2003 SAAB 9-3 garage door opener

112 Interior equipmentInterior rearview mirror with garage
opener, autodimming function and
compass (certain variants only)
Retain your original garage door opener
(transmitter) for future programming proce-
dures (i.e., new vehicle purchase). It is also
suggested that upon the sale of the vehicle,
the programmed garage opener buttons be
erased for security purposes, see page 113.Preparations for first-time programming
Before programming the garage opener for
the first time, you must delete any factory
codes.
Press and hold buttons 1 and 3 for about
20 seconds until the LED starts to flash.
This deletes the factory codes and initiates
the programming phase.
Programming the garage opener
The garage opener can record and store the
frequencies of three different remote con-
trols.
The battery in the remote control should be
fairly new for programming to work well.
1 Turn the ignition ON.
2 Hold your existing garage door opener
1–3 in. (3–7 cm) below the rearview
mirror. Sit where you can see the LED
(4) during programming.
3 Press the button on the remote control
and the desired button on the rear view
mirror at the same time.
4 The LED will now start to flash, slowly at
first and then rapidly. The rapidly flash-
ing LED indicates that programming is
complete and that you can release the
buttons.
The remote control may stop transmitting
during programming. If so, continue to hold
the button on the rearview mirror and
release and press the button on the remote
control every other second, "cycling" until
programming is completed.
WARNING
Make sure that people and objects are out
of the way of moving door or gate to
prevent potential harm or damage.
When programming the garage opener,
you may be operating a garage door or
gate operator.
Do not use the garage opener with any
garage door opener that lacks the safety
stop and reverse feature as required by
federal safety standards. (This includes
any garage door opener model manufac-
tured before April 1, 1982.). A garage
door opener which cannot detect an
object, signaling the door to stop and
reverse, does not meet current federal
safety standards. Using a garage door
opener without these features increases
risk of serious injury or death.
Buttons for garage opener, autodimming
and compass1–3 Garage opener
4LED
5 Autodimming/compass ON/OFF
6 Compass bearing
ProCarManuals.com

113 Interior equipment
The LED will flash slowly at first and then
rapidly. The rapidly flashing LED indicates
that programming is complete and that you
can release the buttons.
Reprogramming a button that has previ-
ously been programmed
1 Press and hold the desired button on the
rearview mirror for the entire program-
ming sequence.
2 The LED will start to flash slowly after
20 seconds.
3 Hold your existing garage door opener
1–3 in. (3–7 cm) from the rearview
mirror and press the button on the
remote control.
4 Reprogramming is complete when the
LED starts to flash rapidly.
The previous frequency is now erased and
replaced by the new one. Reprogramming
one button does not affect the other buttons.Complete erase
Completely erase the memory of the garage
opener by pressing and holding buttons
1 and 3 simultaneously for 20 seconds.
Confirmation is provided by the LED flash-
ing rapidly for 10 seconds.
A complete erase deletes the frequencies
from all three buttons. It is not possible to
erase the memory of a single button.
Opening a garage door
Press and hold the appropriate button until
the garage door starts to open.
You can of course still use your original
garage door opener even if you have pro-
grammed the garage opener in the rearview
mirror.Garage doors with rolling security codes
Garage doors with rolling security codes
manufactured after 1996 can be identified
as follows:
 Read the instruction manual for the
garage door.
 Programming the garage opener in the
rearview mirror seems to be successful
but the garage door does not open.
 Press and hold the programmed button.
The garage door uses a rolling security
code if the LED flashes rapidly and after
2 seconds shines constantly.
If the garage door remote control uses roll-
ing security codes, proceed as follows
having programmed the garage opener:
1 Localise the button labelled "learn" or
"smart" on the motor unit of the garage
door. The location and color of this
button varies between makes.
2 Press and release the "learn" button on
the motor unit. Step 3 must be
performed within 30 seconds of Step 2.
3 Press the programmed button on the
rearview mirror twice (some garage
doors require the button to be pressed
three times; refer to the door’s instruc-
tion manual).NOTICESwitch off the power supply to the garage
door or gate (or park the car beyond the
range of the remote control) while
programming using the "cycling" method
to prevent damaging the electrical motor.
ProCarManuals.com

252 IndexEESP, anti-skid system
___________ 146
Economical motoring ___________ 153
Electric engine heater ___________ 154
Electric heating, front seats
____ 83
, 92
Electric windows
________________ 99
Electrical system, technical data
___ 240
Electrically adjustable seats
_______ 18
Electronic Stability Program (ESP)
_146
Electronic steering wheel lock
____ 123
Emergency opening of the narrow
backrest
____________________ 119
Emergency operation of the sunroof
104
Engine bay, cleaning
___________ 218
Engine heater
_________________ 154
Engine immobilizer
______________ 45
Engine number
________________ 246
Engine oil, checking
____________ 176
Engine oil, grade
_______________ 238
Engine oil, volume _____________ 239
Engine temperature gauge
________ 60
Engine, description
_____________ 173
Engine, technical data __________ 238
Engines
______________________ 240
Extra electrical socket
___________ 108
FFactors affecting fuel consumption
_153
Filler cap
_____________________ 129Filling up
_____________________ 128
Flat spots, tyres
________________ 217
Folding down the rear seat
_______ 116
Front fog lights
_________________ 74
Front towing eye _______________ 164
Fuel filler flap, emergency opening
__ 52
Fuel gauge
____________________ 61
Fuel grade ____________________ 240
Functions, car alarm
_____________ 50
Fuse panel in luggage compartment
202
Fuse table
____________________ 201
Fuses
_______________________ 199
GGDO, garage door opener
_______ 112
Garage door opener
____________ 112
Gear selector indicator,
automatic transmission
__________ 62
Gearbox number
_______________ 246
Glove compartment _____________ 109
Glove compartment lighting
______ 196
HHandbrake
___________________ 148
Hazard warning lights
____________ 75
Head restraints
_________________ 20
Headlight flasher ________________ 72
Headlight levelling _______________ 73Headlights
_____________________ 72
Heated door mirrors
_____________ 83
Horn
__________________________ 98
Horn button
____________________ 98
IIgnition switch
_________________ 122
Immobilizer
____________________ 45
Important considerations for driving
125
Important information, petrol-engined
cars with catalytic converters
____ 126
Indicator lights
__________________ 54
Instrument illumination, adjusting
___ 73
Interior lighting
_________________ 105
Interior rearview mirror
__________ 111
Intermittent malfunctioning,
central locking
_________________ 40
JJack
_________________________ 214
Jump starting
__________________ 168
KKey
__________________________ 38
Kick-down
____________________ 136
ProCarManuals.com