2003 YAMAHA YBR125 brake light

CONTENTS
DESCRIPTION............................................................. 1-1
MACHINE IDENTIFICATION ....................................... 2-1
Vehicle identification number ................................. 2-1
Engine serial number ............................................ 2-1
CONTROL FUNCTIONS .............................................. 3-1
Main switch ............................................................ 3-1
Indicator lights ........................................................ 3-2
Speedometer .......................................................... 3-3
Fuel gauge ............................................................. 3-3
Handlebar switches over left .................................. 3-4
Handlebar switches over right .............................. 3-5
Clutch lever .......................... .................................. 3-6
Shift pedal ............................................................. 3-6
Front brake lever ................................................... 3-7
Rear brake pedal ................................................... 3-7
Fuel tank cap ......................................................... 3-8
Fuel cock ............................................................... 3-9
Starter lever ......................................................... 3-10
Steering lock ....................... ................................ 3-11
Seat ...................................................................... 3-12
Side covers ......................................................... 3-13
Rear shock absorber adjustment........................ 3-14
Clutch switch operation check ............................ 3-15
XIPRE-OPERATION
CHECKS........................................ 4-1
Brakes ................................................................... 4-3
Brake fluid leakage ................................................ 4-4
Engine oil ................................................................ 4-4
Tires ........................................................................\
4-5
Clutch ..................................................................... 4-8
Throttle grip ............................ ................................ 4-8
Fitting/Fasteners .................................................... 4-8
Switches ................................................................ 4-8
Wheels ......................................................... 4-8
Fuel ........................................................... 4-9
OPERATION AND IMPORT ANT RIDING POINTS....... 5-1
Starting a cold engine .................................................. 5-2
Starting a warm engine ................................................ 5-4
Warming up the engine ................................................ 5-4
Shifting ........................................................................\
.. 5-5
Engine Break-in ............................................................ 5-6
Parking ........................................................................\
.. 5-7
CONTENTS
DESCRIPTION ............................................................. 1-1
MACHINE IDENTIFICATION ....................................... 2-1
Vehicle identification number ................................. 2-1
Engine serial number ............................................ 2-1
CONTROL FUNCTIONS .............................................. 3-1
Main switch ............................................................ 3-1
Indicator lights ........................................................ 3-2
Speedometer .......................................................... 3-3
Fuel gauge ............................................................. 3-3
Handlebar switches over left .................................. 3-4
Handlebar switches over right .............................. 3-5
Clutch lever .......................... .................................. 3-6
Shift pedal ............................................................. 3-6
Front brake lever ................................................... 3-7
Rear brake pedal ................................................... 3-7
Fuel tank cap ......................................................... 3-8
Fuel cock ............................................................... 3-9
Starter lever ......................................................... 3-10
Steering lock ....................... ................................ 3-11
Seat ...................................................................... 3-12
Side covers ......................................................... 3-13
Rear shock absorber adjustment........................ 3-14
Clutch switch operation check ............................ 3-15
XIPRE-OPERATION
CHECKS........................................ 4-1
Brakes ................................................................... 4-3
Brake fluid leakage ................................................ 4-4
Engine oil ................................................................ 4-4
Tires ........................................................................\
4-5
Clutch ..................................................................... 4-8
Throttle grip ............................ ................................ 4-8
Fitting/Fasteners .................................................... 4-8
Switches ................................................................ 4-8
Wheels ......................................................... 4-8
Fuel ........................................................... 4-9
OPERATION AND IMPORT ANT RIDING POINTS....... 5-1
Starting a cold engine .................................................. 5-2
Starting a warm engine ................................................ 5-4
Warming up the engine ................................................ 5-4
Shifting ........................................................................\
.. 5-5
Engine Break-in ............................................................ 5-6
Parking ........................................................................\
.. 5-7

