2003 OLDSMOBILE SILHOUETTE radiator cap

[x] Cancel search: radiator cap

Page 308 of 466

OLDSMOBILE SILHOUETTE 2003  Owners Manual Section 5 Service and Appearance  Care 
Service ............................................................ 5.3 
Doing  Your  Own  Service  Work 
......................... 5.3 
Adding  Equipment  to

Page 320 of 466

OLDSMOBILE SILHOUETTE 2003  Owners Manual A. Underhood  Fuse  Block 
B. Remote  Positive (+) Terminal 
C. Windshield  Washer Fluid Reservoir 
D.  Radiator  Pressure  Cap 
E.  Power  Steering  Fluid  Reservoir 
F. Engine  Oil Fill Cap 
G. Engi

Page 332 of 466

OLDSMOBILE SILHOUETTE 2003  Owners Manual The  vehicle  must  be  on  a level surface.  When  your 
engine  is  cold,  the  coolant  level should be  at  the FULL 
COLD  mark,  or  a little  higher.  When your  engine  is 
warm,  the  level

Page 333 of 466

OLDSMOBILE SILHOUETTE 2003  Owners Manual Radiator Pressure  Cap 
Notice: Your radiator  cap is a  pressure-type  cap 
and  must  be tightly  installed  to  prevent  coolant 
loss 
and  possible  engine  damage  from  overheating. 
Be  sure

Page 336 of 466

OLDSMOBILE SILHOUETTE 2003  Owners Manual Cooling System 
When  you  decide  it’s  safe to lift the hood,  here’s  what 
you’ll  see: 
A. Radiator  Pressure  Cap 
B. Electric  Engine  Cooling  Fans 
C.  Coolant  Recovery  Tank  An  elec

Page 337 of 466

OLDSMOBILE SILHOUETTE 2003  Owners Manual The coolant level should be at or  above  the FULL COLD 
mark. If it isn’t,  you  may  have  a  leak at the pressure  cap 
or  in the radiator hoses, heater hoses, radiator, water 
pump  or  somewhe

Page 340 of 466

OLDSMOBILE SILHOUETTE 2003  Owners Manual Steam and scaldi,,,  liquids ,.dm a hot  cooli.., 
system  can 
blow out  and  burn  you  badly.  They 
are  under  pressure,  and  if  you 
turn the  radiator 
pressure  cap 
-- even  a  little -- th

Page 341 of 466

OLDSMOBILE SILHOUETTE 2003  Owners Manual How to Add  Coolant to the Radiator 
Notice: Your  engine  has  a  specific  radiator fill 
procedure. Failure to follow this procedure  could 
cause  your engine  to overheat  and  be  severely 
dama
Page:   1-8 9-16 next >