6You can find your destination using various
methods. See page 7
through 22 for the de-
tailed steps.
1. By Home (
switch on the Destina-
tion screen): You can select your own
home without entering the address each
time. In this case, it is necessary to regis-
ter your home beforehand. See page 7
for the detailed steps.
2. By Preset destination (
— switches on the Destination screen):
You can select one of 5 preset destina-
tions directly. In this case, it is necessary
to register the destinations beforehand.
See page 7 for the detailed steps.
3. By Address: You can input the house
number and the street address by using
the input keys. See page 8 for the de-
tailed steps.
4. By Point of Interest: You can select one of the many points of interest that have
been already stored in the system’s data-
base. There are more than 50 categories
to choose from including restaurants,
banks and automotive places. See page
10 for the detailed steps. 5. By Marked point:
You can register your
own favorite destinations as a “Marked
Point”. The system allows you to store up
100 marked points. See page 17 for the
detailed steps.
6. By Previous destination: You can select a destination from any of the last 20 pre-
viously set destinations. See page 17 for
the detailed steps.
7. By Emergency: You can select one of the three points of emergency service points
that have been already stored in the sys-
tem’s database. See page 18 for the de-
tailed steps.
8. By Intersection: Yo u c a n e n t e r t h e
names of two intersecting streets. This is
helpful if you do not know the specific
street address of your destination but
know the general vicinity. See page 19 for
the detailed steps.
9. By Freeway Entrance/Exit: You can en-
ter the name of the freeway (interstate)
entrance or exit. See page 20 for the de-
tailed steps.
10. By Previous starting point: You can en-
ter a point where the system has started
to guide last time. See page 21 for the de-
tailed steps. 11. By Map selection:
You can select a des-
tination simply by touching the location on
the displayed map. See page 22 for the
detailed steps.
INFORMATION
When inputting the destination, the
response to the switch may be slow.
“Points of interest” registration is
made based on the NAVTECH “Stan-
dard POI Inclusion List” and infoU-
SA POI data.
If there is no point registered,
switches such as “Marked point”,
“Previous destination” or “Previous
starting point” are dimmed and not
available.
The route for returning may not be
the same as that for going.
The route guidance to the destina-
tion may not be the shortest route or
a route without traffic congestion.
Route guidance may not be available
if there is no road data for the speci-
fied location.
