2003 TOYOTA LAND CRUISER navigation

97
2003 Land Cruiser 100 Navigation (OM60A00U)
3UE028
In case of touching the “Period” switch,
you can display the memo list as long as
you desired. Touch numeral keys to input
your desired search period. After input-
ting a search period of time, touch the
“OK” switch. The Memo list screen will
be displayed.
You can input a search period from January
1. 2000 through December 31. 2020.
3UE029a
If you want to delete and/or edit the
memo, touch the
switch of the
memo.
If you want to delete all of the memo,
touch the
“Delete all” switch. A mes-
sage appears on the display. To delete,
touch the
“Yes” switch. If not, touch the
“No” switch. If you want to remove all of the color of
date you input, touch the
“Remove
color of date”
switch. A message ap-
pears on the display. To remove it, touch
the
“Yes” switch. If not, touch the “No”
switch.
3UE024
To edit: Touch the “Edit” switch. (See
page 96 for details.)
To d e l e t e : Touch the
“Delete” switch.
(See page 96 for details.)

98
2003 Land Cruiser 100 Navigation (OM60A00U)
The speech command system allows you
to operate the navigation system without
using your hands.
1. Push the speech command switch.
A beep sounds and an indicator is shown at
the top left of the display.
UNL302a
2. Give a command while an indicator is
shown in the display. (See ”Speech com-
mand list” on page 152.)
If the navigation system does not respond or
the confirmation screen does not disappear,
please push the speech command switch
and try again.
If no command is given, a beep sounds and
the indicator disappears 6 seconds later.
If the system does not recognize your
speech, the system will respond with this
message (“System does not recognize this
command, please rephrase your com-
mand.”). Start the operation from the begin-
ning.
 Microphone
It is unnecessary to speak directly into
the microphone when giving a command.
Speech command system

99
2003 Land Cruiser 100 Navigation (OM60A00U)
Speech command example: Searching
for a route to your home.
1. Push the speech command switch.
2. Say ”Go home”.
If your home is not registered, you will hear
”Home is not registered”.
3UE030
3. If you hear ”Are you sure that you want
a route to home?” (also shown on the dis-
play), push the speech command switch
and say ”Yes” .
If you say ”No”, the search will be canceled.
4. You will hear ”Calculating route to
home” and then the system starts
searching for a route.
INFORMATION
In the following conditions, the system
may not recognize the command prop-
erly.
 The command is not correct or clear.
 There are some noises such as wind
noise, etc.

100
2003 Land Cruiser 100 Navigation (OM60A00U)

SECTION IV
101
2003 Land Cruiser 100 Navigation (OM60A00U)
OTHER FUNCTIONS
Trip information 102
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .\
. . . . . . . . . . . .
Screen transition 103
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
. . . . . . . . . . . .
Screen adjustment 103
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
. . . . . . . . . .

102
2003 Land Cruiser 100 Navigation (OM60A00U)
Trip information such as driving time,
driving distance, average vehicle speed,
fuel consumption, etc. can be displayed
on the screen.
1. Push the
”INFO” button to display
the information menu screen.
UNG403a
2. To u c h t h e ”Trip Information”switch.
UNG401
Consumption
The consumption is calculated and dis-
played based on the driving distance and
the fuel consumption for 2 seconds with
engine running.
The value is updated every 2 seconds.
If you are driving at low speeds just before
stopping, the accurate figure way not be
shown.
After Refueling
The consumption after refueling is calcu-
lated and displayed based on the total
driving distance and the total fuel con-
sumption after refueling.
The value is updated every 10 seconds. When refueling, be
sure to stop your vehicle
and turn the ignition switch off.
Cruising Range
How far you can drive with the remaining
fuel is displayed.
Even though the display indicates sufficient
miles to run, if the fuel level on the fuel gauge
approaches ”E” or the low fuel level warning
light comes on, fill the fuel tank as soon as
possible.
INFORMATION
 When you first start driving your new
vehicle, the correct cruising range
may not be shown. One or more re-
fills of 10 gallons or more may be re-
quired for the system to set its cal-
ibration.
 The cruising range displayed is cal-
culated based on past fuel consump-
tion and may vary according to your
driving style and road condition.
Trip information

103
2003 Land Cruiser 100 Navigation (OM60A00U)
Average Speed
The Average Speed is displayed. The av-
erage vehicle speed is calculated and dis-
played based on the total driving distance
and the total driving time after the engine
is started.
The displayed value is updated every 10
seconds.
To calculate from the beginning, touch the
”Reset” switch.
Distance
The distance after engine starting is dis-
played.
When refueling, be sure to stop your vehicle
and turn the ignition switch off.
To calculate from the beginning, touch the
”Reset” switch. The function returning to the previous
screen from the audio or air conditioner
screen is selectable.
1. Push
the
”INFO” button on the bezel
to display the Information menu screen
and touch the
”Screen Transition”switch.
UNG404
2. Select the ”ON” or ”OFF” and then
touch the
”OK”.
ON: The previous screen automatically re-
turns from the audio or air conditioner screen
20 seconds after the end of audio or air con-
ditioner screen operation.
OFF: The audio or air conditioner screen re-
mains on. You can adjust the brightness or contrast
of the screen depending on the bright-
ness of your surroundings. Y
ou also can
turn the display off.
Push the
”DISPLAY” button on the bez-
el to display the Display screen.
Screen transitionScreen adjustment

104
2003 Land Cruiser 100 Navigation (OM60A00U)
UNG405
Contrast and brightness adjustment
CONTRAST ”+”:
Strengthens the contrast of the screen.
CONTRAST ””:
Weakens the contrast of the screen.
BRIGHTNESS ”+”: Brightens the screen.
BRIGHTNESS ””: Darkens the screen.
The screen turns off when you push the
”SCREEN OFF”. To turn the display screen
back on, push any bezel switch such as
”INFO”, etc. The selected screen appears.
UNX401
Color and tone adjustment
You can adjust the color and the tone while
the DVD video and Video CD are being
played.
COLOR ”RED”:
Strengthens the red color of the screen.
COLOR ”GREEN”:
Strengthens the green color of the screen.
TONE ”+”: Strengthens the tone of the
screen.
TONE ””: Weakens the tone of the screen.
UNG407
Depending on the position of the head-
light switch, the screen changes to the
day mode or night mode.
To display the screen in the day mode even
with the head light switch on, touch ”DAY
MODE” on the adjustment screen for bright-
ness and contrast control.
However, if the instrument panel light control
switch is turned fully to the right, mode
switching cannot be done. It remains in the
day mode. In this case, ”DAY MODE” is not
shown on the screen.
If the screen is set in the day mode with the
headlight switch turned to on, this condition
is memorized in the system even with the en-
gine turned off.