2003 NISSAN SENTRA parking brake

[x] Cancel search: parking brake

Page 152 of 224

NISSAN SENTRA 2003 B15 / 5.G Owners Manual Parking brake*Check that the lever has the
proper travel and confirm that your vehicle is held
securely on a fairly steep hill with only the parking
brake applied.
Automatic transmission P (Park) posi

Page 153 of 224

NISSAN SENTRA 2003 B15 / 5.G Owners Manual When performing any inspection or maintenance
work on your vehicle, always take care to prevent
serious accidental injury to yourself or damage to
the vehicle. The following are general precau-
tions

Page 160 of 224

NISSAN SENTRA 2003 B15 / 5.G Owners Manual CHECKING ENGINE OIL LEVEL
1. Park the vehicle on a level surface and apply
the parking brake.
2. Start the engine and let it idle until it reaches
operating temperature.
3. Turn off the engine.Wait mo

Page 161 of 224

NISSAN SENTRA 2003 B15 / 5.G Owners Manual 6. Recheck oil level with the dipstick.
It is normal to add some oil between oil
maintenance intervals or during the
break-in period, depending on the severity
of operating conditions.
CAUTION
Oil lev

Page 162 of 224

NISSAN SENTRA 2003 B15 / 5.G Owners Manual cTry to avoid direct skin contact with
used oil. If skin contact is made, wash
thoroughly with soap or hand cleaner
as soon as possible.
cKeep used engine oil out of reach of
children.
CAUTION
Be care

Page 164 of 224

NISSAN SENTRA 2003 B15 / 5.G Owners Manual TEMPERATURE CONDITIONS FOR
CHECKING
cThe fluid level should be checked using the
HOT range on the dipstick after the following
conditions have been met:
– The engine should be warmed up to op-
erati

Page 171 of 224

NISSAN SENTRA 2003 B15 / 5.G Owners Manual 1. Visually inspect each belt for signs of un-
usual wear, cuts, fraying or looseness. If the
belt is in poor condition or is loose, have it
replaced or adjusted by a NISSAN dealer.
2. Have the belts

Page 177 of 224

NISSAN SENTRA 2003 B15 / 5.G Owners Manual If you wax the surface of the hood, be careful not
to let wax get into the washer nozzle
s1. This may
cause clogging or improper windshield washer
operation. If wax gets into the nozzle, remove it
wit
Page:   < prev 1-8 9-16 17-24 25-32 next >