2003 MERCEDES-BENZ M-Class lights

6 Introduction
Symbols
Symbols
You will find the following symbols in these
operating instructions:
* An asterisk identifies optional
equipment. Since the MCS will vary
according to the items ordered with
it, certain descriptions and illustra-
tions may be different.This symbol points to instructions for
you to follow.
A number of these symbols appearing
in succession indicates a multiple-step
procedure.
(
page 7) This symbol tells you where
to look for additional infor-
mation on a subject.
The continuation symbol
marks an interrupted proce-
dure which will be continued
on the next page.
Display Words appearing in the
MCS display are printed in
the type shown here.
WarningG
Warning notices draw your attention to
hazards that may endanger your health or
life, or the health or life of others.
!
Highlights hazards that may result in
damage to your MCS
i
Helpful hints or additional information
you may find useful.


82 Navigation
Important notes
Important notes
WarningG
For safety reasons, you should only enter a
destination when the vehicle is stationary.
When the vehicle is in motion, a passenger
should enter the destination. Study manual
and select route before driving.
Do not watch display screen or operate but-
tons while the vehicle is in motion- let voice
instructions guide you. Stop at a safe loca-
tion before using buttons or making correc-
tions.
Traffic regulations always have priority over
any route recommendations given.
The route calculated by the MCS is a
recommendation on how to best reach your
selected destination.
During route guidance, you will not receive
any information on
Traffic lights
Stop and yield signs
Parking or stopping zones
One-way streets
Narrow bridges
Similar traffic regulation data
You should therefore always strictly observe
traffic regulations while driving. Drive care-
fully and always obey traffic laws and road
signs even if they contradict the MCS
instructions.
WarningG
The DVD reader contains a Class 1 laser
product. There is a danger of invisible laser
radiation if the cover is opened or damaged.
Do not remove the cover. The DVD reader
does not contain any parts which can be ser-
viced by the user. For safety reasons, have
any service work which may be necessary
performed only by qualified personnel.
!
MCS calculates the route with the help
of data stored on the navigation DVD.
Only use Mercedes-Benz navigation
DVDs. Using other navigation DVDs
might lead to malfunctions.
Because of changes in local traffic pat-
terns (e.g. road work) and/or incom-
plete data, errors in calculation may
occur.
As a result, the recommended route
may deviate from the ideal route. The
data stored on the DVD only reflects lo-
cal conditions at the time of produc-
tion. DVD maps do not cover all areas
nor all routes within an area.

140
Info Services/System settings
System settings
System settings
When the parking lights are turned on, the
display switches to the dark mode and au-
tomatically dims the display.
Audio mode
Press the softkey “ADJ” in any
audio menu.
The main audio adjust menu appears
and the current settings are displayed.
If you want to switch to the light mode,
press the softkey “LGHT”.
or
If you want to switch to the dark mode,
press the softkey “DARK”.
Navigation mode
Press any softkey in the naviga-
tion mode.
The softkeys are activated.
If you want to switch to the light mode,
press the softkey “LGHT”.
or
If you want to switch to the dark mode,
press the softkey “DARK”.Adjusting the brightness
in the dark mode
You can adjust the display brightness of
your MCS in conjunction with your vehicles
instrument clusters illumination.
Please refer to your Operator’s Manual for
additional instructions.
Switching between the light and the
dark mode

141
Info Services/System settings
System settings
You can set the monitor’s dimming charac-
teristics for the navigation mode.
Press .
Use the joystick to select the menu
“SYSTEM SETUP” and press .
Select the “Display Setup” menu
by pushing the joystick up or down and
press .
The display menu appears with the
current settings.
Select the “Map Color” menu by
pushing the joystick up or down and
press .You can select from 3 display dimming
modes:

“Day” mode: The display colors are al-
ways bright.

“Night” mode: The display colors are al-
ways dark.

“Auto” mode: The display switches au-
tomatically between Night and Day
mode when the parking lights are
turned on and off.
After selecting the mode, press .
To return to the setup mode, use the
joystick to select “Return” and press
.
Setting the display dimming character-
istics
P82.85-9566-31
P82.85-9577-31