PERIODIC MAINTENANCE AND MINOR REPAIRS..... 6-1
Tool kit..................................................................... 6-2
PERIODIC MAINTENANCE/LUBRICATION......... 6-3
Torque specifications............................................. 6-5
Engine oil................................................................ 6-6
Oil pressure ............................................................ 6-9
Air filter .................................................................6-10
Carburetor adjustment ......................................... 6-12
Valve clearance adjustment.................................6-12
Idle speed adjustment..........................................6-13
Throttle cable adjustment....................................6-14
Spark plug inspection...........................................6-15
Rear brake adjustment ......................................... 6-16
Brake light switch adjustment ..............................6-17
Checking the front brake pads and rear brake
shoes.................................................................... 6-17
Front brake...........................................................6-18
Rear brake ............................................................ 6-18
Inspecting the brake fluid level ............................6-19
Brake fluid replacement.......................................6-20
Clutch adjustment................................................6-20
Drive chain slack check .......................................6-21
Drive chain slack adjustment...............................6-22
Drive chain lubrication..........................................6-23
Cable inspection and lubrication..........................6-23
Throttle cable and grip lubrication.......................6-24Brake and shift pedals ......................................... 6-24
Brake and clutch levers ....................................... 6-24
Sidestand ............................................................. 6-24
Front fork inspection ............................................ 6-25
Steering inspection.............................................. 6-26
Wheel bearings.................................................... 6-26
Battery.................................................................. 6-27
Replenishing the battery fluid .............................. 6-28
Fuse replacement................................................ 6-29
Headlight bulb replacement................................. 6-30
Turn signal bulb replacement.............................. 6-32
Taillight bulb replacement.................................... 6-32
Front wheel removal............................................. 6-33
Front wheel installation........................................ 6-34
Rear wheel removal............................................. 6-35
Rear wheel installation ......................................... 6-36
Troubleshooting.................................................... 6-36
Troubleshooting chart.......................................... 6-37
CLEANING AND STORAGE....................................... 7-1
CLEANING............................................................. 7-1
STORAGE.............................................................. 7-2
SPECIFICATIONS ........................................................ 8-1
XII
PERIODIC MAINTENANCE AND MINOR REPAIRS..... 6-1
Tool kit..................................................................... 6-2
PERIODIC MAINTENANCE/LUBRICATION......... 6-3
Torque specifications............................................. 6-5
Engine oil................................................................ 6-6
Oil pressure ............................................................ 6-9
Air filter .................................................................6-10
Carburetor adjustment ......................................... 6-12
Valve clearance adjustment.................................6-12
Idle speed adjustment..........................................6-13
Throttle cable adjustment....................................6-14
Spark plug inspection...........................................6-15
Rear brake adjustment ......................................... 6-16
Brake light switch adjustment ..............................6-17
Checking the front brake pads and rear brake
shoes.................................................................... 6-17
Front brake...........................................................6-18
Rear brake ............................................................ 6-18
Inspecting the brake fluid level ............................6-19
Brake fluid replacement.......................................6-20
Clutch adjustment................................................6-20
Drive chain slack check .......................................6-21
Drive chain slack adjustment...............................6-22
Drive chain lubrication..........................................6-23
Cable inspection and lubrication..........................6-23
Throttle cable and grip lubrication.......................6-24Brake and shift pedals ......................................... 6-24
Brake and clutch levers ....................................... 6-24
Sidestand ............................................................. 6-24
Front fork inspection ............................................ 6-25
Steering inspection.............................................. 6-26
Wheel bearings.................................................... 6-26
Battery.................................................................. 6-27
Replenishing the battery fluid .............................. 6-28
Fuse replacement................................................ 6-29
Headlight bulb replacement................................. 6-30
Turn signal bulb replacement.............................. 6-32
Taillight bulb replacement.................................... 6-32
Front wheel removal............................................. 6-33
Front wheel installation........................................ 6-34
Rear wheel removal............................................. 6-35
Rear wheel installation ......................................... 6-36
Troubleshooting.................................................... 6-36
Troubleshooting chart.......................................... 6-37
CLEANING AND STORAGE....................................... 7-1
CLEANING............................................................. 7-1
STORAGE.............................................................. 7-2
SPECIFICATIONS ........................................................ 8-1
XII


