2004 Citroen C3 PLURIEL Rod

Downloaded from www.Manualslib.com manuals search engine PRIVATE CARS
C2C3C3 PLURIELXSARA
XSARA PICASSOBERLINGO
PRIVATE CARS
CAR 050014
Volume 12004
AC/QCA
V/MTD
Méthodes techniques documentation «The intellectual property rights relating to the technical information contained in this document
belong exclusively to the manufacturer. Reproduction, translation or distribution in whole or in part
without prior written authorisation from the manufacturer is forbidden».«The technical information contained in this document is intended for the exclusive use of the trained
personnel of the motor vehicle repair trade. In some instances, this information could concern the security andsafety of the vehicle. The information is to be used by the professional vehicle repairers for whom it is
intended and they alone would assume full responsibility to the exclusion of that of the manufacturer».
«The technical information appearing in this brochure is subject to updating as the characteristics ofeach model in the range evolve. Motor vehicle repairers are invited to contact the CITROËN network
periodically for further information and to obtain any possible updates».
2004

Downloaded from www.Manualslib.com manuals search engine 67
ENGINE
SPECIAL FEATURES TIGHTENING TORQUES (m.daN )
A = KFV
B = NFU
RH engine support
(1) : 6 ± 0,4
(2) : 6 ± 0,6
(3) : 4,5 ± 0,4
Torque reaction rod
(4):6 ±0,6
(5):6 ± 0,6
(6):8,5 ±0,2
(7):6 ±0,6
LH engine support on gearbox
(8) : 3 ± 0,3
(9) : 6 ± 0,6
(10) : 5,5 ± 0,5
B1BP2Y3P
C2
Engines: HFX KFV NFU

Downloaded from www.Manualslib.com manuals search engine 72
ENGINESPECIAL FEATURES TIGHTENING TORQUES (m.daN )
Engine8HX
Crankshaft
Bearing cap fixing screws
Pretightening
1 ± 0,2
Slackening180°
Tightening3 ± 0,3
Angular tightening140°
Con rod screws
Tightening
1 ± 0,1
Angular tightening100° ± 5°
3 ± 0,3
Angular tightening180° ± 5°
Cylinder block
Sump1,3 ±0,1
Timing belt guide roller2,3 ± 0,2
Timing belt tensioner roller3,7 ± 0,3
C2

Downloaded from www.Manualslib.com manuals search engine 75
ENGINE
SPECIAL FEATURES TIGHTENING TORQUES (m.daN )
Engines: HFX KFV NFU
C3 Pluriel
A = KFV
B = NFU
RH engine support
(1) : 6 ± 0,4
(2) : 6 ± 0,6
(3) : 4,5 ± 0,4
Torque reaction rod
(4) : 6 ± 0,6
(5) : 6 ± 0,6
LH engine support on gearbox
(6):3 ±0,3
(7) : 6 ± 0,6
(8) : 5,5 ± 0,5
B1BP2NEP
C3 C3 PLURIEL
C3
A = HFX KFV
B = NFU
RH engine support
(1) : 4,5 ± 0,4(2):6,1 ±0,6
(3) : 4,5 ± 0,4
Torque reaction rod
(4) : 6 ± 0,6(5):6 ±0,6
LH engine support on gearbox
(6): 3 ± 0,3
(7) : 6 ± 0,6(8):5,5 ± 0,5

Downloaded from www.Manualslib.com manuals search engine 78
ENGINETIGHTENING TORQUES: POWER UNIT SUSPENSION
Engine: KFU
RH engine support
(1): 6 ± 0,6
(2) : 6 ± 0,6
Torque reaction rod
(3) : 6 ± 0,6
(4) : 6 ± 0,6
LH engine support on gearbox
(5) : 3 ± 0,3
(6):6 ± 0,6
(7):5,5 ± 0,5
B1BP2ZBP
C3

Downloaded from www.Manualslib.com manuals search engine 81
ENGINE
SPECIAL FEATURES TIGHTENING TORQUES (m.daN )
Engines: 8HX 8HW
RH engine support
(1) : 4,5 ± 0,4
(2) : 3 ± 0,3
Torque reaction rod(3):6 ± 0,6
(4) : 6 ± 0,6
LH engine support on gearbox
(5) : 5,4 ± 0,5
(6) : 6 ± 0,6
(7) : 5,5 ± 0,5
B1BP2LJP
C3

Downloaded from www.Manualslib.com manuals search engine 82
ENGINESPECIAL FEATURES TIGHTENING TORQUES (m.daN )
Engine: 8HZ
RH engine support
(1) : 2 ± 0,2
(9) : 2,5 ± 0,2
(10) : 4,5 ± 0,5
(11) : 4,5 ± 0,5(12): 6 ± 0,6
RH lower engine support
(8):5,7 ±0,9
Torque reaction rod.
(2) : 4,5 ± 0,5
(3) : 4,5 ± 0,5
(4) : 4,5 ± 0,5
LH engine support
(5) : 6,5 ± 0,6
LH lower engine support
(6):2,2 ± 0,2
(7) : 2 ± 0,2
B1BP2WLP
XSARA

Downloaded from www.Manualslib.com manuals search engine 83
ENGINE
83
SPECIAL FEATURES TIGHTENING TORQUES (m.daN )
Engines 8HX 8HW 8HZ
Crankshaft
Bearing cap fixing screw
Pretightening1
SlackeningYES
Tightening3
Angular tightening140°
Con rod nuts
Pretightening1
SlackeningYES
Tightening1,5 ± 0,1
Angular tightening100°±5°
Accessories drive pulley
Pretightening3 ±0,4
Angular tightening180°±5°
Cylinder block
Sump1 ± 0,1
Timing belt guide roller 4,5 ± 0,4 3,7 ± 0,4Timing belt tensioner roller3 ± 0,3 2,3 ± 0,3
C3 C3 PLURIEL XSARA