengths of
time to prevent them from bending;
❒do not stick labels or write on the recorded surface
of Compact Discs with pens or pencils.
To remove a Compact Disc from its container, press
the centre and raise the disc carefully, holding it by the
outer circumference.
Always hold Compact Discs by the outer
circumference. Never touch the surface.
To remove fingerprints and dust, use a soft cloth
starting from the centre of the Compact Disc
outwards.

41
RADIO WITH COMPACT DISC
AND MP3 CD PLAYER
RADIO WITH
COMPACT DISC PLAYER
SENSITIVITY function
(tuner sensitivity adjustment)
With this function it is possible to change the
sensitivity of automatic station searching. When low
sensitivity “SENSITIVITY:LOCAL” is set only stations
with excellent reception are sought; when high
sensitivity “SENSITIVITY: DISTANCE” is set all
stations are sought. Therefore, if the car is in an area
with a considerable number of stations and you want
to choose only those with a strong signal, set to low
sensitivity “SENSITIVITY: LOCAL”.
To set the sensitivity, use button 7 (
÷) or 5 (˜).
The display will show the current status of the
function:
❒“SENSITIVITY: LOCAL” (low sensitivity);
❒“SENSITIVITY: DISTANCE” (high sensitivity).
SVC SETTING function
(volume changing with speed)
The SVC function makes it possible to automatically
adapt the volume level to the speed of the car,
increasing it as the speed increases to maintain the
ratio with the noise level in the passenger
compartment.
To turn the function on/off use button
7 (
÷) or 5 (˜). The display will show the current
status of the function:
❒“SVC SETTING: ON” (function on);
❒“SVC SETTING: OFF” (function off).CD NAMING function
(allocating a name to a CD)
Use the CD NAMING function to give a name (max.
name length = 8 characters) to max. 30 CDs.
This function can be selected only if in Compact Disc
or CD Changer mode. To turn this function on, use
button 7 (
÷) or 5 (˜): the display shows “CD
NAMING FUNCTION”. If the CD already has a name,
this will be shown on the display, if not, eight dashes
will be shown. If storage is no longer available for a
new name, the display will show the first name stored.
To change the name or give a name to the new CD
press button 7 (
÷) or 5 (˜). Press the buttons
again to choose the position of the character to be
changed. Press buttons 3 (
N) or 6 (O) to choose or
change the character.
To store the name, press button 12 (MENU-PRESET
SCAN) again. The display will show “CD NAME”.
To clear a name, turn the function on and press
button 16 (2-CLR) for about 5 seconds. The system
beeps and the display shows “ONE NAME DELETED”
for about 2 seconds. At this point the procedure can
be started to give a new name.
To clear all the names, turn the function on and keep
button 16 (2-CLR) pressed for over 8 seconds. The
set gives two beeps and the display shows “ALL
NAMES DELETED” for about 2 seconds. At this point
it is possible to start the name allocation procedure.

71
RADIO WITH COMPACT DISC
AND MP3 CD PLAYERRADIO WITH
COMPACT DISC PLAYER
SVC SETTING function
(volume changing with speed)
The SVC function makes it possible to automatically
adapt the volume level to the speed of the car,
increasing it as the speed increases to maintain the
ratio with the noise level in the passenger
compartment.
To turn the function on/off use button 7 (
÷) or 5
(
˜). The display will show the current status of the
function:
❒“SVC SETTING: ON” (function on);
❒“SVC SETTING: OFF” (function off).
CD NAMING function
(allocating a name to a CD)
Use the CD NAME function to give a name (max.
name length = 8 characters) to max. 30 CDs.
This function can be selected only if in Compact Disc
or CD Changer mode. To turn this function on, use
button 7 (
÷) or 5 (˜): the display shows “CD
NAMING FUNCTION”. If the CD already has a name,
this will be shown on the display, if not, eight dashes
will be shown. If storage is no longer available for a
new name, the display will show the first name stored.To change the name or give a name to the new CD
press button 7 (
÷) or 5 (˜). Press the buttons
again to choose the position of the character to be
changed. Press buttons 3 (
N) or 6 (O) to choose or
change the character.
To store the name, press button 12 (MENU-PRESET
SCAN) again. The display will show “CD NAME”.
To clear a name, turn the function on and press
button 16 (2-CLR) for about 5 seconds. The system
beeps and the display shows “ONE NAME DELETED”
for about 2 seconds. At this point the procedure can
be started to give a new name.
To clear all the names, turn the function on and keep
button 16 (2-CLR) pressed for over 8 seconds. The
set gives two beeps and the display shows “ALL
NAMES DELETED” for about 2 seconds. At this point
it is possible to start the name allocation procedure.