Your vehicle’s instrument panel is
equipped with this cluster or one very
similar to it. The instrument panel
cluster includes these key features:
1. Tachometer
2. Turn Signal lndicator Light
3. Antilock Brake System Warning
Light
4. High Beam lndicator Light
5. Speedometer
6. Safety Belt Reminder Light
7. Air Bag Readiness Light
8. Turn Signal lndicator Light 9. Fuel Gauge
10. Service Vehicle Soon Light
11.Service Engine Soon Light
12. Engine Coolant Temperature
Gauge
13. Brake System Warning Light
14. Battery Warning Light
15. PRND321 lndicator
16. Cruise Control lndicator Light
17. Oil Pressure Light
18. Security Light
19. Trip Odometer 20. Trip Odometer
21. Traction Control System Off
Warning Light
IMPORTANT:The instrument panel
cluster is designed to let you know
about many important aspects of your
vehicle’s operation. It is important to
read your Owner Manual and become
familiar with the information being
relayed to you by the lights, gauges
and indicators, and what action can
be taken to ensure safety and to
prevent damage.
3
See Section 3 of your Owner Manual.
1
2
4
5
9
101112
13
14
16
17
15
18
20
21
19
3
6
8
7
Instrument Panel Cluster
15778 LeSABRE GUIDE 5/22/03 1:54 PM Page 3
11
and adjusts the wipers accordingly. The
wipers will wipe once to indicate that this
feature is on.
Activate the Moisture-Sensing System
Turn the WIPER band to one of the five
sensitivity levels within the DELAY area.
The wipers will make one wipe to indi-
cate it is on. The DELAY position clos-
est to OFF/MIST is the lowest sensitivity
setting and allows more rain to accumu-
late before the wipers actuate. Rotating
the WIPER band away from you will
increase the sensitivity and frequency of
wipes.
See Section 3 of your Owner Manual.
Cruise Control
Set Cruise Control
The cruise control buttons are located
on the steering wheel. Press the
ON/OFF button to turn cruise control on.
Accelerate to the speed you want
to set.
Press the SET/COAST button. The
cruise control light on the instrument
cluster will illuminate. Remove your foot
from the accelerator pedal.
Notice:Turn the wiper band to OFF
to avoid wiper damage when going
through an automatic car wash.
Resume Set Speed
Applying the brakes will turn the cruise
control off.
Press the RESUME/ACCEL button. The
vehicle’s preset speed will resume.
OFF
Press ON/OFF or step on the brake
pedal.
See Section 3 of your Owner Manual.
Headlamps — High Beam
High/Low Beam Changer
Pull the turn signal lever toward you until
it clicks to change from low beam to
high beam.
Flash-To-Pass
Pull and hold the turn signal lever toward
you briefly to flash the headlamps.
See Section 3 of your Owner Manual.
15778 LeSABRE GUIDE 5/22/03 1:55 PM Page 11
