2003 MERCEDES-BENZ M-Class audio

132 Navigation
Settings

Use the joystick to select “Guidance
Setup” and press .
The Guidance Setup menu appears. Use the joystick to select
“Guidance” and press .
The Guidance menu appears.
Use the joystick to select one of the fol-
lowing guidance modes and press .

“Hybrid”: The basic guidance
screen is displayed during a maneu-
ver. Once the maneuver is com-
plete, the MCS returns to the
detailed map display or the respec-
tive audio display.

“Arrow”: The Basic Guidance
screen is displayed at all times.

“Map”: The Detailed Map screen is
displayed at all times.
Use the joystick to save the settings,
select “Return” and press .
P82.85-9576-31P82.85-9593-31

139
Info Services/System settings
Info Services
After new information has been download-
ed, the message “NEW INFO RECEIVED
READ LATER WHEN STOPPED” ap-
pears.
By pressing the softkey “YES”,
you switch back to the current back-
ground audio mode (e. g. radio mode).
By pressing the softkey “NO”, the
new information is displayed immedi-
ately.
With the softkeys and
or with the joystick you can flip
to the next or previous page.
To exit the info service mode, switch to
the radio, tape or CD mode, or switch
off the MCS.
i
If Info Services can not be retrieved,
one of the following error messages is
displayed:

“DATA CONNECTION CANNOT
BE ESTABLISHED” - request has
failed because the Response Center
can not be accessed.

“TELE AID PLEASE VISIT
WORKSHOP” - a hardware error has
been detected. Contact your autho-
rized Mercedes-Benz Center.

“INFO SERVICE NOT ACTI-
VATED” - Info Services is not acti-
vated. You must activate Tele Aid at
the Response Center and select the
optional Info Services.
If one of the above error messages is
displayed, press the softkey
“RTN” to return to Info Services display.
WarningG
A driver's attention to the road must always
be his/her primary focus when driving.
For your safety and the safety of others, we
recommend that you pull over to a safe loca-
tion and stop the vehicle before requesting
or receiving any info services.

140
Info Services/System settings
System settings
System settings
When the parking lights are turned on, the
display switches to the dark mode and au-
tomatically dims the display.
Audio mode
Press the softkey “ADJ” in any
audio menu.
The main audio adjust menu appears
and the current settings are displayed.
If you want to switch to the light mode,
press the softkey “LGHT”.
or
If you want to switch to the dark mode,
press the softkey “DARK”.
Navigation mode
Press any softkey in the naviga-
tion mode.
The softkeys are activated.
If you want to switch to the light mode,
press the softkey “LGHT”.
or
If you want to switch to the dark mode,
press the softkey “DARK”.Adjusting the brightness
in the dark mode
You can adjust the display brightness of
your MCS in conjunction with your vehicles
instrument clusters illumination.
Please refer to your Operator’s Manual for
additional instructions.
Switching between the light and the
dark mode