2003 Mercury Grand Marquis Owner's Manuals

Page 41 of 248

Mercury Grand Marquis 2003  Owners Manuals 1. Slide the door to access the CD
changer magazine.
2. Press
to eject the magazine.
3. Turn the magazine (A) over.
4. Using the disc holder release
knob (C), pull the disc holder (B)
out of the magaz

Page 42 of 248

Mercury Grand Marquis 2003  Owners Manuals If you pull too hard on the disc holder, the disc holder may come
completely out of the magazine. If this happens, reinsert the disc holder
back into the magazine while pressing on the lever (A).
5. L

Page 43 of 248

Mercury Grand Marquis 2003  Owners Manuals Radio power must be turned on to play the CDs in the changer. The
magazine may be stored in the glove box when not being used.
The CD magazine may be inserted or ejected with the radio power off.
ONLY

Page 44 of 248

Mercury Grand Marquis 2003  Owners Manuals CD units are designed to play commercially pressed 12 cm (4.75
in) audio compact discs only. Due to technical incompatibility,
certain recordable and re-recordable compact discs may not
function corre

Page 45 of 248

Mercury Grand Marquis 2003  Owners Manuals RADIO RECEPTION FACTORS
Three factors can affect radio reception:
•Distance/strength.The further an FM signal travels, the weaker it is.
The listenable range of the average FM station is approximate

Page 46 of 248

Mercury Grand Marquis 2003  Owners Manuals MANUAL HEATING AND AIR CONDITIONING SYSTEM
(IF EQUIPPED)
Fan speed control
Controls the volume of air circulated
in the vehicle.
Temperature control knob
Controls the temperature of the
airflow inside

Page 47 of 248

Mercury Grand Marquis 2003  Owners Manuals •Floor – Distributes outside air through the floor ducts. The air cannot
be cooled below the outside temperature.
•Mix – Distributes outside air through the floor ducts, the windshield
defrost

Page 48 of 248

Mercury Grand Marquis 2003  Owners Manuals To aid in side window defogging/demisting in cold weather conditions:
1. Select Vent.
2. Set the temperature control to full heat.
3. Set the fan speed to full fan.
4. Direct the outer panel vents tow