2003 SUBARU FORESTER audio

5-31
Audio
– CONTINUED –
In-dash 6 CD auto changer (if equipped) Loading and unloading compact discs
(1) (2)
(3)
(4)
HS5016BB
(1) Disc slot
(2) Disc indicators (disc No.1 to 6)
(3) Disc select buttons (disc No.1 to
6)
(4) Eject button

5-32
Audio

Donotattempttoinserttwoormorediscs
into the slot at a time. Doing so can cause me-
chanical damage to the CD changer. Use only music CDs identified by
am ark .
Do not use CDs listed below which could
cause damage to the CD player.
3-inch (8 cm) compact disc.
Any disc with a peel-off or seal on it.
Any disc with scratches and/or dust.
Bent disc.
Cleaning disc.
CD accessory. (E.g., 3-inch (8 cm) disc
adapter)
Do not insert or remove any disc when the
automatic transmission selector lever is in the
park position; the selector lever in that position
can interfere with disc insertion or removal,
causing scratches on the disc surface (for AT
vehicles).
To insert a disc
1. Press one of the “Disc select” buttons (3) (num-
bered from 1 to 6) for which the disc indicator light (2) is “OFF”.
The Disc indicator lights are located directly above the
corresponding “Disc select” buttons.
2. The indicator will begin blinking. The blinking will
last for 15 seconds.
During this period, insert a desired disc, and the disc
will begin to play. (If any disc is not inserted during this
period, the “Disc slot” (1) door will close. Repeat step
1.)
Be sure to hold a disc with the label side (the side
where titles are printed) up.
3. To insert another disc, repeat step 1 and 2 choos-
ing a different disc select button.
To insert six discs at a time
1. Press and hold the “Disc select” button number 1
until all disc indicators begin blinking (about 1.5 sec- onds).
2. The indicators will blink for 15 seconds. During this
period, insert desired six discs.
3. When all discs are loaded, the first disc will begin to
play. (If no disc is inserted within this 15 seconds, the
entire disc load sequence will be canceled.) To remove a disc
1. Press the desired one of the “Disc select” buttons
(3) (numbered from 1 to 6) for which the disc indicator
light is on.

5-33
Audio
– CONTINUED –
2. Press the “Eject button” (4). The selected disc will
be ejected and the indicator light will begin blinking.
3. To remove another disc, repeat step 1 and 2
choosing a different “Disc select” button.
(To remove discs when the ignition switch is in the
“Lock” position, press the “Eject” button, and the first
disc will be ejected. Press the “Eject” button again,
and the next disc will be ejected and so on. At this
time, the “Disc select” buttons are disabled.) To remove all discs at one time
1. Press and hold the “Eject” button (4) until all “Disc”
indicators begin blinking (about 1.5 seconds), and the
first disc will be ejected.
2. When the disc is removed, the next one will be
ejected, and so on. To replace a playing disc with another
Simply press the desired one of “Disc select” buttons
(3) (numbered from 1 to 6) or press the “DISC UP” or
“DISC DOWN” button on the radio unit to select the
desired disc, and the disc will begin to play. Disc indicators
Lit: when the corresponding storage tray is occupied
by a disc.
Blinking: Disc player is either in loading, eject or
changing mode. OFF: No disc is loaded or the ignition switch is in the
“LOCK” position.
Function control
Refer to CD changer control operating instructions de-
scribed in the “Type A audio set” section.

5-34
Audio
Precautions to observe when han-
dling a compact disc (CD)
Use only compact discs (CDs) that have the mark
shown above. CD-RWs cannot be used. Also, some
CD-Rs cannot be played.
In cold and/or rainy weather, dew can form inside
the CD player, preventing normal operation. If this
happens, eject the CD and wait for the player to dry
out. Skipping may occur when the CD player is subject-
ed to severe vibration (for example, when the vehicle
is driven on a rough surface).
To remove a disc from the case, press the center of
the case and hold both edges of the disc. If the disc
surface is touched directly, contamination could cause
poor tone quality. Do not touch the disc surface. Use a clean disc whenever possible. If there are de-
posits, wipe the disc surface from the center outward
with a dry, soft cloth. Be sure not to use a hard cloth,
thinner, benzene, alcohol, etc. Do not use any disc that is scratched, deformed, or
cracked. Also, do not use any disc that has a non-stan-
dard shape (for example, a heart shape). Malfunctions
or problems might result. A disc is vulnerable to heat. Never keep it either in
places exposed to direct sunlight, near heaters or in
vehicles parked in the sun or hot days.
HS5017AA

5-35
Audio
– CONTINUED –
HS5018BA

14-2
Index
A
ABS ................................................................ 7-22
Warning light ...................................... 3-12, 7-23
Accessory power outlet .................................. 6-9
Active head restraint ....................................... 1-7
Air cleaner element ........................................ 11-19
Air filtration system ......................................... 4-18
Aluminum wheel ............................................. 11-44
Aluminum wheel Cleaning .............................. 10-3
Ambient temperature gauge ........................... 3-9
Antenna system ............................................. 5-2
Anti-lock brake warning light (ABS) ........ 3-12, 7-23
Arming the system .......................................... 2-14
Ashtray ........................................................... 6-14
Audio set ........................................................ 5-3
Auto-dimming mirror/compass ....................... 3-29
Automatic/Emergency Locking Retractor
(A/ELR) ....................................................... 1-14
Automatic climate control system .................... 4-10
Automatic transmission .................................. 7-14 Capacities .................................................. 12-4
Fluid ........................................................... 11-24
Selector lever ............................................. 7-15
Shift lock release ....................................... 7-18
Temperature warning (AT OIL TEMP) ....... 3-12 B
Battery ............................................................. 11-49
Jump starting .............................................. 9-9
Replacing (remote keyless entry) . .............. 2-9
Brake
Booster ....................................................... 11-32
Fluid ............................................................ 11-30
Pad and lining ............................................. 11-36
Parking ....................................................... 11-37
Pedal .......................................................... 11-33
System ....................................................... 7-21
Warning light .............................................. 3-13
Braking ............................................................ 7-21
Braking tips ..................................................... 7-21
Brake pedal ..................................................... 11-33 Free play .................................................... 11-33
Reserve distance ........................................ 11-33
Breaking-in of new brake pads and linings ..... 11-36 Bulb Chart ........................................................... 12-9
Replacing ................................................... 11-54
C
Capacities ....................................................... 12-4
Cargo area cover (if equipped) ....................... 6-16
Cargo area light ............................................... 6-2
Cargo tie-down hooks ..................................... 6-18