3. Put on the wheel nuts.
4. Finger-tighten the nuts.
5. Oil the surfaces between the nuts and washers. Do
not oil the studs or the threads of the nut.
6. Tighten the nuts to 400 lb-ft (542 N-m) if an 8-hole
stud or 480 lb-ft (650 N-m) if a 10-hole stud, using
the following diagrams.
{CAUTION:
Never use oil or grease on studs or the
threads of the wheel nuts. If you do, the wheel
nuts might come loose and the wheel could
fall off, causing a crash. 8-Hole
10–Hole (Front of Inner
Dual Wheel)10–Hole (Outer Dual
Wheel)
5-72
