2003 MERCEDES-BENZ S-Class key

133 Navigation
Destination input
Altering the map scale
8Scale selector
Current map scale _
New map scale ?
9Square shows the map section which is
to be increasedZooming in for more detailed map

Press %.
The scale selector will appear and
show the current _ and the next larger
scale ?.
Square 9 shows the map detail which
is to be recalculated.

Press the right-hand rotary/push-
button v.
iAs you move the crosshairs towards the
edge of the screen using the number
keys, an adjacent section of the map is
activated. It may take a few seconds to
point to each new map.
Adjacent map sections overlap some-
what so that destinations at the edge of
the map can be marked as well.
P82.85-9442-31USP82.85-9442-31US
139
RESERVOIR NO 3
1
0.5 mi
0.05mi 5 mi 500 mi
8
9
iYou can continue to increase the scale
within 5 seconds
Press key %.

Turn the right-hand rotary/push-
button v to the left.
A division mark corresponds to an avai-
lable scale. You can select 13 different
scales ranging from 0.05 miles/inch to
500 miles/inch.

135 Navigation
Destination input
Destination entry via coordinates
You can enter a destination if the corres-
ponding coordinates are known.“Coordinate Destination” menu
Turn the right-hand rotary/push-button
v to highlight “Coordinate Destinati-
on...” in the Destination via Map menu
(page 131) and press to confirm.
The “Coordinate Destination” input
menu will appear.

Enter coordinates with the number
keys.
Activating the adjustment mode and alte-
ring the setting

Press the right-hand rotary/push-
button v.

Turn the right-hand rotary/push-button
v.
or

Enter coordinates with the number
keys.
Store the new setting and move the mar-
king to the next entry

Press the right-hand rotary/push-
button v and turn the button.

Subsequently repeat operating se-
quence and enter coordinates comple-
tely.Changing between western (W) and eas-
tern (E) longitude

Press / repeatedly.
Changing between northern (N) and
southern (S) latitude

Press % repeatedly.
NAVI Coordinate DestnLongitude
° 58´ 14.9´´ W
Latitude
040° 45´ 28.5´´ N 073
P82.85-9443-31US
iAdjustment range
Longitude (W - West or E - East)
0-179° 0-59 min
0-59 s 0.1-0.9 s

Latitude (N - North or S - South)
0-89° 0-59 min
0-59 s 0.1-0.9 s

153 Navigation
Route guidance
If an audio source is switched on, e.g. the
radio, the voice output will be mixed with
that of the audio source.
You can individually set the audio volume
differential between voice output/audio
source (
page 64). COMAND mutes navi-
gation voice outputs during telephone/
Tele Aid operation.
Repeating current voice output

Press the left-hand rotary/push-button
v briefly.
Muting current voice output

Press o briefly during a voice out-
put. You will hear the next announce-
ment normally.Switching the voice output off for the
duration of the current route guidance

Press o longer than 2 seconds du-
ring a voice output.
You will see the message “Voice output
is muted”.
Switching the voice output on again
The current route guidance has been com-
pleted.
Voice output will automatically switch on
again.
During route guidance

Press the left-hand rotary/push-button
v.Altering the voice output volume
At the COMAND control unit

Turn the turning wheel on the left-hand
rotary/push-button v during a voice
output.
COMAND will accept this setting for
following voice outputs.
At the multifunctional steering wheel
You can alter the volume with the steering
wheel keys during a voice output as well.
To raise the volume

Press J.
To lower the volume

Press I.

170 NavigationRoute guidanceDuring route guidance (you see either sym-
bol or map display) you can select another
COMAND system by pressing the corres-
ponding key.
The main menu of the selected audio sour-
ce will appear and you will e.g. hear the
radio.
Route guidance and the navigation’s voice
output remain active.
The voice output is added to the audio
playback.
You can individually adjust the volume le-
vels for voice output and audio playback
(page 64).

Press c.
The main radio menu will appear.
The station last tuned to will begin to
play.

Selecting a station (
page 30).
Returning to navigation system

Press b.During route guidance, you can operate an
audio source that is active in the back-
ground. Although the options are limited,
you can operate the audio source without
having to fully switch to the corresponding
system.
1A window is shown in the symbol or
map display, providing details about
the active audio source
Activating audio system
Activating audio functions
P82.85-9486-31US
RECTOR ST
Map
Stop
Mix
RECTOR STFM 1
97.1 FM
1

171 Navigation
Route guidance
Removing the window
This is done automatically after 3 seconds.
or
Press *.
The radio is active

Selecting a memorized station from the
respective memory (FM, AM or WB)
Press number keys 1 through 0.

Performing station seek
Press g or h briefly.

Starting manual search
Press g or h longer than
2 seconds.
The search run will start in the desi-
red direction - frequency ranges
FM, AM or WB.
Fine-tuning

Release g or h.

Press g or h briefly.CD mode is active

Selecting CD with number keys
0 CD drive
1 - 6 CD changer

Selecting previous/next track
Press g or h briefly.

Skipping backwards/forwards
Hold g or h longer than
2 seconds.

196 Info Services/System settingsSystem settingsAdopting settings
Press the right-hand rotary/push-
button v longer than 2 seconds.
The main system settings menu will ap-
pear with the changed settings.
With the number keys

Enter date and time using the number
keys 0 through 9.
The cursor moves onto the next entry if
you enter a value completely, e.g. “06”
for the month.
Adopt the settings as described above.Selecting the time format
1Date display in day, month format
2Date display in month, day format
3Time display in 24-hour format
4Time display in 12-hour format
P Setting is active
Q Setting is not activeIn the “Date/Time” menu

Turn the right-hand rotary/push-button
v to highlight “Time Format” and
press to confirm.
The “Time Format” menu will appear.
Setting

Turn the right-hand rotary/push-button
v to highlight the desired entry and
press to confirm. A checkmark will ap-
pear P.
iIf you have selected an invalid setting,
the message “Invalid input” will appear.
P82.85-9526-31US
SYS Time Format
Date Display: DD.MM
Time Display: 24h
Time Display: AM/PM Date Display: MM.TT
1243
iIf the 12-hour format is selected, either
AM (a
nte m
eridiem) or PM (p
ost m
eri-
diem) will appear after the time.

210 IndexSMS 103
deleting 105
Incoming SMS message 9
Sound 63
Setting Bass/Treble/Balance 65
Sound impressions 66
Sound-center
Balance 64
Fader 64
Speed dialing (only with COMAND) 95
Station
Radio station
Automatic station scan 33
Manual tuning 31
Seek tuning 30
selecting 30
Station selection via direct frequen-
cy entry 32
Station selection via number key-
pad (presets) 32Station frequency 28
Storing
in the phone book 102
Notebook input 97
Street list 127
Switch on
Radio operation 28
Switching another system on
CD mode 28
Radio operation 50
Switching off
Beeps 197
COMAND control unit 13
Mix 157
Telephone mode 79
Switching on
Auxiliary audio source 200
Beeps 197
CD operation 15, 50COMAND control unit 12
Mix 157
Navigation 122
Navigation system 17
Radio operation 14
Telephon operation 16
Telephone mode 78
Symbol display 144
T
Travelling abroad 114
V
Voice output
“Bear left after 250 feet” 155
“Please bear left” 155
“Please, make the next right
turn” 143
“Prepare to turn right” 154