2003 MERCEDES-BENZ M-Class stop start

46 Audio
Tape operation
When this function is activated, you can
play back the first 8 seconds of each track
in succession.
Activating scan
Press the softkey “SCAN”.Scan begins. “SCAN” is highlighted in
the softkey menu and “SCANNING” is
displayed in the tape menu.
Cancelling scan
Press the highlighted softkey
“SCAN”.
or
Push the joystick in any direction.
Playback resumes with the desired
track.When this function is activated, the unit
skips blank segments longer than 15 sec-
onds. The unit fast forwards to the next
track or side and start playing it.
Starting blank skip
Press the softkey “SKIP”.
Blank skip begins. “SKIP” is highlighted
in the softkey menu. If a blank section
is detected “SKIPPING BLANK SEC-
TION” is displayed in the tape menu.
Tape scan
i
The scan function does not work prop-
erly unless there is enough blank tape
(approx. 2 seconds) separating the indi-
vidual tracks.
i
At the end of the tape, the tape auto-
matically switches to the other side and
scan stops.
Blank skip

56 Audio
CD operation
MCS with single CD player*
CD operation begins:

Automatically, by inserting a CD
(
page 51)
The playback starts at Track 1.

By pressing when a CD is already
inserted in the CD slot, playback starts
at Track 1.
The telephone functions can be used while
a CD is playing.
To stop CD playback
Eject the CD, switch to the radio or
tape mode, or switch off the MCS.MCS with CD changer*
CD changer operation begins:

Press when CDs are inserted in
the CD changer (
page 52).
The playback starts at Track 1 of the
first CD.
The telephone and navigation functions
can be used while a CD is playing.
To stop CD playback
Switch to the radio or tape mode or
switch off the MCS.
Switching CD operation on and off
i
The navigation functions can be used
while a CD is playing in the CD-changer.
MCS with navigation system:
Navigation is only possible when a nav-
igation DVD is inserted in the single CD
player.

57 Audio
CD operation
MCS with single CD player* and CD chang-
er*
If you press , the MCS starts the CD
mode that was last activated. To switch be-
tween CD modes, press again.
Single CD player playback
Single CD player playback begins:

Automatically, by inserting a CD, page
42
The playback starts at Track 1.

By pressing when a CD is already
inserted in the CD slot, playback starts
at Track 1.
To stop CD playback
Eject the CD
or
Switch to the radio, tape or CD changer
or
Switch off the MCSCD changer playback
CD changer operation begins:

By pressing when CDs are insert-
ed in the CD changer, page 43.
Playback starts at Track 1.
To stop CD playback
Switch to the radio
or
Switch to tape or single CD player
mode
or
Switch off the MCSThe following error messages can appear
after is pressed:
“NO CD” - there is no CD inserted. In-
sert a CD.

“CD ERROR” - the inserted CD can not
be read. The CD may be inserted incor-
rectly, be damaged, or is not an audio
CD. The CD may be copy protected. If it
is a recorded CD (instead of a stamped
CD), the quality may be poor or the for-
matting incorrect.
Error messages

115 Navigation
Route guidance
Adding a stopover to the route
Whenever a destination is set and calculat-
ed, the system allows you to create a stop-
over along the way.
Start route guidance.
Enter a desired stopover destination.
In the Confirm Destination menu, se-
lect “Add as Stopover to
Route” and press .
The desired destination is added to the
route.Cancelling the current destination
To activate the softkeys, press any
softkey.
Press the softkey “STOP”.
A window appears confirming the stop
request.
If you wish to delete the current desti-
nation, use the joystick to select “YES”
and press .
The current destination is cancelled.
or
If you don’t wish to continue:

Use the joystick to select “NO”
and press

Press .

Wait 10 seconds
The stop request is cancelled.Changing the route calculation mode dur-
ing guidance

Press .

Use the joystick to select “ROUTE
FUNCTIONS” and press .
The Route Select menu appears.
P82.85-9670-31
P82.85-9566-31