2003 MERCEDES-BENZ SLK 230 KOMPRESSOR fuel additives

Contents
Installing....................................... 228
Flat tire .............................................. 229
Preparing the vehicle.................... 229
Sealing tires with TIREFIT kit 1 ..... 229
Sealing tires with TIREFIT kit 2 ..... 234
Mounting the spare wheel ............ 238
Battery ............................................... 245
Disconnecting the battery ............ 246
Removing the battery ................... 246
Charging and reinstalling battery . 246
Reconnecting the battery ............. 246
Jump starting ..................................... 247
Towing the vehicle ............................. 249
Towing eye ................................... 251
Installing towing eye bolt.............. 252
Fuses ................................................. 253
Main fuse box ............................... 253
Auxiliary fuse box ......................... 254
Technical data.................................. 255
Spare parts service ............................ 256
Warranty coverage ............................. 257
Loss of Service and Warranty
Information Booklet...................... 257
Identification labels............................ 258Layout of poly-V-belt drive ................. 259
SLK 230 Kompressor ................... 259
SLK 320 ....................................... 259
SLK 32 AMG................................. 259
Engine................................................ 260
Rims and Tires ................................... 261
Same size tires ............................. 262
Mixed size tires ............................ 263
Spare wheel with collapsible tire.. 265
Electrical system ............................... 266
Main Dimensions ............................... 267
Weights.............................................. 268
Fuels, coolants, lubricants etc. .......... 269
Capacities .................................... 269
Engine oils.................................... 271
Engine oil additives ...................... 271
Air conditioning refrigerant .......... 271
Brake fluid .................................... 271
Premium unleaded gasoline ......... 272
Fuel requirements ........................ 272
Gasoline additives ........................ 272
Coolants....................................... 273
Windshield and headlamp*
washer system ............................. 275
Consumer information ....................... 276
Uniform tire quality grading ......... 276
Technical terms............................... 279Index................................................. 285

271 Technical data
Fuels, coolants, lubricants etc.
Engine oils
Engine oils are specifically tested for their
suitability in our engines. Therefore, use
only engine oils recommended by
Mercedes-Benz. Information on recom-
mended brands is available in the Factory
Approved Service Products pamphlet, or at
your authorized Mercedes-Benz Center.
Please follow FSS or Service Booklet rec-
ommendations for scheduled oil changes.
F ai lu re to d o s o could res ul t in engi ne da m -
age not covered by the Mercedes-Benz
Limited Warranty.
Engine oil additives
Do not blend oil additives with engine oil.
They may be harmful to the engine opera-
tion.
Damage or malfunctions resulting from
blending oil additives are not covered by
the Mercedes-Benz Limited Warranty.Air conditioning refrigerant
R-134a (HFC) refrigerant and special
PAG lubricating oil is used in the air condi-
tioning system.
Never use R-12 (CFC) or mineral-based
lubricating oil, otherwise damage to the
system will occur.
Brake fluid
During vehicle operation, the boiling point
of the brake fluid is continuously reduced
through the absorption of moisture from
the atmosphere. Under extremely strenu-
ous operating conditions, this moisture
content can lead to the formation of bub-
bles in the system, thus reducing the sys-
tem’s efficiency.
Therefore, the brake fluid must be re-
placed every two years, preferably in the
spring.
Only brake fluid approved by
Mercedes-Benz is recommended. Your au-
thorized Mercedes-Benz Center will pro-
vide you with additional information.

272 Technical dataFuels, coolants, lubricants etc.Premium unleaded gasoline
Fuel requirements
Use only premium unleaded gasoline
meeting ASTM standard D 439:

The octane number (posted at the
pu mp ) m us t b e 91 mi n. It is an a ve ra ge
of both the Research (R) octane num-
ber and the Motor (M) octane number:
(R+M) / 2). This is also known as the
ANTI-KNOCK INDEX.
Unleaded gasoline containing oxygenates
such as ethanol, IPA, IBA and TBA can be
used provided the ratio of any one of these
oxygenates to gasoline does not exceed
10%; MTBE not to exceed 15%.
The ratio of methanol to gasoline must not
exceed 3% plus additional cosolvents.
Using mixtures of ethanol and methanol is
not allowed. Gasohol, which contains 10%
ethanol and 90% unleaded gasoline, can be
used.
These blends must also meet all other fuel
requirements, such as resistance to spark
knock, boiling range, vapor pressure etc..
Gasoline additives
A major concern among engine manufac-
turers is carbon build-up caused by gaso-
line. Mercedes-Benz recommends only the
use of quality gasoline containing additives
that prevent the build up of carbon depos-
its.
After an extended period of using fuels
without such additives, carbon deposits
can build up especially on the intake valves
and in the combustion area, leading to
engine performance problems such as:

Warm-up hesitation


Unstable idle


Knocking/pinging


Misfire


Power loss
Do not blend any specific fuel additives
with fuel. This only results in unnecessary
costs and may be harmful to engine opera-
tion.
!To maintain the engine’s durability and
performance, premium unleaded gaso-
line must be used. If premium unleaded
is not available and low octane fuel is
used, follow these precautions:

Have the fuel tank only partially
filled with unleaded regular and fill
up with premium unleaded as soon
as possible.


Avoid full throttle driving and abrupt
acceleration.


Do not exceed an engine speed of
3000 rpm if the vehicle is loaded
with a light load such as two per-
sons and no luggage.


