3
51
3
Starting – Riding – Parking
Important notes
Catalytic converter
e Attention:
To avoid damage to the cata-
lytic converter:
Do not run the fuel tank dry
Push-start only when the
engine is cold
Do not run the engine with a
spark plug lead disconnected
Do not exceed the engine- speed limits marked on the
revolution counter
Comply with all specified
maintenance intervals
Stop the engine at once if it
misfires
In the event of misfiring or a severe drop in engine power,
consult a specialist work-
shop, preferably an author-
ised BMW motorcycle dealer
If misfiring or malfunction of the
fuel-air mixture preparation sys-
tem causes unburned fuel to
reach the catalytic converter,
there is a risk of it overheating
and being damaged.
Risk of fireHigh temperatures occur at the
exhaust system, particularly if a
catalytic converter is installed.
d Warning:
Make sure that whether riding
or standing still or when the
motorcycle is parked, no eas-
ily flammable material
(for example hay, grass,
leaves, clothing or luggage
etc.) can come into contact
with the hot exhaust system.
Do not allow the engine to
idle unnecessarily or for pro-
longed periods
– Risk of overheating or fire.
Ride away immediately after
starting the engine.
10r28bkg3.book Seite 51 Dienstag, 25. Mai 2004 5:26 17
33
60
Starting – Riding – Parking
ABC1
Starting
e Attention:
If you attempt to start the en-
gine when the battery is flat, you
will hear the relay chattering.
Further attempts will damage
the starter relay and starter mo-
tor.
Before trying again: Recharge
the battery.
d Warning:
Do not warm up the engine
with the motorcycle at a
standstill — risk of overheating
or fire!
Ride away immediately after
starting the engine.
To avoid overheating the air-
cooled engine and possible
damage as a result, avoid
even short warm-up periods
at a standstill. Avoid high en-
gine speeds after a cold start.
Starting
10r28bkg3.book Seite 60 Dienstag, 25. Mai 2004 5:26 17
i
85
Index
HHandlebar fittingleft, 12
right, 13
Handlebar levers, 26 clutch, 26
handbrake, 27
Hazard warning flashers, 11
Headlight beam throw adjustment, 38
Heated handlebar grips, 11, 13
Helmet holder, 14
High/low (dipped) headlight
switch, 12
Horn, 12
Hydraulic fluid clutch, 37
IIgnition switch and steering lock, 6
function, 8, 9
Ignition, switching on, 58, 59
Installing System case, 19
Instruments, 6
KKill switch, 13
LLight
general instructions, 38
headlight beam throw, 38
switch, 13
MMotorcycle equipment, 81
NNeutral, 59
OOctane number (fuel), 25
Odometer, 6
Oil filler, engine, 4, 22
Oil levelchecking, 22
engine oil pressure, 7, 62
sight glass, 4
Opening the System case, 17
Overheating, 60
PPower socket, 12 V, 4
RRear brake brake fluid reservoir, 5
Removing System case, 18
Residual braking, 34
Rev. counter, 6
Rider’s equipment, 80
Riding, 64
Running in, 57
H - R
10r28bkg3.book Seite 85 Dienstag, 25. Mai 2004 5:26 17
