Turn the key again within 10 seconds to unlock other doors, trunk/tailgate.
One turn with the key  towards "lock" in the driver's door locks all doors, trunk/tailgate and  fuel filler  door with a  10
minutes delay in the fuel filler  door.
WARNING!
If the doors are locked while driving, this  may hinder rapid access to the occupants of the car in the event of an
accident. (Also see information on "Child  safety locks").
Central locking  button
Central locking switch
You can use the button to lock or unlock all doors (unlock only for 25 seconds after locking by remote).
LEFT side of button: lock
RIGHT side of button: unlock
Note:  If the key  is in the ignition switch and  you close the driver's door, the driver's door will be  immediately
unlocked again in order to prevent accidentally locking the car with the keys left inside the car.
pg. 43 Alarm
Alarm 
The radio signal emitted from  the transmitter, which  is used to set/unset the alarm, is a  "rolling code" signal. This
means that the signal is changed randomly for each transmission and  is intended  to help prevent unauthorized
recording of the code. 
When armed (set), the alarm continuously monitors a  number of points  on the car. The following conditions will set off
the alarm:
 The hood is opened
 The trunk/tailgate is opened
 A door is opened
 The ignition switch is tampered with 
The alarm will sound for 30 second intervals,  with a  10 second pause between intervals.  This function cannot be
interrupted.
 If the battery or the siren  are disconnected, the alarm will sound for five minutes
Arming (setting) the alarm  
The alarm can be  armed in the following ways:
ProCarManuals.com 
If an  incorrect code has been entered  "Error" is displayed. Enter the correct code. After three unsuccessful coding
attempts the set will lock and  remain locked for two hours.
"OFF" is displayed. 
During this waiting period:
 the battery must  be  connected
 the ignition key  must  be  turned to position I
the unit must  be  turned on
Make sure the headlights are turned off to help prevent battery drain.
Enter the code again once 2 hours have elapsed.
pg. 131 Audio system  HU-415
1. Switch On/off  (push)
Volume  (turn) 
2. Selector  knob : 
Select  the channel (turn) 
CD changer - Selecting disc (turn) 
Program  radio frequency in a  channel (push) 
3. Selector  knob for choosing (turn)  : 
Radio 
Cassette 
CD changer (option) 
Mode  knob (push) for setting :
Bass, Treble, Fader and  Balance
4. Radio  - Station seek up/down 
Cassette position  - Selecting next/previous  track 
CD  position  - Selecting next/previous  track
5. Radio  - Manual station selection 
Cassette position  - Fast winding forward/  backwards 
CD -position  - Fast winding forwards/ backwards
6. Display
7. Random for CD  (Description for CD is applicable when a  CD Changer is connected)  
8. SCAN
9. Dolby B NR  noise reduction
10. Auto store of radio stations
11. Tape direction selector/
12. Cassette opening
13. Tape eject
ProCarManuals.com