Do not exceed
2/3of maximum ac-
celerator pedal position if the vehi-
cle is fully loaded or operating in
mountainous terrain.

273 Technical data
Fuels, coolants, lubricants etc.
Damage or malfunctions resulting from
poor fuel quality or from blending specific
fuel additives are not covered by the
Mercedes-Benz Limited Warranty.Coolants
The engine coolant is a mixture of water
and anticorrosion / antifreeze, which pro-
vides:

Corrosion protection


Freeze protection


Boiling protection (by increasing the
boiling point)
The cooling system was filled at the factory
with a coolant providing freeze protection
to approximately -22°F (-30°C) and corro-
sion protection.
If the antifreeze mixture is effective to
-22°F (-30°C), the boiling point of the cool-
ant in the pressurized cooling system is
reached at approximately 266°F (130°C).The coolant solution must be used
year-round to provide the necessary corro-
sion protection and increase boil over-pro-
tection. You should have it replaced every
15 years or 150 000 miles (250 000 km),
whichever comes first. Coolant system de-
sign and coolant used stipulate the re-
placement interval. The above
replacement interval is only applicable if
MB 325.0 anticorrosion/antifreeze solu-
tion or other Mercedes-Benz approved
products of equal specification (see Facto-
ry Approved Service Products pamphlet)
are used to renew the coolant concentra-
tion or bring it back up to the proper level.
To provide important corrosion protection,
the solution must be at least 45% anticor-
rosion/antifreeze (equivalent to freeze
protection to approx. -22°F [-30°C]). If you
use a solution that is more than 55% anti-
corrosion/antifreeze (freeze protection to
approx. -49°F [-45°C]), the engine temper-
ature will increase due to the lower heat
transfer capability of the solution. There-
fore, do not use more than this amount of
anticorrosion/antifreeze.If the coolant level is low, water and MB
Anticorrosion /Antifreeze should be used
to bring it up to the proper level (have cool-
ing system checked for signs of leakage).
Please make sure that the mixture is in ac-
cordance with label instructions.
The water in the cooling system must meet
minimum requirements, which are usually
satisfied by normal drinking water. If you
are not sure about the water quality, con-
sult your authorized Mercedes-Benz
Center.

291 Index
Fuel 169
Additives 272
Fuel reserve warning lamp 201
Gasoline additives 272
Premium unleaded gasoline 169,
272
Requirements 272
Reserve warning 21
Technical data 269
Fuel additives 272
Fuel filler flap 169
Locking 169
Opening 213
Unlocking 169
Fuel requirements 272
Fuel tank
Capacity 270
Filler flap 169
Fuels, coolants, lubricants etc.
Capacities 269
Fuse chart 253
Fuse extractor 253
Fuses 253
Auxiliary fuse box 254
Fuse chart 253
Fuse extractor 253Main fuse box 253
Spare fuses 253
G
Garage door opener 25, 152
Erasing in remote control 155
Integrated remote control 153
Rolling code programming 154
Gasoline see Fuel 169
Gasoline additives 272
Gear range 280
Automatic transmission* 95
Limiting 95
Shifting into optimal 94
Gear range limit
Canceling 94
Gear selector lever
Cleaning 191
Position 96
Global
Locking 75
Unlocking 75
Global Positioning System (GPS) 280
Glove box 19, 139
Closing 139
Opening 139
Good visibility 99GPS 280
H
Hand-held transmitter
Programming integrated remote
control 153
Hands-free microphone 25
Hard plastic trim items
Cleaning 191
Hazard warning flasher 85
Switching off 85
Switching on 85
Head restraints 82
Installing 82
Manual seats 32
Removing 82
Headlamp cleaning system 179
Headlamps
Cleaning 189
Cleaning system 179
Cleaning system* 100
Refilling washer fluid 179
Switching off 48
Switching on 43
Washer fluid 275
Washer system 275
Xenon* 283

298 IndexSpare fuses 253
Spare parts service 256
Spare wheel 207
Bolts 207
Mounting 238
Speed
Saving current 137
Speed settings
Cruise control 138
Speedometer 21
SRS 59, 282
Indicator lamp 197
Standing lamps 83
Replacing bulbs 221, 222, 224
Standing water
Driving instructions 165
Starting difficulties 41
Starting position 29
Starting the engine 40
Steering column
Height adjustment 34
Length adjustment 34
Steering lock 19, 29
Positions 29
Steering wheel
Adjustment 34Cleaning 191
Stolen vehicle
Tracking services 152
Storage compartments 140
Armrest 141
Center console 140
Glove box 139
Sun visors 101
Supplemental Restraint System
(SRS) 282
Switching off
Audio system 115
Engine 48
ESP 70
Hazard warning flasher 85
Headlamps 48
Seat heating* 81
Switching on
Audio system 115
ESP 70
Front fog lamps 84
Hazard warning flasher 85
Headlamps 43
High beams 85
Rapid seat heating* 81
Rear fog lamp 84Seat heating* 81
Windshield wipers 44
Synchronizing
Power windows 128
Synchronizing the remote control 213
T
Tachometer 21, 89
Displaying gear range 95
Overspeed range 89
Tail lamps
Cleaning 189
Replacing bulbs 222, 225
Tar stains 188
Technical data 271
Brake fluid 271
Coolant 269
Coolants 273
Electrical system 266
Engine 260
Engine oil 271
Engine oil additives 271
Fuel requirements 272
Fuels 269
Gasoline additives 272
Lubricants 269
Main dimensions 267