2003 MERCEDES-BENZ SL500 change wheel

[x] Cancel search: change wheel

Page 284 of 376

MERCEDES-BENZ SL500 2003 R230 Owners Manual 284 Practical hintsWhat to do if …Left display
Right display
Possible cause
Possible solution
H
Tire pressure, RR 
Caution
tire defect!
The right rear tire is rapidly deflat-
ing.

Carefully bring

Page 285 of 376

MERCEDES-BENZ SL500 2003 R230 Owners Manual 285 Practical hints
What to do if …
Left display
Right display
Possible cause
Possible solution
H
Tire pressure, FL
Check tires!
The left front tire pressure is low.

Carefully bring the vehicle to

Page 288 of 376

MERCEDES-BENZ SL500 2003 R230 Owners Manual 288 Practical hintsWhere will I find ...?
Where will I find ...?First aid kit
The first aid kit is located in storage space 
under the passenger seat.
1Handle
2Lid
Pull the handle 1 up.

Fold the li

Page 308 of 376

MERCEDES-BENZ SL500 2003 R230 Owners Manual 308 Practical hintsFlat tireSealing tires with TIREFIT kit 2
Small tire punctures, particularly those in 
the tread, can be sealed with TIREFIT.
TIREFIT can be used in ambient tempera-
tures down to -

Page 312 of 376

MERCEDES-BENZ SL500 2003 R230 Owners Manual 312 Practical hintsFlat tireMounting the spare wheel Preparing the vehicle
Prepare the vehicle as described above 
(
page 302).

Turn spare wheel bracket counter-
clockwise to loosen.

Take the whe

Page 313 of 376

MERCEDES-BENZ SL500 2003 R230 Owners Manual 313 Practical hints
Flat tire

On wheel to be changed, loosen but do 
not yet remove the wheel bolts (ap-
proximately one full turn with wrench). 
The jack support tubes are located behind 
the front

Page 352 of 376

MERCEDES-BENZ SL500 2003 R230 Owners Manual 352 Technical termsCockpit
All instruments, switches, buttons and 
indicator/warning lamps in the passen-
ger compartment needed for vehicle 
operation and monitoring.
Collapsible tire
An especially c

Page 353 of 376

MERCEDES-BENZ SL500 2003 R230 Owners Manual 353 Technical terms
Gear range
Number of gears which are available to 
the automatic transmission for shifting. 
The automatic gear shifting process 
can be adapted to specific operating 
conditions u
Page:   < prev 1-8 9-16 17-24 25-32 next >