NOTE:
Pre-operation checks should be made each time the motorcycle is used. Su\
ch an inspection can be thoroughly accomplished
in a very short time; and the added safety it assures is more than worth\
the time involved. If any maintenance service or
adjustment is needed, consult the chart above to refer to the pages in w\
hich the service or adjustment is described.
1. The engine, exhaust pipe, and muffler will be very hot after the engine \
has been run.
Be careful not to touch them or to allow any clothing item to contact th\
em during inspection or repair.
2. If any item is not working properly, have it inspected and repaired before operating the motorcycle.
ITEM ROUTINE
PAGE
Sidestand
Fittings / Fasteners Check all chassi fittings and fasteners.
Tighten / Adjust, if necessary
Check fuel level / top up as required.
Fuel tank
Lights, signals and switches
Battery Check electrolyte level.
Replenish with “distilled water” if necessary. 6-24
4-8 , 6-5
4-8 , 6-30 ~ 6-32 6-27 ~ 6-296-24
4-9 ~ 4-10
Check for proper operation
Front brake and clutch lever pivots Check for smooth operation.
Lubricate if necessary
Check for smooth operation.
Lubricate if necessary
6-24
Check for smooth operation.
Lubricate if necessary
Rear brake and shift pedal
shafts
WARNING:

NOTE:
Pre-operation checks should be made each time the motorcycle is used. Su\
ch an inspection can be thoroughly accomplished
in a very short time; and the added safety it assures is more than worth\
the time involved. If any maintenance service or
adjustment is needed, consult the chart above to refer to the pages in w\
hich the service or adjustment is described.
1. The engine, exhaust pipe, and muffler will be very hot after the engine \
has been run.
Be careful not to touch them or to allow any clothing item to contact th\
em during inspection or repair.
2. If any item is not working properly, have it inspected and repaired before operating the motorcycle.
ITEM ROUTINE
PAGE
Sidestand
Fittings / Fasteners Check all chassi fittings and fasteners.
Tighten / Adjust, if necessary
Check fuel level / top up as required.
Fuel tank
Lights, signals and switches
Battery Check electrolyte level.
Replenish with “distilled water” if necessary. 6-24
4-8 , 6-5
4-8 , 6-30 ~ 6-32 6-27 ~ 6-296-24
4-9 ~ 4-10
Check for proper operation
Front brake and clutch lever pivots Check for smooth operation.
Lubricate if necessary
Check for smooth operation.
Lubricate if necessary
6-24
Check for smooth operation.
Lubricate if necessary
Rear brake and shift pedal
shafts
WARNING:

6-4
*
**
***
: It is recommended that these items be serviced by a Yamaha dealer.
: Molybdenum disulfide grease.
: Lithium soap based grease.
NOTE:
Brake fluid replacement:
1. When disassembling the master cylinder or caliper cylinder, replace the brake fluid. Normally check the brake fluid level and add fluid as required.
2. On the inner parts of the master cylinder and caliper cylinder, replace the oil seals every two years.
3. Replace the brake hoses every four years, or if cracked or damaged.
ITEM
Front forks*
Centerstand and
sidestand
Control cables: throttle /
clutch / front brake Rear shock absorber*
Drive chain
Fittings / fasteners
Check operation / oil leakage.
Check operation, looseness.
Adujst / Check operation
Lubricate every 12,000 Km.
Check chain slack / lubricate, adjust if necessary.
Check looseness. REMARKS1,000KM
Lights and flashers
Nuts and bolts
Motorcycle Aspect
Check operation.
Check tighten.
General Check
EVERY
3,000KM
OR EVERY3,000KM
Check operation / oil leakage.
Every 500 Km
6-4
*
**
***
: It is recommended that these items be serviced by a Yamaha dealer.
: Molybdenum disulfide grease.
: Lithium soap based grease.
NOTE:
Brake fluid replacement:
1. When disassembling the master cylinder or caliper cylinder, replace the brake fluid. Normally check the brake fluid level and add fluid as required.
2. On the inner parts of the master cylinder and caliper cylinder, replace the oil seals every two years.
3. Replace the brake hoses every four years, or if cracked or damaged.
ITEM
Front forks*
Centerstand and
sidestand
Control cables: throttle /
clutch / front brake Rear shock absorber*
Drive chain
Fittings / fasteners
Check operation / oil leakage.
Check operation, looseness.
Adujst / Check operation
Lubricate every 12,000 Km.
Check chain slack / lubricate, adjust if necessary.
Check looseness. REMARKS1,000KM
Lights and flashers
Nuts and bolts
Motorcycle Aspect
Check operation.
Check tighten.
General Check
EVERY
3,000KM
OR EVERY3,000KM
Check operation / oil leakage.
Every 500 Km

