2003 YAMAHA GRIZZLY 660 headlight bulb

Rear brake adjustment .................... 8-101
Adjusting the rear brake light
switch ............................................. 8-105
Cable inspection and lubrication ..... 8-107
Brake lever and brake pedal
lubrication ...................................... 8-109
Rear knuckle upper and lower pivot
lubrication ....................................... 8-111
Wheel removal ................................ 8-113
Wheel installation ............................ 8-115
Battery ............................................. 8-117
Battery maintenance ....................... 8-121
Fuse replacement ............................ 8-123
Replacing the headlight bulb ........... 8-127
Headlight beam adjustment ............. 8-131
Tail/brake light bulb replacement ..... 8-133
Troubleshooting ............................... 8-135
Troubleshooting chart ...................... 8-137CLEANING AND STORAGE .................. 9-1
A. Cleaning ......................................... 9-1
B. Storage ........................................... 9-7
SPECIFICATIONS................................. 10-1
HOW TO USE THE CONVERSION
TABLE .................................................. 11-1
91011
U5KM60.book Page 3 Thursday, June 21, 2001 2:40 PM

8-127 1. Cover
1. Cache
1. Cubierta
1. Bulb holder cover
1. Cache du support d’ampoule
1. Cubierta del portabombillas
EBU00685*
Replacing the headlight bulb
If the headlight bulb burns out, replace it as fol-
lows:
1. Remove the cover at the rear of the head-
light.
2. Remove the bulb holder cover.
U5KM60.book Page 127 Thursday, June 21, 2001 2:40 PM

8-129 1. Bulb holder
1. Fixation d’ampoule
1. Portabombillas
3. Remove the bulb holder by turning it counter-
clockwise.
4. Remove the defective bulb by pushing it in
and turning it counterclockwise.
WARNING
The headlight bulb is hot when it is on and im-
mediately after it is turned off. Wait for the bulb
to cool down before touching or removing it.
You can be burned, or a fire could start if the
bulb touches something flammable. 5. Put a new bulb into position by pushing it in
and turning it clockwise.
6. Install the bulb holder by turning it clockwise.
7. Install the bulb holder cover.
U5KM60.book Page 129 Thursday, June 21, 2001 2:40 PM

10-6
Headlight type: Krypton bulb
Bulb voltage, wattage
× quantity:
Headlight 12 V, 30 W / 30 W
× 2
Brake/tail light 12 V, 21 W / 5 W
× 1
Indicator light:
Neutral indicator light LED
× 1
Reverse indicator light LED
× 1
Coolant temperature warning light LED
× 1
Park position indicator light LED
× 1
High gear position indicator light LED
× 1
Low gear position indicator light LED
× 1
Differential gear lock indicator light LED
× 1
Specified fuses:
Main fuse 30 A
Headlight fuse 15 A
Ignition fuse 10 A
Auxiliary DC jack fuse 10 A
Four-wheel drive fuse 3 A
Signaling system fuse 10 A
Odometer fuse (backup) 10 AModel YFM660FP
U5KM60.book Page 6 Thursday, June 21, 2001 2:40 PM