22-09-2003
PRACTICAL INFORMATION
150
Open the boot lid.
Using the hook 1, secure the boot mat on the screen
bar 2.
This allows access to the hydraulic pump screw.
Press the Allen TM
key adaptor Bfirmly into the bleed
screw 3, then unscrew half a turn. Using the Torx TM
key adaptor C, remove the six plastic
cover bolts 4, located on either side of the boot.
Remove the two plastic covers 5.
Extract the cable buckles 6from the trims.
Note: if a cable buckle is not visible, carefully insert your
hand behind the trim to extract it.
