2003 SUBARU FORESTER remote control

2-13
Keys and doors
– CONTINUED –
system has exited the programming mode.
2. Make sure that the keyless entry system properly
operates by operating each transmitter. Deleting old transmitter codes
The control unit of the keyless entry system has four
memory locations to store transmitter codes, giving it
the ability to operate with up to four transmitters. When
you lose a transmitter, the lost transmitter’s code re-
mains in the memory. For security reasons, lost trans-
mitter codes should be deleted from the memory.
To delete old transmitter codes, program four trans-
mitter codes into the system. If you have only one cur-
rent transmitter, program it four times. If you have two
current transmitters, program each one twice. If you
have three current transmitters, program two of them
once and the third one twice. This process will leave
only current transmitter codes in the system’s memo- ry.
NOTE
Make sure no one else is operating their keyless
entry system within range of your vehicle when
programming transmitters. If someone else were
to operate their remote transmitter while you are
programming your transmitters, it is possible that
their transmitter code will be programmed into
your system, allowing them unauthorized access to your vehicle.

3-32
Instruments and controls
determine the actual size and distance of ob-
jects that you view in convex mirror.
Remote control mirror switch
1) Selection switch
2) Direction control switch
The remote control mirrors operate only when the ig-
nition switch is in the “ON” or “ACC” position.
1. Press either end of the selection switch, “L” for the
left, “R” for the right.
2. Move the direction control switch in the direction
youwanttomovethemirror. 3. Return the selection switch to the neutral position
to prevent unintentional operation.
The mirrors can also be adjusted manually.
Outside mirror defogger
1) Outside mirror defogger switch (if equipped)
2) Outside mirror defogger and Windshield wiper deicer switch (if equipped)
The outside mirror defogger operates only when the
ignition switch is in the “ON” position.
To turn on the outside mirror defogger, push the
switch. To turn it off, push the switch again. The indi-
cator light located on the switch lights up while the out-
MIRRMIRROROR
LR1
2
HS3041BB
12
HS3046AB

12-6
Specifications
Fuses and circuits
Fuse panel located behind the coin tray
1
23456
78 91011
12
13 14 15
16 17 18 19
20 21 22 23
HSC001BB
Fuse panelFuse ratingCircuit
115AHeater fan
215AHeater fan
315APower door lock
Remote keyless entry
420ACigarette lighter
Remote controlled rear
view mirrors
510ATail light
Parking light
615ASRS airbag
715AFog light
820AABS solenoid
915ARadio
10Empty
1115AEngine ignition system
SRS airbag
AT control system

14-2
Index
A
ABS ................................................................ 7-22
Warning light ...................................... 3-12, 7-23
Accessory power outlet .................................. 6-9
Active head restraint ....................................... 1-7
Air cleaner element ........................................ 11-19
Air filtration system ......................................... 4-18
Aluminum wheel ............................................. 11-44
Aluminum wheel Cleaning .............................. 10-3
Ambient temperature gauge ........................... 3-9
Antenna system ............................................. 5-2
Anti-lock brake warning light (ABS) ........ 3-12, 7-23
Arming the system .......................................... 2-14
Ashtray ........................................................... 6-14
Audio set ........................................................ 5-3
Auto-dimming mirror/compass ....................... 3-29
Automatic/Emergency Locking Retractor
(A/ELR) ....................................................... 1-14
Automatic climate control system .................... 4-10
Automatic transmission .................................. 7-14 Capacities .................................................. 12-4
Fluid ........................................................... 11-24
Selector lever ............................................. 7-15
Shift lock release ....................................... 7-18
Temperature warning (AT OIL TEMP) ....... 3-12 B
Battery ............................................................. 11-49
Jump starting .............................................. 9-9
Replacing (remote keyless entry) . .............. 2-9
Brake
Booster ....................................................... 11-32
Fluid ............................................................ 11-30
Pad and lining ............................................. 11-36
Parking ....................................................... 11-37
Pedal .......................................................... 11-33
System ....................................................... 7-21
Warning light .............................................. 3-13
Braking ............................................................ 7-21
Braking tips ..................................................... 7-21
Brake pedal ..................................................... 11-33 Free play .................................................... 11-33
Reserve distance ........................................ 11-33
Breaking-in of new brake pads and linings ..... 11-36 Bulb Chart ........................................................... 12-9
Replacing ................................................... 11-54
C
Capacities ....................................................... 12-4
Cargo area cover (if equipped) ....................... 6-16
Cargo area light ............................................... 6-2
Cargo tie-down hooks ..................................... 6-18