2004 BMW MOTORRAD K 1200 S power steering

Introductioni2
Table of contentsUse the index (
b 149) to find a
certain topic quickly.
Welcome to BMW ........... 1
General information ......... 4
Overview .......................... 7
General view, left side ..... 9
General view,
right side ....................... 11
Left handlebar
controls ......................... 12
Right handlebar
controls ......................... 13
Instrument cluster ......... 14
Headlights ..................... 15
Status indicators ........... 17
Multifunction display....... 18
Warning and telltale
lights .............................. 18
Warning indicators ......... 19
ABS warning
indicators ...................... 25Operation ....................... 29
Ignition switch and
steering lock .................. 30
Electronic immobiliser ... 31
Hazard warning
flashers.......................... 32
Tripmaster ..................... 33
Kill switch ...................... 34
Grip heating
OE
............... 35
Clock ............................. 35
Handlebar levers ........... 36
Lights ............................ 37
Turn indicators .............. 39
Seat............................... 40
Helmet holder ................ 41
Luggage loops .............. 42
Mirrors .......................... 43
Spring preload .............. 43
Shock absorbers ........... 44
ESA
OE
........................... 45
Wheels .......................... 47
Riding ............................. 49
Safety instructions ......... 50
Safety check.................. 52Making your first trip ...... 52
Before you start ............. 53
Starting .......................... 56
Riding ............................ 58
Running in ..................... 58
Shifting gear .................. 59
Placing the motorcycle
on its side stand ............ 61
Taking the motorcycle
off the side stand ........... 63
Placing the motorcycle
on the centre stand
OA
.... 65
Pushing the motorcycle
off the centre stand
OA
.... 67
Fuel................................ 67
Brake system ................. 68
Accessories ................... 73
General instructions ....... 74
Power socket ................. 74
Luggage system ............ 77
Breakdown assistance
kit for tubeless tyres ...... 82

331Operation
Securing the steering
lock• Turn the handlebars to the
full left or right lock position.
• Turn the key to position
1
OFF, while moving the han-
dlebars slightly.
» Ignition, light and all function
circuits switched off.
» Steering lock secured.
» In this position, you can
remove the key.If the motorcycle is on the
side stand, the surface of
the ground will determine
whether it is better to turn the
handlebars to the left or right.
On level ground, a secure
stance is only ensured with the
handlebars turned to the left.
On level ground, always turn
the handlebars to the left to set
the steering lock.c
With the ignition switched
off, the braking power
assistance is unavailable.
While the motorcycle is being
ridden, do not switch off the
ignition.c
Electronic immobiliserThe electronic immobiliser
helps protect your BMW
motorcycle from theft, and this
enhanced security is at your
disposal without any need for
you to set parameters or acti-
vate additional systems. The
engine of a motorcycle fitted
with this electronic immobiliser
can only be started with the
keys that belong to the vehi-
cle. You can also have your
authorised BMW motorcycle
dealer bar individual keys, for
example if a particular key
goes missing. The engine can-
not be started with a key that
has been barred.

575Accessories
If the battery voltage is too low
and/or the maximum permissi-
ble load is exceeded, the
power socket is automatically
deactivated.Operating auxiliary
devicesAuxiliary devices can only be
started up with the ignition
switched on. The auxiliary
device remains operational if
the ignition is subsequently
switched off. Approx.
15 minutes after switching off
the ignition and/or during the
restart operation, the on-
board socket is switched off to
take the load off the vehicle
electrical system.
WiringThe cables from the power
socket to the auxiliary device
must be routed in such a way
that they:
– do not impede the rider
– do not restrict or obstruct
the steering angle and
handling characteristics
– cannot be trapped
Improperly routed cables
can impede the rider.
Route the cables as described
above.c

Indexi152
Luggage
Safety information, 50
Strapping, 42MMotorcycle equipment, 5
Multifunction display, 14NNeutral, telltale light, 18PParking light, 38
Bulb, 15
Replacing the bulb, 108
Parking your motorcycle, 61, 65
Power socket,9,74,136
Pre-ride check, 53RRear light, replacing the
bulb, 108
Rear shock absorber
adjustment, 9Rear spring preload
adjustment, 9
Rear wheel stand, 104
Replacement keys, 32
Resetting the odometer, 34
Residual braking function, 71
Residual range, 34
Restoring to use, 121
Rev. counter, 14
Rider’s equipment, 6
Running in
Brake pads, 58
General information, 58
SSafety check before a
journey, 52
Safety instructions, 50
Seat
Installing, 41
Lock, 9
Placing down, 40
Removing, 40Securing the steering lock, 31
Sensor for instrument cluster
lighting, 14
Shifting gear, 59
Side stand
Folding in, 63
Position on starting, 55
Unfolding, 61
Spark plugs, technical data, 135
Speed
Safety information, 50
Technical data, 138
Speedometer, 14
Splash guard, 116
Starter, 13
Starting, 56
Symbols, 4
TTechnical data
Bolt connections, 124
Dimensions and weights, 137
Electrical system, 135
Engine, 127