!!
Rear brake adjustment
A
a. Free play: 20 ~ 30 mm (0.8 ~ 1.2 in)
Check the free play the rear brake pedal free play should
be adjusted to 20 ~ 30 mm (0.8 ~ 1.2 in) at the brake pedal
end.
Turn the adjusting nut in direction  to increase free play
and in direction  to decrease free play.
Press the brake pedal several times and check if the wheel
turns free when the pedal is released.
For brake pedal adjustment, be sure to proceed as
follows (it is advisable to have a Yamaha dealer make
this adjustment.)
Check the operation of the brake light after adjusting
the rear brake.
1. Adjusting nut
CAUTION:
!!
Rear brake adjustment
A
a. Free play: 20 ~ 30 mm (0.8 ~ 1.2 in)
Check the free play the rear brake pedal free play should
be adjusted to 20 ~ 30 mm (0.8 ~ 1.2 in) at the brake pedal
end.
Turn the adjusting nut in direction  to increase free play
and in direction  to decrease free play.
Press the brake pedal several times and check if the wheel
turns free when the pedal is released.
For brake pedal adjustment, be sure to proceed as
follows (it is advisable to have a Yamaha dealer make
this adjustment.)
Check the operation of the brake light after adjusting
the rear brake.
1. Adjusting nut
CAUTION:

6-17
Brake light switch adjustment
The rear brake light switch is activated by the brake pedal
and is properly adjusted when the brake light comes on just
before braking takes effect. To adjust the rear brake light
switch, hold the switchbody so it does not rotate while turning
the adjusting nut.
Turn the adjusting nut in direction a to make the brake
light come on earlier.
Turn the adjusting nut in direction b to make the brake
light come on later.
1. Brake light switch 2. Adjusting nut
Checking the front brake pads and rear brake shoes
A wear indicator is provided on each brake. This indicator
allows checking of brake pad/shoe wear without
disassembling the brake.
6-17
Brake light switch adjustment
The rear brake light switch is activated by the brake pedal
and is properly adjusted when the brake light comes on just
before braking takes effect. To adjust the rear brake light
switch, hold the switchbody so it does not rotate while turning
the adjusting nut.
Turn the adjusting nut in direction a to make the brake
light come on earlier.
Turn the adjusting nut in direction b to make the brake
light come on later.
1. Brake light switch 2. Adjusting nut
Checking the front brake pads and rear brake shoes
A wear indicator is provided on each brake. This indicator
allows checking of brake pad/shoe wear without
disassembling the brake.

