2003 YAMAHA YBR125 warning lights


NOTE:
Pre-operation checks should be made each time the motorcycle is used. Su\
ch an inspection can be thoroughly accomplished
in a very short time; and the added safety it assures is more than worth\
the time involved. If any maintenance service or
adjustment is needed, consult the chart above to refer to the pages in w\
hich the service or adjustment is described.
1. The engine, exhaust pipe, and muffler will be very hot after the engine \
has been run.
Be careful not to touch them or to allow any clothing item to contact th\
em during inspection or repair.
2. If any item is not working properly, have it inspected and repaired before operating the motorcycle.
ITEM ROUTINE
PAGE
Sidestand
Fittings / Fasteners Check all chassi fittings and fasteners.
Tighten / Adjust, if necessary
Check fuel level / top up as required.
Fuel tank
Lights, signals and switches
Battery Check electrolyte level.
Replenish with “distilled water” if necessary. 6-24
4-8 , 6-5
4-8 , 6-30 ~ 6-32 6-27 ~ 6-296-24
4-9 ~ 4-10
Check for proper operation
Front brake and clutch lever pivots Check for smooth operation.
Lubricate if necessary
Check for smooth operation.
Lubricate if necessary
6-24
Check for smooth operation.
Lubricate if necessary
Rear brake and shift pedal
shafts
WARNING:

NOTE:
Pre-operation checks should be made each time the motorcycle is used. Su\
ch an inspection can be thoroughly accomplished
in a very short time; and the added safety it assures is more than worth\
the time involved. If any maintenance service or
adjustment is needed, consult the chart above to refer to the pages in w\
hich the service or adjustment is described.
1. The engine, exhaust pipe, and muffler will be very hot after the engine \
has been run.
Be careful not to touch them or to allow any clothing item to contact th\
em during inspection or repair.
2. If any item is not working properly, have it inspected and repaired before operating the motorcycle.
ITEM ROUTINE
PAGE
Sidestand
Fittings / Fasteners Check all chassi fittings and fasteners.
Tighten / Adjust, if necessary
Check fuel level / top up as required.
Fuel tank
Lights, signals and switches
Battery Check electrolyte level.
Replenish with “distilled water” if necessary. 6-24
4-8 , 6-5
4-8 , 6-30 ~ 6-32 6-27 ~ 6-296-24
4-9 ~ 4-10
Check for proper operation
Front brake and clutch lever pivots Check for smooth operation.
Lubricate if necessary
Check for smooth operation.
Lubricate if necessary
6-24
Check for smooth operation.
Lubricate if necessary
Rear brake and shift pedal
shafts
WARNING: