INSTRUMENT AND CONTROL FUNCTIONS
3
EAU03034
Indicator and warning lights
TEMP
123
ZAUM0254
1. Turn signal indicator light “ ”
2. High beam indicator light “
”
3. Oil indicator light “ ”
EAU00057
Turn signal indicator light “ ”
This indicator light flashes when the
turn signal switch is pushed to the left
or right.
EAU00063
High beam indicator light “ ”
This indicator light comes on when the
high beam of the headlight is switched
on.
EAU02958
Oil level warning light “ ”
This warning light comes on when the
key is in the “
” position or when the
oil level in the 2-stroke engine oil tank
is low during operation. If the warning
light comes on during operation, stop
immediately and fill the oil tank with
Yamalube 2 or equivalent 2-stroke
engine oil of either JASO grade "FC"
or ISO grades "EG-C" or "EG-D". The
warning light should go off after the 2-
stroke engine oil tank has been refilled.
NOTE :
If the warning light does not come on
when the key is in the “
” position or
does not go off after the 2-stroke engine
oil tank has been refilled, have a Yamaha
dealer check the electrical circuit.
EC000000
Do not operate the scooter until you
know that the engine oil level is
sufficient.
CAUTION:
EAU01716
Coolant temperature warning light
“
”
This warning light comes on when the
engine overheats. When this occurs,
stop the engine immediately and allow
the engine to cool.
EC000002
Do not operate the engine if it is
overheated.
CAUTION:
TEMP
1ZAUM0255
1. Coolant temperature warning light “ ”
3-2
INSTRUMENT AND CONTROL FUNCTIONS
3
EAU00118
Handlebar switches
EAU03888
Dimmer switch “/”
Set this switch to “
” for the high beam
and to “
” for the low beam.
EAU03889
Turn signal switch “/”
To signal a right-hand turn, push this switch
to “
”. To signal a left-hand turn, push this
switch to “
”. When released, the switch
returns to the center position. To cancel the
turn signal lights, push the switch in after it
has returned to the center position.
EAU00129
Horn switch “”
Press this switch to sound the horn.
EAUM0063
Start switch “”
Push this switch while applying the front
or rear brake to crank the engine with
the starter.
EC000005
See page 5-2 for starting instruc-
tions prior to starting the engine.
1
2 3
ZAUM0258
1
ZAUM0261
1. Horn switch “”
2. Turn signal switch “/”
3. Dimmer switch “
/”
CAUTION:
1. Start switch “”
3-4