!
Drive chain slack adjustment
1. Locknut 2. Adjusting bolt
1. Loosen the rear brake pedal free play adjusting nut.
2. Loosen the axle nut.
3. Loosen the chain adjusting locknuts on each chainpuller. To tighten the chain, turn the chain adjusting nuts
in direction  .To loosen the chain turn the chain
adjusting nuts in direction  and push the wheel
forward. Turn each chain adjusting nut exactly the same
amount to maintain correct axle alignment. There are
marks on each chain puller. Use these marks to align
the rear wheel. Too little chain slack will overload the engine and other vital
parts. Keep the slack within the specified limits.
To maintain correct axle alignment, Ensure the notch on
the adjuster is on the same mark on left and right side
4. After adjusting, be sure to tighten each chain adjusting
locknut. The tighten the axle nut to the specified torque
Axle nut torque: 91 N.m (9.1 Kgf.m, 66 lbf.ft)
Locknut torque: 15 N.m (1.5 Kgf.m, 11 lbf.ft)
5. Adjust the free play in the brake pedal.
Check the operation of the brake light after adjusting
the rear brake.
CAUTION:
CAUTION:
!
Drive chain slack adjustment
1. Locknut 2. Adjusting bolt
1. Loosen the rear brake pedal free play adjusting nut.
2. Loosen the axle nut.
3. Loosen the chain adjusting locknuts on each chain puller. To tighten the chain, turn the chain adjusting nuts
in direction  .To loosen the chain turn the chain
adjusting nuts in direction  and push the wheel
forward. Turn each chain adjusting nut exactly the same
amount to maintain correct axle alignment. There are
marks on each chain puller. Use these marks to align
the rear wheel. Too little chain slack will overload the engine and other vital
parts. Keep the slack within the specified limits.
To maintain correct axle alignment, Ensure the notch on
the adjuster is on the same mark on left and right side
4. After adjusting, be sure to tighten each chain adjusting
locknut. The tighten the axle nut to the specified torque
Axle nut torque: 91 N.m (9.1 Kgf.m, 66 lbf.ft)
Locknut torque: 15 N.m (1.5 Kgf.m, 11 lbf.ft)
5. Adjust the free play in the brake pedal.
Check the operation of the brake light after adjusting
the rear brake.
CAUTION:
CAUTION:

6-36
Rear wheel installation
When installing the rear wheel, reverse the removal
procedures. Pay attention to the following points:
1. Adjust the drive chain.
2. Tighten the axle nut and the tension bar nut to the
specified tightening torque.
Axle nut torque: 91 N.m ( 9.1 Kgf.m, 66 lbf.ft)
Tension bar nut: 19 N.m (1.9 Kgf.m, 14 lbf.ft)
3. Adjust the rear brake.
Check the operation of the brake light after adjusting the
rear brake Troubleshooting
Although Yamaha motorcycles receive a rigid inspection
before shipment from the factory, trouble may occur during
operation. Any problem in the fuel, compression, or ignition
systems can cause poor starting and loss of power. The
troubleshooting chart describes a quick, easy, procedure
for making checks. If your motorcycle requires any repair,
bring it to a Yamaha dealer. The skilled technicians at a
Yamaha dealership have the tools, experience, and know-
how to properly service your motorcycle. Use only genuine
Yamaha parts on your motorcycle. Imitation parts may look
like Yamaha parts, but they are often inferior. Consequently,
they have a shorter service life and can lead to expensive
repair bills.
CAUTION:
6-36
Rear wheel installation
When installing the rear wheel, reverse the removal
procedures. Pay attention to the following points:
1. Adjust the drive chain.
2. Tighten the axle nut and the tension bar nut to the
specified tightening torque.
Axle nut torque: 91 N.m ( 9.1 Kgf.m, 66 lbf.ft)
Tension bar nut:
19 N.m (1.9 Kgf.m, 14 lbf.ft)
3. Adjust the rear brake.
Check the operation of the brake light after adjusting the
rear brake Troubleshooting
Although Yamaha motorcycles receive a rigid inspection
before shipment from the factory, trouble may occur during
operation. Any problem in the fuel, compression, or ignition
systems can cause poor starting and loss of power. The
troubleshooting chart describes a quick, easy, procedure
for making checks. If your motorcycle requires any repair,
bring it to a Yamaha dealer. The skilled technicians at a
Yamaha dealership have the tools, experience, and know-
how to properly service your motorcycle. Use only genuine
Yamaha parts on your motorcycle. Imitation parts may look
like Yamaha parts, but they are often inferior. Consequently,
they have a shorter service life and can lead to expensive
repair bills.
CAUTION: