2003 MERCEDES-BENZ M-Class light

82 Navigation
Important notes
Important notes
WarningG
For safety reasons, you should only enter a
destination when the vehicle is stationary.
When the vehicle is in motion, a passenger
should enter the destination. Study manual
and select route before driving.
Do not watch display screen or operate but-
tons while the vehicle is in motion- let voice
instructions guide you. Stop at a safe loca-
tion before using buttons or making correc-
tions.
Traffic regulations always have priority over
any route recommendations given.
The route calculated by the MCS is a
recommendation on how to best reach your
selected destination.
During route guidance, you will not receive
any information on
Traffic lights
Stop and yield signs
Parking or stopping zones
One-way streets
Narrow bridges
Similar traffic regulation data
You should therefore always strictly observe
traffic regulations while driving. Drive care-
fully and always obey traffic laws and road
signs even if they contradict the MCS
instructions.
WarningG
The DVD reader contains a Class 1 laser
product. There is a danger of invisible laser
radiation if the cover is opened or damaged.
Do not remove the cover. The DVD reader
does not contain any parts which can be ser-
viced by the user. For safety reasons, have
any service work which may be necessary
performed only by qualified personnel.
!
MCS calculates the route with the help
of data stored on the navigation DVD.
Only use Mercedes-Benz navigation
DVDs. Using other navigation DVDs
might lead to malfunctions.
Because of changes in local traffic pat-
terns (e.g. road work) and/or incom-
plete data, errors in calculation may
occur.
As a result, the recommended route
may deviate from the ideal route. The
data stored on the DVD only reflects lo-
cal conditions at the time of produc-
tion. DVD maps do not cover all areas
nor all routes within an area.

85 Navigation
Quick reference
FunctionPage
1Color display
2Delete the last input, re-
turn to previous screen
3Press to:
Open and close the con-
trol panel
The CD/DVD slot and
button are located
behind the control panel.
86
4Press to:
Switch the MCS on and
off
Turn to:
Set the volume differ-
ence between an audio
source and navigation
voice during an an-
nouncement
14
16
FunctionPage
5Entering address num-
bers
6Altering the map scale
7Pushing Joystick:
Moves cursor
Pressing :
Confirm selection
8Switching the navigation
system on
Activating the navigation
menu90
9Repeating current (last)
voice instruction
10Altering the map scale114
FunctionPage
11Softkeys for:
“DETR”: Detour
“STOP”: Cancels the
current destination,
“LIST”: Lists the ma-
neuver
“MUTE”: Mutes the voice
instructions
“LGHT”: Changes be-
tween light and dark
mode
“MAP”: Changes be-
tween map screen and
maneuver screen, re-
turning to the map
To activate the softkey
functions, press any soft-
key
119
115
113
114
140

108 Navigation
Destination input
Selecting a destination using the map
If you are not in the map mode, press
any softkey in the navigation
mode.
The softkeys are activated.
Press the softkey “MAP”.
The map and the vehicle’s current posi-
tion icon are displayed.
Move the joystick.
The map cursor moves on the map.
Use the joystick to move the map cur-
sor to the desired destination.
If you have found the desired destina-
tion, press .
The closest street segment or point of
interest to the selected destination is
highlighted and the name appears on
the display.
If this destination is acceptable, press
.
The Confirm Destination menu will ap-
pear.or
If this destination is not acceptable,
move the map cursor to the desired
destination.
For a detailed view, press .
Confirming a Destination
Once the complete address is entered, the
Confirm Destination menu appears.
P82.85-9575-31
P82.85-9565-31

112 Navigation
Route guidance
Route guidance
After you select the destination and the
route is calculated, the navigation system
uses both pictorial displays and voice
prompts to guide you to the destination.
When the route is calculated, the display
switches to the map mode or to the ma-
neuver screen.The system announces “Proceed to the
highlighted Route” and the display shows
“Please Proceed”. The route is now in
progress.
While the system is guiding you on your
route, you can be manually change the dis-
play between modes. The Guidance Dis-
play mode shows an arrow indicating the
next maneuver.
Press the joystick to the right to preview
the next maneuver. Press the joystick to
the left to return to the current maneuver.
i
After entering the destination, you can
change to an audio source. If you have
selected the Hybrid or Arrow mode
(
page 131), the Guidance Display
comes up when a maneuver is started.
The voice instructions are announced
simultaneously.

113 Navigation
Route guidance
The Detailed Map display shows a moving
map with the recommended route high-
lighted in blue.
Press the softkey “MAP” to change
the display. To activate the softkeys, press
any softkey. Voice instructions announce all maneu-
vers. The instructions are announced be-
fore a maneuver is required. For example,
you may hear an announcement, “In one
half mile, make a right turn”.
When it is time to perform the maneuver,
you will hear an announcement, “Right turn
ahead.”
To repeat the verbal announcement, press
the key.
To set the volume (
page 16).
To mute the voice instructions
(
page 114).Press the softkey “LIST” to display
the maneuver list. To activate the softkeys,
press any softkey.
To preview the arrow guidance screen for a
particular maneuver, use the joystick to
scroll down the list and select a maneuver
and press .
Press softkey “MAP” to return to the
original guidance screen or wait 10 sec-
onds and the display automatically returns
to the original guidance screen.

114 Navigation
Route guidance
If you programmed the address and name,
they are displayed when you reach your
final destination.Muting voice instructions
Activate the softkeys by pressing any
softkey. Press the softkey “MUTE.”
to mute the voice instructions. The softkey
“MUTE” is highlighted.
To cancel the mute function, press the
highlighted softkey “MUTE”.
If you press , the system gives the
current voice instruction even when
“MUTE” is switched on.Altering the map scale
You can increase or decrease the level of
detail in the map mode.
Press to zoom in (increase detail)
Press to zoom out (decrease de-
tail).

126 Navigation
Destination memory
In the Confirm Destination menu, use
the joystick to select “Options” and
press .
The Options menu appears. In the Options menu, use the joystick
to select “Add to Today’s Plan”
and press .
The Today’s Plan list is displayed and the
added destination is highlighted.
Press , the system returns to the Find
Destination menu. You can now enter a
destination to add additional entries to To-
day’s Plan.Using Today’s Plan
Press .
Use the joystick to select “INPUT
DESTINATION” and press .
The Find Destination by menu appears.
Use the joystick to select “Today’s
Plan” and press .
P82.85-9565-31P82.85-9584-31
P82.85-9566-31

138
Info Services/System settings
Info Services
Info Services
The following chapter provides detailed in-
formation on how to:

Request and display Info Services*

Switch between the light and the dark
mode

Set the display dimming characteris-
tics

Select the language/unit of measure

Set time

View system information
If you have not already done so, please fa-
miliarize yourself with these functions by
reading the chapter "At a glance"
(
page 9).When subscribed to Info Services, you can
download information directly to your
MCS. You can select from news, weather,
sports, stocks, and calendar reminders.
To personalize your selections, visit

www.MBUSA.com
or call

1-800-FOR-MERCedes.
Press SSVC.
The info service menu appears and the
last information the MCS received is
displayed.
If no information is stored, the message
“NO INFORMATION STORED IN
MEMORY PLEASE UPDATE” appears.
To retrieve information or update the
existing information, press the softkey
“UPDT”.
i
This function is not available in some
countries.
Requesting and displaying
InfoServices*
i
Before you can receive Info Services,
you must activate Tele Aid at the
Response Center and select the Info
Services option.