Page 16 of 394

EBU00015
1-CONTENTS
LOCATION OF THE WARNING AND 
SPECIFICATION LABELS ....................... 1-1
SAFETY INFORMATION ......................... 2-1
DESCRIPTION AND 
MACHINE IDENTIFICATION ................... 3-1
Identification number records ............... 3-3
Key identification number ..................... 3-5
Vehicle identification number ............... 3-7
Model label ........................................... 3-9
CONTROL FUNCTIONS ......................... 4-1
Main switch........................................... 4-1
Indicator and warning lights.................. 4-3
Oil temperature warning light 
checking method ................................ 4-5
Speedometer ........................................ 4-9
Fuel gauge ......................................... 4-11
Handlebar switches ............................ 4-13
Throttle lever ...................................... 4-17
Speed limiter ...................................... 4-19
Front brake lever ................................ 4-21
Rear brake pedal and lever ................ 4-23
1234
Parking brake ..................................... 4-25
Shift pedal .......................................... 4-27
Drive select lever ............................... 4-27
Recoil starter ...................................... 4-29
Fuel tank cap ..................................... 4-29
Fuel cock............................................ 4-31
Starter (choke) ................................... 4-33
Seat.................................................... 4-35
Storage box........................................ 4-37
Front carrier ....................................... 4-37
Rear carrier ........................................ 4-37
Front shock absorber adjustment ...... 4-39
Rear shock absorber adjustment ....... 4-41
Auxiliary DC jack ................................ 4-43
PRE-OPERATION CHECKS ................... 5-1
Front and rear brakes .......................... 5-5
Fuel ...................................................... 5-9
Engine oil/transfer gear oil ................. 5-13
Final gear oil/Differential gear oil ....... 5-17
Throttle lever ...................................... 5-17
Fittings and Fasteners ....................... 5-19
Lights ................................................. 5-19
Switches............................................. 5-19
5
U4SH6A.book  Page 1  Thursday, May 30, 2002  1:25 PM 
     
        
        Page 66 of 394
4-5
EBU00733
Oil temperature warning light checking method 
ACB-10E
Turn  the main switch to “ON” and the 
engine stop switch to “”.
Oil temperature warning 
light does not come on.
Oil temperature warning 
light comes on.
Check engine oil temperature.
Oil temperature warning 
light does not come on.
Engine oil temperature and 
electrical circuit are OK. Go 
ahead with riding.
Push start switch with the 
transmission in neutral.
Ask a Yamaha dealer to 
inspect the electrical circuit.
Oil tempera-
ture is low.
Allow to cool.
Oil tempera-
ture is high.
Oil temperature 
warning light comes 
on momentarily.
U4SH6A.book  Page 5  Thursday, May 30, 2002  1:25 PM 
     
        
        Page 266 of 394

8-13 1. Oil filler cap
1. Bouchon de remplissage d’huile
1. Tapa del orificio de llenado de aceite
1. Dipstick 2. Maximum level mark
3. Minimum level mark
1. Jauge 2. Repère de niveau maximum
3. Repère de niveau minimum
1. Varilla 2. Marca de nivel máximo
3. Marca de nivel minimo
EBU01233
Engine oil
Engine oil level measurement
1. Place the ATV on a level surface.
2. Warm up the engine for several minutes, and
then stop it.
3. Remove the engine oil filler cap and wipe off
the dipstick with a clean rag. Insert the dip-
stick in the filler hole without screwing it in.NOTE:_ Wait a few minutes until the oil level settles before
checking. _4. Remove the dipstick and check the oil level.
5. The oil level should be between the maxi-
mum and minimum level marks. If the engine
oil is below the minimum level mark, add the
specified amount of the specified engine oil to
raise it to the specified level.CAUTION:_ Make sure that no foreign material enters the
crankcase. _
U4SH6A.book  Page 13  Thursday, May 30, 2002  1:25 PM