2003 OLDSMOBILE SILHOUETTE remove seats

Rear Seats
Rear Seat Operation
The rear seats in your vehicle have levers and straps
used to adjust, remove and reinstall the seats. By using
the levers and straps, in the correct order, you can
easily remove the seats from the vehicle.
When you put the seats back in the vehicle, be sure
to follow the label on the back of the seat for proper
location.
Flip and Fold Feature
The rear seats in your vehicle can be folded forward.
Use this feature for exiting and entering third row seats.
1. If the seats have the adjustable head restraints,
push them fully down.
2. Fold the seatback flat
on the seat, by either
pulling on the nylon
strap on the rear of the
seat or lifting up on
the lever located on the
front of the seatback.
If the seat adjusts, slide
it all the way back.
3. Release the rear set of
hooks from the floor
pins by pulling the
nylon strap located
at the base of the seat;
hang on to the strap as
the seat folds forward.
1 -7

To return the seat(s) to the normal position, do the
following:
1. Push the seat back and firmly push the rear hooks
onto the rear floor pins by pushing down on the
rear of the seat.
2. Try to raise the seat to check that it is locked down.
3. Lift the seatback recliner lever or pull the nylon
strap on the back
of the seat and raise the
seatback until it locks upright.
4. Push and pull on the seatback to check that it
is locked.
Split Bench Seats
If you have the third row split bench seat, the seatbacks
can be folded forward or reclined individually and the
seats can be removed individually.
Folding or Rec'3ing the Seatb; ks
If the seatback isn't locked, it could move
forward in a sudden stop or crash. That could
cause injury to the person sitting there. Always
press rearward on the seatback to be sure it
is locked.
The seatbacks on each section of the split bench seat
can be either folded forward or reclined. The following
explains how to use the nylon strap or recliner lever
to fold or recline the seatbacks.
1 -8

Captain Chairs
4.
5.
5.
7.
If the front latches are not attaching correctly,
check that the seat is in the
full rear position.
Firmly push the rear hooks onto the rear floor pins
by pushing down on the rear of the seat.
Try to raise the seat to check that it is locked down.
strap on the back of the seat and raise the
seatback until
it locks upright.
Push and
pull on the seatback to check that it
is locked.
Lift thc scat5ack :ecli!?er !ever e!. ‘=GI! the Ry!X
If your vehicle has the captain’s chairs, the seatbacks
can be folded forward or reclined and the seats can
be removed.
Adjusting the Captain’s Chairs
(Second
Row)
The second row captain’s chairs can be adjusted
forward or rearward.
There are two adjustment levers on each seat.
One is located below the center,
in front of the seat.
The other
is located across the rear of the seat.
Lift up either lever to slide the seat forward or rearward.
Release the lever. Push and pull on the seat to make
sure it is locked into place.
Repeat these steps
for the other section of the split
bench seat.
1-13

Rear Safety Belt Comfort Guides for
Children and Small Adults
Your vehicle may have rear shoulder belt comfort
guides. This feature will provide added safety belt
comfort for older children who have outgrown booster
seats and for smaller adults. When installed on a
shoulder belt, the comfort guide better positions the belt
away from the neck and head.
If your vehicle has a split bench seat in the third row,
there is one guide for each outside passenger position.
To provide added safety belt comfort for children
who have outgrown child restraints and booster seats
and for smaller adults, the comfort guides may be
installed on the shoulder belts. Here’s how to install a
comfort guide and use the safety belt:
1. Remove the guide from its storage pocket on the
side of the seatback.
1-42

Switchbanks
There are two sets of switchbanks located in the front of
the vehicle. The switches will vary with the options
that are
on your vehicle.
Instrument Panel Switchbank
This switchbank is located in the instrument panel below
the comfort controls. The switchbank may include the
rear fan knob, the rear window wiper/washer, the fog
lamps, the traction control and the heated seats. If your
vehicle does not have some of these options, there will be
a biank.
For more information, see each of these features in
the Index. If
your vehicle is not equipped with the optional rear
climate control system, there will be a storage space in
this switchbank. The rubber mat can be removed for
cleaning. Snap the mat into place after cleaning.
Overhead Console Switchbank
This switchbank is located in the overhead console.
The switchbank may include the interior lamps override,
the power sliding door(s)/override, the power rear
quarter windows and the Ultrasonic Rear Parking Aid
(URPA) disable switches. If your vehicle does not have
szme e! ?hese q??lzns, there !vi!! !E E? S!mk.
For more information, see each of these features in
the Index.
3-21