2004 DODGE RAM 2500 DIESEL warning

[x] Cancel search: warning

Page 91 of 426

DODGE RAM 2500 DIESEL 2004 3.G Owners Manual Help
If you need assistance at any prompt or if you want to
know what your options are at any prompt, say9Help9.
The UConnectŸ system will play all the options at any
prompt if you ask for help.
Canc

Page 92 of 426

DODGE RAM 2500 DIESEL 2004 3.G Owners Manual 40-20-40 Front Seat
As the name implies, the seat is divided into 3 segments.
The outboard seat portions are each 40% of the total
width of the seat. The back of the center portion (20%)
easily folds

Page 93 of 426

DODGE RAM 2500 DIESEL 2004 3.G Owners Manual Reclining Seats
The recliner handle is on the outside of the seat cushion.
Pull up on the handle to release the seat back and adjust
for comfort.WARNING!
You can be seriously, even fatally injured rid

Page 98 of 426

DODGE RAM 2500 DIESEL 2004 3.G Owners Manual To prevent possible damage, do not slam the hood to
close it. Use a firm downward push at the front center of
the hood to ensure that both latches engage.WARNING!
If the hood is not fully latched, it

Page 106 of 426

DODGE RAM 2500 DIESEL 2004 3.G Owners Manual The delay interval decreases as you rotate the knob until
it enters the LO continual speed position. The delay can
be regulated from a maximum of about 15 seconds
between cycles, to a cycle every 2 se

Page 107 of 426

DODGE RAM 2500 DIESEL 2004 3.G Owners Manual TILT STEERING COLUMN
To tilt the column, push down on the lever below the turn
signal control and move the wheel up or down, as
desired. Push the lever back up to lock the column firmly
in place.WARNI

Page 110 of 426

DODGE RAM 2500 DIESEL 2004 3.G Owners Manual To Set At A Desired Speed
When the vehicle has reached the desired speed, press
and release the SET button. Release the accelerator and
the vehicle will operate at the selected speed.
To Deactivate
A

Page 112 of 426

DODGE RAM 2500 DIESEL 2004 3.G Owners Manual Vehicles equipped with a 4±speed automatic transmis-
sion may exhibit several 4-3 downshifts under the above
conditions. To reduce the frequency of the downshifts
and to improve vehicle performance,