2003 NISSAN SENTRA warning

[x] Cancel search: warning

Page 191 of 224

NISSAN SENTRA 2003 B15 / 5.G Owners Manual cThe original tires have built-in tread
wear indicators. When the wear indica-
tors are visible, the tire(s) should be
replaced.
cImproper service of the spare tire may
result in serious personal inju

Page 192 of 224

NISSAN SENTRA 2003 B15 / 5.G Owners Manual Care of wheels
cWash the wheels when washing the vehicle to
maintain their appearance.
cClean the inner side of the wheels when the
wheel is changed or the underside of the ve-
hicle is washed.
cDo no

Page 205 of 224

NISSAN SENTRA 2003 B15 / 5.G Owners Manual cGAWR (Gross Axle Weight Rating) - maxi-
mum weight (load) limit specified for the front
or rear axle.
DETERMINING VEHICLE LOAD
CAPACITY
The load capacity of this vehicle is determined by
weight, not

Page 206 of 224

NISSAN SENTRA 2003 B15 / 5.G Owners Manual Your new vehicle was designed to be used pri-
marily to carry passengers and cargo. Remember
that towing a trailer places additional loads on
your vehicle’s engine, drive train, steering, brak-
ing

Page 208 of 224

NISSAN SENTRA 2003 B15 / 5.G Owners Manual to the vehicle bumper or axle. Be sure to leave
enough slack in the chains to permit turning
corners.
Trailer lights
Trailer lights should comply with federal and/or
local regulations. When wiring the

Page 209 of 224

NISSAN SENTRA 2003 B15 / 5.G Owners Manual cCrosswinds and rough roads will adversely
affect vehicle/trailer handling, possibly caus-
ing vehicle sway. When being passed by
larger vehicles, be prepared for possible
changes in crosswinds that c

Page 210 of 224

NISSAN SENTRA 2003 B15 / 5.G Owners Manual WARNING
The temperature grade for this tire is es-
tablished for a tire that is properly inflated
and not overloaded. Excessive speed,
under-inflation, or excessive loading, ei-
ther separately or in

Page 211 of 224

NISSAN SENTRA 2003 B15 / 5.G Owners Manual Due to legal requirements in some states and
Canadian Provinces, your vehicle may be re-
quired to be in what is called the “ready condi-
tion” for an Inspection/Maintenance (I/M) test of
the emis