2003 MITSUBISHI MONTERO sensor

Lock Sensor Circuit
AC204169
CONNECTOR : B-30
AF
B-30(B)
AC204170
CONNECTORS : D-23, D-24
DV
D-24(B)
D-23(B)
AC204176BM
CONNECTOR : E-111

AC001680AB
OUTSIDE AIR
TENPERATURE SENSOR
REGISTANCE k
10
8
6
4
2
0
-10
0
10 20 3040
(14)
(32)
(50)(68)
(86)(104)
TEMPERATURE ˚C (˚F)

AC106604
Indicates that the terminal is a
spare one if the device (sensor
in this case) is not provided.
Indicates representative vehicle
body ground point. (Same
number as that of ground point in
GROUNDING LOCATION).
Indicates harness junction where
wire diameter or color changes.
In case two or more connectors
are connected to the same de-
vice, markings indicating the
same connector are connected
by a broken line.
Indicates terminal number.
A broken line indicates that these
connectors are the same interm-
ediate connectors.
Indicates intersections at
which the lead wires are
not connected.
Indicates intersections at
which the lead wires are
connected.
Indicates input/output
to/from control unit
(current flow direction).
InputOutputInput/
output
Indicates current flow downward
or upward as controlled by the
control unit.
AB
Indicates that the diagram comes
from which belongs to the
block in the same circuit.
Indicates a wiring connector which is inside
the equipment and which is not shown in
the wiring harness configuration diagram.
Example C-15-2
Indicates a connector
which is inside the
equipment, numbered
in order starting from 1.
Indicates the connector number shown in
the wiring harness configuration diagram.

DANGER
WARNING
WARNING
ACX00902AB
TA P E
BATTERY
BATTERY CABLE
ACX01318
FRONT IMPACT SENSORS
AB

WARNING
WARNING
WARNING
ACX00591AC
SIDE
IMPACT
SENSOR CENTER
PILLAR
FORWARD
ACX00587AB
SRS-ECU